v1.2.59：修复首页接口传输 2.9MB（列表瘦身 + gzip）+ 二维码只存 uuid

① 根因：GET /api/task/list 每次返回约 2.9MB。ListTasks 用 Find 返回整行 CpTask（含 longtext 的 formData），
   而历史数据里 formData 存过 base64 图片（id=133 的 qrCode 单条 2,959,961 字节，实为 4032x3024 现场照片），
   且 nginx gzip_types 未覆盖 application/json，明文传输。该任务创建于 09-18 13:25，与“今天突然变慢”吻合。
   实测：任务仅 62 条，form_data 合计 515 万字节；某 IP 单日拉取 53 次 ≈ 99MB。

② 列表瘦身：ListTasks 改返回轻量 DTO TaskListItem（不含 formData），并新增服务端预计算的 missingFields
   （用已加载的 formData 计算，零额外 IO）。新增 GET /task/form-data/:id 返回该任务已保存表单，供编辑弹窗预填
   （/task/form/:id 是从今日校园重拉模板会丢已填值，不能替代）。前端 executeTask 预检改用 missingFields，
   openEditModal 改走新接口；TaskInfo.formData 改为可选。

③ 二维码只存 uuid：新增 POST /task/qr/decode，复用后端已有 gozxing 解析（不引入新库），
   前端上传后仅保存 uuid（Prompt：中文名“二维码ID”，colName=uuid），不再写入整张 base64 图片。
   关键修正：ExtractQrUuid 原先只认 32 位 hex 裸串，而链接里的 uuid 允许 [0-9a-zA-Z_-]+，
   仅存裸 uuid 会导致非 hex 学校执行时解析失败 → 新增 bareTokenPattern（8~64 位 token）分支，
   并让 fillScanSubmitForm 兼容 uuid/qrCode 双字段名（旧数据不受影响）。

④ gzip：在应用层加 fiber compress 中间件（nginx 由 1Panel 托管、跨 5 站点、不进版本库，不宜直改），
   用 Next 排除 SSE 端点 /api/task/execute/*（流式响应不可缓冲）。

⑤ 验证：go build、go vet、go test ./...（新增裸 uuid/非 hex uuid/字段归一化用例）、vue-tsc --noEmit、npm run build 全过。
   不清理历史 base64 数据（按要求暂不动）。

.woodpecker/build.yml

@@ -29,37 +29,67 @@ steps:
       # 应用配置由宿主机 /opt/cpdaily-xiaozhushou/config.toml 运维维护
       # （已移出版本库，避免密钥入库；容器以只读挂载方式读取）
 
+      # 两个固定槽位（蓝/绿），任一时刻都保持"两个容器都活着"：
+      #   活跃槽 = 反代当前指向的端口；备用槽 = 另一个端口（上一版，供秒级回滚）
+      SLOT_BLUE=8884
+      SLOT_GREEN=8885
+
       # ============================================================
-      # 第一步：读取当前反代端口，确定蓝绿状态
+      # 第一步：读取当前反代指向的端口，确定活跃/备用槽
       # 反代入口为 1Panel 站点 jinrixiaoyuan.top（frps 公网链路）：
       # /www/sites/jinrixiaoyuan.top/proxy/root.conf → proxy_pass http://127.0.0.1:8884|8885
+      # 该文件经 conf.d/jinrixiaoyuan.top.conf 的 include /www/sites/.../proxy/*.conf 载入。
       # ============================================================
       CURRENT_PORT=$(docker exec 1Panel-openresty-ESmn \
         grep -oE 'proxy_pass http://[0-9.]+:[0-9]+' \
         /www/sites/jinrixiaoyuan.top/proxy/root.conf | grep -o '[0-9]\+$')
       echo "=== 当前反代端口: $CURRENT_PORT ==="
 
-      if [ "$CURRENT_PORT" = "8884" ]; then
-        PORT_ACTIVE=8884
-        PORT_STANDBY=8885
-      elif [ "$CURRENT_PORT" = "8885" ]; then
-        PORT_ACTIVE=8885
-        PORT_STANDBY=8884
+      if [ "$CURRENT_PORT" = "$SLOT_BLUE" ]; then
+        PORT_ACTIVE=$SLOT_BLUE
+        PORT_STANDBY=$SLOT_GREEN
+      elif [ "$CURRENT_PORT" = "$SLOT_GREEN" ]; then
+        PORT_ACTIVE=$SLOT_GREEN
+        PORT_STANDBY=$SLOT_BLUE
       else
-        echo "ERROR: 未知反代端口 $CURRENT_PORT，中止部署（期望 8884/8885）"
+        echo "ERROR: 未知反代端口 $CURRENT_PORT，中止部署（期望 $SLOT_BLUE/$SLOT_GREEN）"
         exit 1
       fi
-      echo "   活跃: $PORT_ACTIVE | 备用: $PORT_STANDBY"
-
-      # 清理之前可能残留的临时容器
-      docker rm -f cpdaily-xiaozhushou-new 2>/dev/null || true
+      echo "   活跃槽: $PORT_ACTIVE | 备用槽: $PORT_STANDBY"
+      echo "   目标: 更新备用槽 :$PORT_STANDBY 到 $IMAGE_TAG 后，切换反代指向它（活跃槽保留，可回滚）"
 
       # ============================================================
-      # 第二步：在备用端口启动新容器
+      # 第一步附：一次性「收养」旧命名容器
+      # 迁移前的容器名为 cpdaily-xiaozhushou（无端口后缀），本脚本改用
+      # cpdaily-xiaozhushou-<端口>。若不改名，下次部署 rm -f 找不到它 → 端口
+      # 被占用导致 docker run 冲突、部署失败。此处按它实际映射的端口改名（幂等）。
+      # 同时清理历史遗留的 cpdaily-blue 陈尸容器。
       # ============================================================
-      echo "=== 蓝绿部署: 启动新容器 on :$PORT_STANDBY (image: $IMAGE_TAG) ==="
+      LEGACY_NAME=cpdaily-xiaozhushou
+      if docker inspect "$LEGACY_NAME" >/dev/null 2>&1; then
+        LEGACY_PORT=$(docker port "$LEGACY_NAME" 8093 2>/dev/null | head -1 | grep -oE '[0-9]+$' || true)
+        if [ -n "$LEGACY_PORT" ]; then
+          if docker inspect "cpdaily-xiaozhushou-$LEGACY_PORT" >/dev/null 2>&1; then
+            echo "   发现旧命名容器，但 cpdaily-xiaozhushou-$LEGACY_PORT 已存在，移除旧容器"
+            docker rm -f "$LEGACY_NAME" || true
+          else
+            echo "   收养旧命名容器: $LEGACY_NAME → cpdaily-xiaozhushou-$LEGACY_PORT"
+            docker rename "$LEGACY_NAME" "cpdaily-xiaozhushou-$LEGACY_PORT"
+          fi
+        else
+          echo "   旧命名容器未映射 8093 端口，跳过收养"
+        fi
+      fi
+      docker rm -f cpdaily-blue 2>/dev/null || true
 
-      docker run -d --name cpdaily-xiaozhushou-new \
+      # ============================================================
+      # 第二步：更新「备用槽」容器（此槽当前无流量，停它不会影响线上）
+      # ============================================================
+      echo "=== 停止并移除备用槽旧容器（:$PORT_STANDBY）==="
+      docker rm -f cpdaily-xiaozhushou-$PORT_STANDBY 2>/dev/null || true
+
+      echo "=== 在备用槽启动新容器 :$PORT_STANDBY (image: $IMAGE_TAG) ==="
+      docker run -d --name cpdaily-xiaozhushou-$PORT_STANDBY \
         --restart unless-stopped \
         --network likedream-net \
         -e TZ=Asia/Shanghai \
@@ -68,73 +98,92 @@ steps:
         cpdaily-xiaozhushou:$IMAGE_TAG
 
       # ============================================================
-      # 第三步：健康检查
+      # 第三步：健康检查（新容器必须就绪，否则直接失败且不动反代）
+      # 用 docker exec 在容器内自测，避免依赖宿主机到容器的网络路径。
       # ============================================================
       HEALTHY=false
-      for i in $(seq 1 15); do
-        if wget -q --timeout=3 -O /dev/null http://10.10.10.128:$PORT_STANDBY/health 2>/dev/null; then
+      for i in $(seq 1 30); do
+        if docker exec cpdaily-xiaozhushou-$PORT_STANDBY \
+             wget -q --timeout=3 -O /dev/null http://127.0.0.1:8093/health 2>/dev/null; then
           HEALTHY=true
           break
         fi
-        echo "  等待新容器就绪... ($i/15)"
+        echo "  等待新容器就绪... ($i/30)"
         sleep 2
       done
 
       if [ "$HEALTHY" = false ]; then
-        echo "ERROR: 新容器未通过健康检查，回滚"
-        docker stop cpdaily-xiaozhushou-new
-        docker rm cpdaily-xiaozhushou-new
+        echo "ERROR: 新容器未通过健康检查，中止部署（线上仍由活跃槽 :$PORT_ACTIVE 提供服务，未受影响）"
+        docker rm -f cpdaily-xiaozhushou-$PORT_STANDBY 2>/dev/null || true
         exit 1
       fi
       echo "   新容器已就绪 ✓"
 
       # ============================================================
-      # 第四步：切换 1Panel 反代到备用端口
+      # 第四步：切换 1Panel 反代到备用槽（唯一一次代理切换）
+      # 切换前先备份配置，nginx -t 通过后再 reload；reload 后等待旧 worker 退出，
+      # 确保旧连接不再按旧配置转发。
       # ============================================================
       echo "=== 切换 1Panel 反代 :$PORT_ACTIVE → :$PORT_STANDBY ==="
+      PROXY_CONF=/www/sites/jinrixiaoyuan.top/proxy/root.conf
       docker exec 1Panel-openresty-ESmn \
-        sed -i "s|:$PORT_ACTIVE|:$PORT_STANDBY|g" \
-        /www/sites/jinrixiaoyuan.top/proxy/root.conf
-      docker exec 1Panel-openresty-ESmn nginx -s reload
-      echo "   Nginx 热加载完成（零中断）✓"
-
-      # ============================================================
-      # 第五步：停止旧容器
-      # ============================================================
-      echo "=== 清理旧容器 ==="
-      docker stop cpdaily-xiaozhushou 2>/dev/null || true
-      docker rm cpdaily-xiaozhushou 2>/dev/null || true
-
-      # ============================================================
-      # 第六步：在活跃端口启动正式容器
-      # ============================================================
-      echo "=== 启动正式容器 on :$PORT_ACTIVE ==="
-      docker run -d --name cpdaily-xiaozhushou \
-        --restart unless-stopped \
-        --network likedream-net \
-        -e TZ=Asia/Shanghai \
-        -p $PORT_ACTIVE:8093 \
-        -v /opt/cpdaily-xiaozhushou/config.toml:/app/config.toml:ro \
-        cpdaily-xiaozhushou:$IMAGE_TAG
-
-      # ============================================================
-      # 第七步：切回 1Panel 反代到活跃端口
-      # ============================================================
-      echo "=== 切回 1Panel 反代 :$PORT_STANDBY → :$PORT_ACTIVE ==="
+        cp $PROXY_CONF $PROXY_CONF.bak
       docker exec 1Panel-openresty-ESmn \
-        sed -i "s|:$PORT_STANDBY|:$PORT_ACTIVE|g" \
-        /www/sites/jinrixiaoyuan.top/proxy/root.conf
-      docker exec 1Panel-openresty-ESmn nginx -s reload
-      echo "   Nginx 热加载完成（零中断）✓"
+        sed -i "s|:$PORT_ACTIVE|:$PORT_STANDBY|g" $PROXY_CONF
 
-      # ============================================================
-      # 第八步：清理
-      # ============================================================
-      echo "=== 清理 ==="
-      docker rm -f cpdaily-xiaozhushou-new 2>/dev/null || true
-      docker images cpdaily-xiaozhushou --format '{{.Tag}}' | grep -v latest | head -n -3 | while read tag; do
-        docker rmi cpdaily-xiaozhushou:$tag 2>/dev/null || true
+      if ! docker exec 1Panel-openresty-ESmn nginx -t 2>&1; then
+        echo "ERROR: nginx 配置校验失败，回滚反代配置"
+        docker exec 1Panel-openresty-ESmn cp $PROXY_CONF.bak $PROXY_CONF
+        docker rm -f cpdaily-xiaozhushou-$PORT_STANDBY 2>/dev/null || true
+        exit 1
+      fi
+
+      # 记录 reload 前的 worker pid，reload 后等其全部退出，避免旧 worker 按旧配置继续转发
+      OLD_WORKERS=$(docker exec 1Panel-openresty-ESmn \
+        sh -c 'ps -eo pid,cmd | grep "[n]ginx: worker" | awk "{print \$1}"' | tr '\n' ' ')
+      docker exec 1Panel-openresty-ESmn nginx -s reload
+      echo "   Nginx 热加载完成，等待旧 worker 退出..."
+
+      for i in $(seq 1 15); do
+        STILL=0
+        for p in $OLD_WORKERS; do
+          if docker exec 1Panel-openresty-ESmn sh -c "[ -d /proc/$p ]" 2>/dev/null; then
+            STILL=$((STILL + 1))
+          fi
+        done
+        if [ "$STILL" = "0" ]; then
+          echo "   旧 worker 已全部退出 ✓"
+          break
+        fi
+        echo "  等待旧 worker 释放连接... ($i/15, 剩余 $STILL)"
+        sleep 2
       done
-      echo "=== 部署完成 ✓ ==="
+      echo "   反代已指向 :$PORT_STANDBY ✓"
+
+      # ============================================================
+      # 第五步：验证线上确实由新槽服务
+      # ============================================================
+      if ! docker exec 1Panel-openresty-ESmn \
+           sh -c "wget -q --timeout=5 -O /dev/null http://127.0.0.1:$PORT_STANDBY/health" 2>/dev/null; then
+        echo "WARN: 新槽健康检查异常，但反代已切换，请人工核查"
+      else
+        echo "   线上验证通过（:$PORT_STANDBY 正常服务）✓"
+      fi
+
+      # ============================================================
+      # 第六步：保留活跃槽用于回滚说明；清理多余历史镜像
+      # 注：旧槽容器不删除 —— 它即上一版本，仍需回滚时可直接把反代切回。
+      #     下次部署时旧槽会被当作「备用槽」重建，因此不会无限堆积。
+      # ============================================================
+      echo "=== 当前容器 ==="
+      docker ps --filter "name=cpdaily-xiaozhushou-" --format '{{.Names}} → {{.Ports}} ({{.Status}})'
+
+      echo "=== 清理历史镜像（保留 latest 与最近 2 个版本）==="
+      docker images cpdaily-xiaozhushou --format '{{.Tag}}' \
+        | grep -v '^latest$' | head -n -2 | while read tag; do
+          docker rmi cpdaily-xiaozhushou:$tag 2>/dev/null || true
+        done
+
+      echo "=== 部署完成 ✓ 活跃槽 :$PORT_STANDBY（旧槽 :$PORT_ACTIVE 保留，可回滚）==="
     volumes:
       - /var/run/docker.sock:/var/run/docker.sock

backed/cmd/server/main.go

@@ -4,6 +4,7 @@ import (
 	"fmt"
 	"log"
 	"net/http"
+	"strings"
 	"time"
 
 	"cpdaily-new/internal/config"
@@ -14,6 +15,7 @@ import (
 	"cpdaily-new/internal/service"
 
 	"github.com/gofiber/fiber/v2"
+	"github.com/gofiber/fiber/v2/middleware/compress"
 	"github.com/gofiber/fiber/v2/middleware/filesystem"
 )
 
@@ -55,6 +57,18 @@ func main() {
 	// 中间件
 	app.Use(middleware.CORS())
 
+	// gzip 压缩：nginx 侧 gzip_types 未覆盖 application/json，接口返回的 JSON
+	// （历史上曾出现单次 2.9MB 的任务列表）会明文传输。在此按内容协商压缩，
+	// 随镜像走版本控制、只影响本服务。
+	// 必须排除 SSE 端点（/api/task/execute/*）：它用 SetBodyStreamWriter 流式推送，
+	// 压缩会缓冲响应导致事件无法即时到达。
+	app.Use(compress.New(compress.Config{
+		Level: compress.LevelBestSpeed, // 纯 CPU 敏感场景，优先速度
+		Next: func(c *fiber.Ctx) bool {
+			return strings.HasPrefix(c.Path(), "/api/task/execute/")
+		},
+	}))
+
 	// 路由
 	api := app.Group("/api")
 
@@ -63,6 +77,8 @@ func main() {
 	auth.Get("/captcha", handler.GetCaptcha)
 	auth.Get("/schools", handler.SearchSchools)
 	auth.Post("/login", handler.Login)
+	auth.Post("/login/mfa", handler.MFAVerify)
+	auth.Post("/login/mfa/send", handler.MFASendCode)
 	auth.Post("/refresh", handler.RefreshToken)
 	auth.Get("/userinfo", middleware.AuthRequired(), handler.GetUserInfo)
 	auth.Post("/generate-invite", middleware.AuthRequired(), handler.GenerateMyInviteCode)
@@ -78,6 +94,8 @@ func main() {
 	task.Get("/form/:id", handler.GetTaskForm)
 	task.Post("/form/:id", handler.SaveTaskForm)
 	task.Put("/form/:id", handler.SaveTaskForm)
+	task.Get("/form-data/:id", handler.GetTaskSavedForm)
+	task.Post("/qr/decode", handler.DecodeTaskQr)
 	task.Put("/update/:id", handler.UpdateTask)
 	task.Delete("/delete/:id", handler.DeleteTask)
 	task.Get("/execute/:id", handler.ExecuteTask)
@@ -86,6 +104,19 @@ func main() {
 	task.Post("/upload-policy", handler.GetUploadPolicy)
 	task.Post("/preview-url", handler.GetPreviewUrl)
 
+	// 销假（请假销假）
+	leave := api.Group("/leave", middleware.AuthRequired())
+	leave.Get("/pending-list", handler.GetPendingLeaves)
+	leave.Post("/approvers", handler.GetLeaveApprovers)
+	leave.Post("/execute", handler.ExecuteLeave)
+	leave.Get("/logs", handler.ListLeaveLogs)
+	leave.Delete("/logs/:id", handler.DeleteLeaveLog)
+	// 请假申请（同模块）
+	leave.Get("/types", handler.GetLeaveTypes)
+	leave.Post("/apply-approvers", handler.GetLeaveApplyApprovers)
+	leave.Post("/cc-search", handler.GetLeaveNewCcSearch)
+	leave.Post("/apply", handler.ExecuteLeaveApply)
+
 	// CDK 兑换
 	cdk := api.Group("/cdk", middleware.AuthRequired())
 	cdk.Post("/redeem", handler.UserRedeemCDK)

backed/config.toml.example

@@ -19,6 +19,8 @@ dbname = "xiaozhushou"
 secret = "dev-only-change-me-please"
 accessExpire = 3600
 refreshExpire = 864000
+# MFA 通道登录短期 token 有效期（秒）：与第三方 Cookie 对齐，默认 7200（2 小时）
+mfaAccessExpire = 7200
 
 [captcha]
 width = 150
@@ -29,7 +31,7 @@ length = 4
 appVersion = "9.8.8"
 systemVersion = "iOS 17"
 calVersion = "first_v4"
-sliderIds = ["1018764144934965", "sdhyxy", "hqdx"]
+sliderIds = ["1018764144934965", "sdhyxy", "hqdx", "lntu"]
 captchaBaseUrl = "http://127.0.0.1:8890"
 captchaApiKey = "your_captcha_api_key"
 

backed/go.mod

@@ -6,11 +6,12 @@ require (
 	github.com/BurntSushi/toml v1.6.0
 	github.com/PuerkitoBio/goquery v1.12.0
 	github.com/go-resty/resty/v2 v2.16.5
-	github.com/go-sql-driver/mysql v1.8.1
 	github.com/gofiber/fiber/v2 v2.52.13
 	github.com/golang-jwt/jwt/v5 v5.3.1
+	github.com/makiuchi-d/gozxing v0.1.1
+	github.com/redis/go-redis/v9 v9.7.0
 	golang.org/x/crypto v0.50.0
-	golang.org/x/time v0.6.0
+	golang.org/x/image v0.46.0
 	gorm.io/driver/mysql v1.6.0
 	gorm.io/gorm v1.31.2
 )
@@ -21,6 +22,7 @@ require (
 	github.com/andybalholm/cascadia v1.3.3 // indirect
 	github.com/cespare/xxhash/v2 v2.2.0 // indirect
 	github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f // indirect
+	github.com/go-sql-driver/mysql v1.8.1 // indirect
 	github.com/google/uuid v1.6.0 // indirect
 	github.com/jinzhu/inflection v1.0.0 // indirect
 	github.com/jinzhu/now v1.1.5 // indirect
@@ -28,14 +30,12 @@ require (
 	github.com/mattn/go-colorable v0.1.13 // indirect
 	github.com/mattn/go-isatty v0.0.20 // indirect
 	github.com/mattn/go-runewidth v0.0.16 // indirect
-	github.com/redis/go-redis/v9 v9.7.0 // indirect
 	github.com/rivo/uniseg v0.2.0 // indirect
-	github.com/tidwall/match v1.1.1 // indirect
 	github.com/valyala/bytebufferpool v1.0.0 // indirect
 	github.com/valyala/fasthttp v1.51.0 // indirect
 	github.com/valyala/tcplisten v1.0.0 // indirect
-	golang.org/x/image v0.46.0 // indirect
 	golang.org/x/net v0.52.0 // indirect
 	golang.org/x/sys v0.48.0 // indirect
 	golang.org/x/text v0.42.0 // indirect
+	golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 // indirect
 )

backed/go.sum

@@ -8,6 +8,10 @@ github.com/andybalholm/brotli v1.1.0 h1:eLKJA0d02Lf0mVpIDgYnqXcUn0GqVmEFny3VuID1
 github.com/andybalholm/brotli v1.1.0/go.mod h1:sms7XGricyQI9K10gOSf56VKKWS4oLer58Q+mhRPtnY=
 github.com/andybalholm/cascadia v1.3.3 h1:AG2YHrzJIm4BZ19iwJ/DAua6Btl3IwJX+VI4kktS1LM=
 github.com/andybalholm/cascadia v1.3.3/go.mod h1:xNd9bqTn98Ln4DwST8/nG+H0yuB8Hmgu1YHNnWw0GeA=
+github.com/bsm/ginkgo/v2 v2.12.0 h1:Ny8MWAHyOepLGlLKYmXG4IEkioBysk6GpaRTLC8zwWs=
+github.com/bsm/ginkgo/v2 v2.12.0/go.mod h1:SwYbGRRDovPVboqFv0tPTcG1sN61LM1Z4ARdbAV9g4c=
+github.com/bsm/gomega v1.27.10 h1:yeMWxP2pV2fG3FgAODIY8EiRE3dy0aeFYt4l7wh6yKA=
+github.com/bsm/gomega v1.27.10/go.mod h1:JyEr/xRbxbtgWNi8tIEVPUYZ5Dzef52k01W3YH0H+O0=
 github.com/cespare/xxhash/v2 v2.2.0 h1:DC2CZ1Ep5Y4k3ZQ899DldepgrayRUGE6BBZ/cd9Cj44=
 github.com/cespare/xxhash/v2 v2.2.0/go.mod h1:VGX0DQ3Q6kWi7AoAeZDth3/j3BFtOZR5XLFGgcrjCOs=
 github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f h1:lO4WD4F/rVNCu3HqELle0jiPLLBs70cWOduZpkS1E78=
@@ -29,6 +33,8 @@ github.com/jinzhu/now v1.1.5 h1:/o9tlHleP7gOFmsnYNz3RGnqzefHA47wQpKrrdTIwXQ=
 github.com/jinzhu/now v1.1.5/go.mod h1:d3SSVoowX0Lcu0IBviAWJpolVfI5UJVZZ7cO71lE/z8=
 github.com/klauspost/compress v1.17.9 h1:6KIumPrER1LHsvBVuDa0r5xaG0Es51mhhB9BQB2qeMA=
 github.com/klauspost/compress v1.17.9/go.mod h1:Di0epgTjJY877eYKx5yC51cX2A2Vl2ibi7bDH9ttBbw=
+github.com/makiuchi-d/gozxing v0.1.1 h1:xxqijhoedi+/lZlhINteGbywIrewVdVv2wl9r5O9S1I=
+github.com/makiuchi-d/gozxing v0.1.1/go.mod h1:eRIHbOjX7QWxLIDJoQuMLhuXg9LAuw6znsUtRkNw9DU=
 github.com/mattn/go-colorable v0.1.13 h1:fFA4WZxdEF4tXPZVKMLwD8oUnCTTo08duU7wxecdEvA=
 github.com/mattn/go-colorable v0.1.13/go.mod h1:7S9/ev0klgBDR4GtXTXX8a3vIGJpMovkB8vQcUbaXHg=
 github.com/mattn/go-isatty v0.0.16/go.mod h1:kYGgaQfpe5nmfYZH+SKPsOc2e4SrIfOl2e/yFXSvRLM=
@@ -36,12 +42,12 @@ github.com/mattn/go-isatty v0.0.20 h1:xfD0iDuEKnDkl03q4limB+vH+GxLEtL/jb4xVJSWWE
 github.com/mattn/go-isatty v0.0.20/go.mod h1:W+V8PltTTMOvKvAeJH7IuucS94S2C6jfK/D7dTCTo3Y=
 github.com/mattn/go-runewidth v0.0.16 h1:E5ScNMtiwvlvB5paMFdw9p4kSQzbXFikJ5SQO6TULQc=
 github.com/mattn/go-runewidth v0.0.16/go.mod h1:Jdepj2loyihRzMpdS35Xk/zdY8IAYHsh153qUoGf23w=
+github.com/mattn/go-sqlite3 v1.14.22 h1:2gZY6PC6kBnID23Tichd1K+Z0oS6nE/XwU+Vz/5o4kU=
+github.com/mattn/go-sqlite3 v1.14.22/go.mod h1:Uh1q+B4BYcTPb+yiD3kU8Ct7aC0hY9fxUwlHK0RXw+Y=
 github.com/redis/go-redis/v9 v9.7.0 h1:HhLSs+B6O021gwzl+locl0zEDnyNkxMtf/Z3NNBMa9E=
 github.com/redis/go-redis/v9 v9.7.0/go.mod h1:f6zhXITC7JUJIlPEiBOTXxJgPLdZcA93GewI7inzyWw=
 github.com/rivo/uniseg v0.2.0 h1:S1pD9weZBuJdFmowNwbpi7BJ8TNftyUImj/0WQi72jY=
 github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=
-github.com/tidwall/match v1.1.1 h1:+Ho715JplO36QYgwN9PGYNhgZvoUSc9X2c80KVTi+GA=
-github.com/tidwall/match v1.1.1/go.mod h1:eRSPERbgtNPcGhD8UCthc6PmLEQXEWd3PRB5JTxsfmM=
 github.com/valyala/bytebufferpool v1.0.0 h1:GqA5TC/0021Y/b9FG4Oi9Mr3q7XYx6KllzawFIhcdPw=
 github.com/valyala/bytebufferpool v1.0.0/go.mod h1:6bBcMArwyJ5K/AmCkWv1jt77kVWyCJ6HpOuEn7z0Csc=
 github.com/valyala/fasthttp v1.51.0 h1:8b30A5JlZ6C7AS81RsWjYMQmrZG6feChmgAolCl1SqA=
@@ -95,8 +101,6 @@ golang.org/x/sys v0.12.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.17.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 golang.org/x/sys v0.20.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 golang.org/x/sys v0.28.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
-golang.org/x/sys v0.43.0 h1:Rlag2XtaFTxp19wS8MXlJwTvoh8ArU6ezoyFsMyCTNI=
-golang.org/x/sys v0.43.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw=
 golang.org/x/sys v0.48.0 h1:bbX/i/6MgT9BVLM9RT1thmxL04yeTAhbEz4SyadbXoo=
 golang.org/x/sys v0.48.0/go.mod h1:hNLxWAXmnKAxqDtdwIYC4bM9oQPEecfsnNMuSxOs3og=
 golang.org/x/telemetry v0.0.0-20240228155512-f48c80bd79b2/go.mod h1:TeRTkGYfJXctD9OcfyVLyj2J3IxLnKwHJR8f4D8a3YE=
@@ -117,10 +121,9 @@ golang.org/x/text v0.13.0/go.mod h1:TvPlkZtksWOMsz7fbANvkp4WM8x/WCo/om8BMLbz+aE=
 golang.org/x/text v0.14.0/go.mod h1:18ZOQIKpY8NJVqYksKHtTdi31H5itFRjB5/qKTNYzSU=
 golang.org/x/text v0.15.0/go.mod h1:18ZOQIKpY8NJVqYksKHtTdi31H5itFRjB5/qKTNYzSU=
 golang.org/x/text v0.21.0/go.mod h1:4IBbMaMmOPCJ8SecivzSH54+73PCFmPWxNTLm+vZkEQ=
-golang.org/x/text v0.36.0 h1:JfKh3XmcRPqZPKevfXVpI1wXPTqbkE5f7JA92a55Yxg=
-golang.org/x/text v0.36.0/go.mod h1:NIdBknypM8iqVmPiuco0Dh6P5Jcdk8lJL0CUebqK164=
 golang.org/x/text v0.42.0 h1:JbOZXgfeCPU9gacVtYliJqOhD+zhrEqK4LfdpmlUZqI=
 golang.org/x/text v0.42.0/go.mod h1:ojzP1Z+2QtioaF8DTtO8K5q7JWVVYwZKenzujK0Zd0E=
+golang.org/x/time v0.6.0 h1:eTDhh4ZXt5Qf0augr54TN6suAUudPcawVZeIAPU7D4U=
 golang.org/x/time v0.6.0/go.mod h1:3BpzKBy/shNhVucY/MWOyx10tF3SFh9QdLuxbVysPQM=
 golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
 golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
@@ -129,7 +132,11 @@ golang.org/x/tools v0.6.0/go.mod h1:Xwgl3UAJ/d3gWutnCtw505GrjyAbvKui8lOU390QaIU=
 golang.org/x/tools v0.13.0/go.mod h1:HvlwmtVNQAhOuCjW7xxvovg8wbNq7LwfXh/k7wXUl58=
 golang.org/x/tools v0.21.1-0.20240508182429-e35e4ccd0d2d/go.mod h1:aiJjzUbINMkxbQROHiO6hDPo2LHcIPhhQsa9DLh0yGk=
 golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
+golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 h1:go1bK/D/BFZV2I8cIQd1NKEZ+0owSTG1fDTci4IqFcE=
+golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 gorm.io/driver/mysql v1.6.0 h1:eNbLmNTpPpTOVZi8MMxCi2aaIm0ZpInbORNXDwyLGvg=
 gorm.io/driver/mysql v1.6.0/go.mod h1:D/oCC2GWK3M/dqoLxnOlaNKmXz8WNTfcS9y5ovaSqKo=
+gorm.io/driver/sqlite v1.6.0 h1:WHRRrIiulaPiPFmDcod6prc4l2VGVWHz80KspNsxSfQ=
+gorm.io/driver/sqlite v1.6.0/go.mod h1:AO9V1qIQddBESngQUKWL9yoH93HIeA1X6V633rBwyT8=
 gorm.io/gorm v1.31.2 h1:3o8FXNo9v9S858gil+3LlZA1LkCOzgb4g5BL64FgaCo=
 gorm.io/gorm v1.31.2/go.mod h1:XyQVbO2k6YkOis7C2437jSit3SsDK72s7n7rsSHd+Gs=

backed/internal/config/config.go

@@ -47,6 +47,10 @@ type JwtConfig struct {
 	Secret         string `toml:"secret"`
 	AccessExpire   int    `toml:"accessExpire"`
 	RefreshExpire  int    `toml:"refreshExpire"`
+	// MfaAccessExpire MFA 通道登录的短期 token 有效期（秒）。MFA 学校第三方会话无法
+	// 自动续期（重新登录需人工输入验证码），token 有效期与第三方 Cookie 对齐；独立于
+	// 普通登录的 accessExpire 便于单独调整（默认 7200 = 2 小时，未配置时自动采用）。
+	MfaAccessExpire int `toml:"mfaAccessExpire"`
 }
 
 type CaptchaConfig struct {
@@ -87,6 +91,10 @@ func Load(path string) error {
 	if v := os.Getenv("JWT_SECRET"); v != "" {
 		Global.Jwt.Secret = v
 	}
+	// MFA 通道短期 token 有效期默认 2 小时（未配置时采用，部署新版本自动生效）
+	if Global.Jwt.MfaAccessExpire <= 0 {
+		Global.Jwt.MfaAccessExpire = 7200
+	}
 	return nil
 }
 

backed/internal/database/mysql.go

@@ -23,7 +23,7 @@ func Init() {
 	}
 
 	// 自动迁移
-	if err := DB.AutoMigrate(&model.SysUser{}, &model.DeviceBindToken{}, &model.CpTask{}, &model.CpTaskLog{}, &model.AgentUser{}, &model.CDKCode{}, &model.SystemConfig{}, &model.Announcement{}, &model.AnnouncementRead{}, &model.Ticket{}, &model.TicketMessage{}, &model.TicketNotification{}, &model.PendingSchool{}); err != nil {
+	if err := DB.AutoMigrate(&model.SysUser{}, &model.DeviceBindToken{}, &model.CpTask{}, &model.CpTaskLog{}, &model.CpLeaveLog{}, &model.AgentUser{}, &model.CDKCode{}, &model.SystemConfig{}, &model.Announcement{}, &model.AnnouncementRead{}, &model.Ticket{}, &model.TicketMessage{}, &model.TicketNotification{}, &model.PendingSchool{}); err != nil {
 		log.Fatalf("自动迁移失败: %v", err)
 	}
 

backed/internal/handler/admin_user.go

@@ -5,6 +5,7 @@ import (
 	"cpdaily-new/internal/model"
 	"cpdaily-new/internal/utils"
 	"log/slog"
+	"sort"
 	"strconv"
 	"strings"
 	"time"
@@ -103,7 +104,8 @@ func ListUsers(c *fiber.Ctx) error {
 		taskCountMap[tc.UserID] = tc.Count
 	}
 
-	// 累计成功执行次数（cp_task_logs is_success=1）
+	// 累计成功执行次数（cp_task_logs 签到/查寝 + cp_leave_logs 请假/销假，含用户已删除的软删除记录）
+	// 说明：用户在客户端"删除"日志只是前台不可见（软删除），后台统计必须计入，否则执行次数会凭空减少
 	executedMap := make(map[uint]int64)
 	// 今天执行状态（success/fail/none）
 	todayStatusMap := make(map[uint]string)
@@ -118,23 +120,46 @@ func ListUsers(c *fiber.Ctx) error {
 			Count     int64
 			MaxStatus int
 		}
+		// 签到/查寝成功次数（Unscoped 包含软删除）
 		var logStats []LogStat
-		database.DB.Model(&model.CpTaskLog{}).
+		database.DB.Unscoped().Model(&model.CpTaskLog{}).
 			Select("user_id, COUNT(*) as count, MAX(is_success) as max_status").
 			Where("user_id IN ? AND is_success = 1", userIDs).
 			Group("user_id").
 			Scan(&logStats)
 		for _, ls := range logStats {
-			executedMap[ls.UserID] = ls.Count
+			executedMap[ls.UserID] += ls.Count
+		}
+		// 请假/销假成功次数（Unscoped 包含软删除）
+		var leaveStats []LogStat
+		database.DB.Unscoped().Model(&model.CpLeaveLog{}).
+			Select("user_id, COUNT(*) as count, MAX(is_success) as max_status").
+			Where("user_id IN ? AND is_success = 1", userIDs).
+			Group("user_id").
+			Scan(&leaveStats)
+		for _, ls := range leaveStats {
+			executedMap[ls.UserID] += ls.Count
 		}
 
-		// 今天 00:00 起的日志
+		// 今天 00:00 起的状态（含软删除）：签到/查寝 + 请假/销假两类日志统一判定
+		// 任一成功 → success；否则任有失败 → fail；都无 → none
 		todayStart := time.Now().Format("2006-01-02") + " 00:00:00"
-		var todayLogs []model.CpTaskLog
-		database.DB.Select("user_id, is_success").
+		var todayTaskLogs []model.CpTaskLog
+		database.DB.Unscoped().Select("user_id, is_success").
 			Where("user_id IN ? AND created_at >= ?", userIDs, todayStart).
-			Find(&todayLogs)
-		for _, tl := range todayLogs {
+			Find(&todayTaskLogs)
+		var todayLeaveLogs []model.CpLeaveLog
+		database.DB.Unscoped().Select("user_id, is_success").
+			Where("user_id IN ? AND created_at >= ?", userIDs, todayStart).
+			Find(&todayLeaveLogs)
+		for _, tl := range todayTaskLogs {
+			if tl.IsSuccess {
+				todayStatusMap[tl.UserID] = "success"
+			} else if todayStatusMap[tl.UserID] != "success" {
+				todayStatusMap[tl.UserID] = "fail"
+			}
+		}
+		for _, tl := range todayLeaveLogs {
 			if tl.IsSuccess {
 				todayStatusMap[tl.UserID] = "success"
 			} else if todayStatusMap[tl.UserID] != "success" {
@@ -215,10 +240,16 @@ func ListUsers(c *fiber.Ctx) error {
 	}
 
 	// 当天统计：执行总次数 / 成功执行总次数 / 新增用户数 / 登录用户数
+	// 执行类统计 = 签到/查寝 + 请假/销假（均含用户已删除的软删除记录）
 	todayStart := time.Now().Format("2006-01-02") + " 00:00:00"
 	var todayExecuteCount, todaySuccessCount int64
-	database.DB.Model(&model.CpTaskLog{}).Where("created_at >= ?", todayStart).Count(&todayExecuteCount)
-	database.DB.Model(&model.CpTaskLog{}).Where("created_at >= ? AND is_success = 1", todayStart).Count(&todaySuccessCount)
+	database.DB.Unscoped().Model(&model.CpTaskLog{}).Where("created_at >= ?", todayStart).Count(&todayExecuteCount)
+	database.DB.Unscoped().Model(&model.CpTaskLog{}).Where("created_at >= ? AND is_success = 1", todayStart).Count(&todaySuccessCount)
+	var todayLeaveExecute, todayLeaveSuccess int64
+	database.DB.Unscoped().Model(&model.CpLeaveLog{}).Where("created_at >= ?", todayStart).Count(&todayLeaveExecute)
+	database.DB.Unscoped().Model(&model.CpLeaveLog{}).Where("created_at >= ? AND is_success = 1", todayStart).Count(&todayLeaveSuccess)
+	todayExecuteCount += todayLeaveExecute
+	todaySuccessCount += todayLeaveSuccess
 	var todayNewUsers, todayLoginUsers int64
 	database.DB.Model(&model.SysUser{}).Where("created_at >= ?", todayStart).Count(&todayNewUsers)
 	database.DB.Model(&model.SysUser{}).Where("last_login_at >= ?", todayStart).Count(&todayLoginUsers)
@@ -229,9 +260,9 @@ func ListUsers(c *fiber.Ctx) error {
 		"page":     page,
 		"pageSize": pageSize,
 		"todayStats": fiber.Map{
-			"executeCount": todayExecuteCount,
-			"successCount": todaySuccessCount,
-			"newUserCount": todayNewUsers,
+			"executeCount":   todayExecuteCount,
+			"successCount":   todaySuccessCount,
+			"newUserCount":   todayNewUsers,
 			"loginUserCount": todayLoginUsers,
 		},
 	})
@@ -274,26 +305,26 @@ func GetUserDetail(c *fiber.Ctx) error {
 	}
 
 	return utils.Success(c, fiber.Map{
-		"id":            user.ID,
-		"username":      user.Username,
-		"schoolId":      user.SchoolID,
-		"schoolName":    user.SchoolName,
-		"studentId":     user.StudentID,
-		"realName":      user.RealName,
-		"password":      password,
-		"signCount":     user.SignCount,
-		"inviteReward":  user.InviteReward,
-		"invitedCount":  user.InvitedCount,
-		"inviterId":     user.InviterID,
-		"inviterName":   inviterName,
-		"status":        user.Status,
+		"id":             user.ID,
+		"username":       user.Username,
+		"schoolId":       user.SchoolID,
+		"schoolName":     user.SchoolName,
+		"studentId":      user.StudentID,
+		"realName":       user.RealName,
+		"password":       password,
+		"signCount":      user.SignCount,
+		"inviteReward":   user.InviteReward,
+		"invitedCount":   user.InvitedCount,
+		"inviterId":      user.InviterID,
+		"inviterName":    inviterName,
+		"status":         user.Status,
 		"disabledReason": user.DisabledReason,
-		"taskCount":     taskCount,
-		"mobileCode":    user.MobileCode,
-		"mobileType":    user.MobileType,
-		"createdAt":     user.CreatedAt.Format("2006-01-02 15:04:05"),
-		"lastLoginAt":   lastLogin,
-		"lastLoginIp":   user.LastLoginIP,
+		"taskCount":      taskCount,
+		"mobileCode":     user.MobileCode,
+		"mobileType":     user.MobileType,
+		"createdAt":      user.CreatedAt.Format("2006-01-02 15:04:05"),
+		"lastLoginAt":    lastLogin,
+		"lastLoginIp":    user.LastLoginIP,
 	})
 }
 
@@ -354,9 +385,35 @@ type AdminTaskLogItem struct {
 	IsSuccess    bool      `json:"isSuccess"`
 	ErrorMessage string    `json:"errorMessage"`
 	CreatedAt    time.Time `json:"createdAt"`
+	// Deleted 表示该记录已被用户在客户端删除（软删除），仅后台可见
+	Deleted bool `json:"deleted"`
+	// Source 数据来源：1=签到/查寝(cp_task_logs) 2=请假/销假(cp_leave_logs)，两表 id 独立自增，前端 key 需组合去重
+	Source int `json:"source"`
 }
 
+// adminLogUnionSQL 后台执行日志明细的数据源：cp_task_logs（签到/查寝）+ cp_leave_logs（请假/销假）UNION。
+// 原始 SQL 绕过 GORM 软删除过滤，故含用户已删除记录（deleted 标注）；source 区分来源（1=任务 2=请假销假）。
+// 占位符顺序：dayStart, dayEnd, dayStart, dayEnd
+// 注意：两表由不同时期建表，字符串列 collation 不一致（utf8mb4_unicode_ci vs general_ci），
+// 直接 UNION 会报 1271 Illegal mix of collations，故显式 COLLATE 统一到 utf8mb4_unicode_ci。
+const adminLogUnionSQL = `
+	SELECT id, user_id, task_type, title, real_title, is_success, error_message, created_at, deleted, source FROM (
+		SELECT id, user_id, task_type, title, real_title, is_success, error_message, created_at,
+		       (deleted_at IS NOT NULL) AS deleted, 1 AS source
+		FROM cp_task_logs
+		WHERE created_at >= ? AND created_at < ?
+		UNION ALL
+		SELECT id, user_id,
+		       (CASE action WHEN 'apply' THEN 'leave_apply' ELSE 'leave_report' END) COLLATE utf8mb4_unicode_ci AS task_type,
+		       title COLLATE utf8mb4_unicode_ci, '' COLLATE utf8mb4_unicode_ci AS real_title, is_success,
+		       error_message COLLATE utf8mb4_unicode_ci, created_at,
+		       (deleted_at IS NOT NULL) AS deleted, 2 AS source
+		FROM cp_leave_logs
+		WHERE created_at >= ? AND created_at < ?
+	) AS combined`
+
 // AdminListTaskLogs 任务执行日志列表（仅admin，供"当天执行总次数"卡片点击查看）
+// 数据源 = 签到/查寝（cp_task_logs）+ 请假/销假（cp_leave_logs），均含用户已删除的软删除记录（标注 deleted）；
 // 支持按日期（默认当天）、执行状态、关键字（用户名/姓名/任务标题）筛选，分页返回
 func AdminListTaskLogs(c *fiber.Ctx) error {
 	// 日期（yyyy-MM-dd，默认当天）
@@ -387,32 +444,90 @@ func AdminListTaskLogs(c *fiber.Ctx) error {
 		pageSize = 20
 	}
 
-	query := database.DB.Table("cp_task_logs").
-		Joins("LEFT JOIN sys_user ON sys_user.id = cp_task_logs.user_id").
-		Where("cp_task_logs.created_at >= ? AND cp_task_logs.created_at < ?", dayStart, dayEnd)
+	type combinedRow struct {
+		ID           uint
+		UserID       uint
+		TaskType     string
+		Title        string
+		RealTitle    string
+		IsSuccess    bool
+		ErrorMessage string
+		CreatedAt    time.Time
+		Deleted      bool
+		Source       int
+	}
+
+	var rows []combinedRow
+	raw := database.DB.Raw(adminLogUnionSQL, dayStart, dayEnd, dayStart, dayEnd)
 	if status == "success" {
-		query = query.Where("cp_task_logs.is_success = 1")
+		raw = database.DB.Raw("SELECT * FROM ("+adminLogUnionSQL+") t WHERE t.is_success = 1", dayStart, dayEnd, dayStart, dayEnd)
 	} else if status == "fail" {
-		query = query.Where("cp_task_logs.is_success = 0")
+		raw = database.DB.Raw("SELECT * FROM ("+adminLogUnionSQL+") t WHERE t.is_success = 0", dayStart, dayEnd, dayStart, dayEnd)
 	}
-	if keyword != "" {
-		like := "%" + keyword + "%"
-		query = query.Where("sys_user.username LIKE ? OR sys_user.real_name LIKE ? OR cp_task_logs.title LIKE ? OR cp_task_logs.real_title LIKE ?",
-			like, like, like, like)
+	raw.Scan(&rows)
+
+	// 用户信息一次性查询
+	userIDs := make([]uint, 0, len(rows))
+	seen := make(map[uint]bool, len(rows))
+	for _, r := range rows {
+		if !seen[r.UserID] {
+			seen[r.UserID] = true
+			userIDs = append(userIDs, r.UserID)
+		}
+	}
+	userMap := make(map[uint]model.SysUser, len(userIDs))
+	if len(userIDs) > 0 {
+		var us []model.SysUser
+		database.DB.Select("id, username, real_name, school_name").Where("id IN ?", userIDs).Find(&us)
+		for _, u := range us {
+			userMap[u.ID] = u
+		}
 	}
 
-	var total int64
-	query.Count(&total)
+	// 关键字过滤（用户名/姓名/标题）在内存中完成（跨表 UNION 后）
+	like := strings.ToLower(keyword)
+	filtered := make([]AdminTaskLogItem, 0, len(rows))
+	for _, r := range rows {
+		u := userMap[r.UserID]
+		if keyword != "" {
+			hay := strings.ToLower(u.Username + u.RealName + r.Title + r.RealTitle)
+			if !strings.Contains(hay, like) {
+				continue
+			}
+		}
+		filtered = append(filtered, AdminTaskLogItem{
+			ID:           r.ID,
+			UserID:       r.UserID,
+			Username:     u.Username,
+			RealName:     u.RealName,
+			SchoolName:   u.SchoolName,
+			TaskType:     r.TaskType,
+			Title:        r.Title,
+			RealTitle:    r.RealTitle,
+			IsSuccess:    r.IsSuccess,
+			ErrorMessage: r.ErrorMessage,
+			CreatedAt:    r.CreatedAt,
+			Deleted:      r.Deleted,
+			Source:       r.Source,
+		})
+	}
+	// 按时间倒序
+	sort.Slice(filtered, func(i, j int) bool {
+		return filtered[i].CreatedAt.After(filtered[j].CreatedAt)
+	})
 
-	var items []AdminTaskLogItem
-	query.Select("cp_task_logs.id, cp_task_logs.user_id, sys_user.username, sys_user.real_name, sys_user.school_name, cp_task_logs.task_type, cp_task_logs.title, cp_task_logs.real_title, cp_task_logs.is_success, cp_task_logs.error_message, cp_task_logs.created_at").
-		Order("cp_task_logs.created_at DESC").
-		Offset((page - 1) * pageSize).
-		Limit(pageSize).
-		Scan(&items)
+	total := int64(len(filtered))
+	start := (page - 1) * pageSize
+	if start > len(filtered) {
+		start = len(filtered)
+	}
+	end := start + pageSize
+	if end > len(filtered) {
+		end = len(filtered)
+	}
 
 	return utils.Success(c, fiber.Map{
-		"items":    items,
+		"items":    filtered[start:end],
 		"total":    total,
 		"page":     page,
 		"pageSize": pageSize,

backed/internal/handler/auth.go

@@ -1,14 +1,20 @@
 package handler
 
 import (
+	"cpdaily-new/internal/config"
 	"cpdaily-new/internal/database"
 	"cpdaily-new/internal/model"
 	"cpdaily-new/internal/service"
 	cpd "cpdaily-new/internal/service/cpdaily"
 	"cpdaily-new/internal/utils"
+	"context"
+	"crypto/rand"
+	"encoding/hex"
+	"encoding/json"
 	"errors"
 	"fmt"
 	"log/slog"
+	"net/http"
 	"strconv"
 	"strings"
 	"time"
@@ -87,7 +93,11 @@ func Login(c *fiber.Ctx) error {
 	}
 
 	// 执行 cpdaily 登录
-	cookies, err := cpd.CpdailyLogin(c.Context(), school, req.Username, req.Password)
+	cookies, mfaCtx, err := cpd.CpdailyLogin(c.Context(), school, req.Username, req.Password)
+	if errors.Is(err, cpd.ErrMFARequired) && mfaCtx != nil {
+		// 多因子认证：验证码已自动发送，暂存会话并返回 mfaToken 给前端（携带邀请码，注册时同样生效）
+		return startMFALogin(c, school, req.Username, req.Password, req.InviteCode, mfaCtx)
+	}
 	if err != nil {
 		slog.Error("cpdaily登录失败", "error", err)
 		return c.Status(401).JSON(utils.Response{
@@ -99,6 +109,107 @@ func Login(c *fiber.Ctx) error {
 		})
 	}
 
+	// 登录成功：公共处理（MOD_ 检查、用户注册、JWT 签发）
+	return finalizeLogin(c, school, req.Username, req.Password, cookies, false, req.InviteCode)
+}
+
+// MFAVerifyRequest 提交多因子认证验证码
+type MFAVerifyRequest struct {
+	MfaToken string `json:"mfaToken"`
+	Code     string `json:"code"`
+}
+
+// MFAVerify 提交多因子认证验证码，完成登录
+// 前端在 /auth/login 返回 needMFA=true 后，引导用户输入今日校园收到的验证码并调用本接口
+func MFAVerify(c *fiber.Ctx) error {
+	var req MFAVerifyRequest
+	if err := c.BodyParser(&req); err != nil || req.MfaToken == "" || req.Code == "" {
+		return utils.FailParam(c, "请求参数错误")
+	}
+	code := strings.TrimSpace(req.Code)
+
+	// 读取暂存的 MFA 会话（成功前不删除，允许验证码输错重试；TTL 到期自动失效）
+	sess, err := loadMFASession(c.Context(), req.MfaToken)
+	if err != nil {
+		// HTTP 200 + 专用业务码 4283：前端关闭验证码弹窗并引导重新登录
+		return utils.RespondWithCode(c, utils.CodeMFAVerifySessionExpired, "验证会话不存在或已过期，请重新登录", nil)
+	}
+
+	school, err := cpd.GetSchoolDetail(sess.SchoolID)
+	if err != nil {
+		slog.Error("MFA验证: 获取学校详情失败", "schoolId", sess.SchoolID, "error", err)
+		return utils.RespondWithCode(c, utils.CodeMFAVerifyFailed, "获取学校信息失败，请稍后重试", nil)
+	}
+
+	// 完成 MFA 认证并走完 CAS 票据交换
+	cookies, err := cpd.CompleteMFALogin(c.Context(), sess.MFA, code)
+	if err != nil {
+		slog.Warn("MFA验证失败", "username", sess.Username, "error", err)
+		if errors.Is(err, cpd.ErrMFASessionExpired) {
+			// 会话失效：前端关闭验证码弹窗，引导重新登录
+			return utils.RespondWithCode(c, utils.CodeMFAVerifySessionExpired, "验证会话已失效，请重新登录", nil)
+		}
+		// 验证码错误或其他失败：弹窗保留，可重新输入（业务码 4282）
+		return utils.RespondWithCode(c, utils.CodeMFAVerifyFailed, "验证失败: "+err.Error(), nil)
+	}
+
+	// 验证成功，清理暂存会话
+	deleteMFASession(c.Context(), req.MfaToken)
+
+	// 短期 JWT：与第三方 Cookie 有效期对齐（MFA 登录无法自动续期）
+	return finalizeLogin(c, school, sess.Username, sess.Password, cookies, true, sess.InviteCode)
+}
+
+// MFASendCodeRequest 发送多因子认证验证码（用户已选定验证方式）
+type MFASendCodeRequest struct {
+	MfaToken   string `json:"mfaToken"`
+	ReAuthType string `json:"reAuthType"` // 用户选择的验证方式（reAuthType 编码：3=短信 5=今日校园 11=邮箱 等）
+}
+
+// MFASendCode 按用户选定的验证方式发送验证码
+// 前端在 /auth/login 返回 4281（含 authMethods 列表）后，用户选择方式点击「发送验证码」时调用本接口：
+//   - 成功（code 0）：前端进入验证码输入阶段（data 含 mobile/codeTime）
+//   - 4284：发送失败（弹窗留在选择界面，可重试或更换方式）
+//   - 4283：验证会话已过期（关闭弹窗引导重新登录）
+func MFASendCode(c *fiber.Ctx) error {
+	var req MFASendCodeRequest
+	if err := c.BodyParser(&req); err != nil || req.MfaToken == "" {
+		return utils.FailParam(c, "请求参数错误")
+	}
+
+	sess, err := loadMFASession(c.Context(), req.MfaToken)
+	if err != nil {
+		return utils.RespondWithCode(c, utils.CodeMFAVerifySessionExpired, "验证会话不存在或已过期，请重新登录", nil)
+	}
+
+	result, err := cpd.SendMFADynamicCode(c.Context(), sess.MFA, req.ReAuthType)
+	if err != nil {
+		slog.Warn("MFA发送验证码失败", "username", sess.Username, "reAuthType", req.ReAuthType, "error", err)
+		if errors.Is(err, cpd.ErrMFASessionExpired) {
+			return utils.RespondWithCode(c, utils.CodeMFAVerifySessionExpired, "验证会话已失效，请重新登录", nil)
+		}
+		return utils.RespondWithCode(c, utils.CodeMFASendCodeFailed, "发送失败: "+err.Error(), nil)
+	}
+
+	// 用户选择的验证方式已同步到会话（提交 reAuthSubmit.do 需使用同一方式），更新暂存
+	if err := updateMFASession(c.Context(), req.MfaToken, sess); err != nil {
+		slog.Warn("MFA会话更新失败", "error", err)
+	}
+
+	msg := result.Message
+	if result.Mobile != "" && !strings.Contains(msg, result.Mobile) {
+		msg = fmt.Sprintf("%s，验证码已发送至 %s", msg, result.Mobile)
+	}
+	slog.Info("MFA验证码已发送", "username", sess.Username, "reAuthType", req.ReAuthType)
+	return utils.RespondWithCode(c, 0, msg, fiber.Map{
+		"mobile":   result.Mobile,
+		"codeTime": result.CodeTime,
+	})
+}
+
+// finalizeLogin 登录成功后的公共处理：MOD_ 检查、Cookie 序列化、查找/注册用户、
+// 更新登录信息、签发 JWT。shortToken=true 时签发 MFA 短期 token。
+func finalizeLogin(c *fiber.Ctx, school *cpd.SchoolDetailInfo, username, password string, cookies []*http.Cookie, shortToken bool, referralCode string) error {
 	// 检查 MOD_ cookie
 	hasMOD := false
 	for _, cookie := range cookies {
@@ -121,10 +232,10 @@ func Login(c *fiber.Ctx) error {
 	cookieStr := cpd.SerializeCookies(cookies)
 
 	// 构建用户名: 学校简称 + 学号
-	userName := buildUsername(school, req.Username)
+	userName := buildUsername(school, username)
 
 	// 查找或创建用户
-	user, isNew, err := findOrCreateUser(userName, req.Password, req.SchoolID, school.Name, req.Username, cookieStr, req.InviteCode)
+	user, isNew, err := findOrCreateUser(userName, password, school.ID, school.Name, username, cookieStr, referralCode)
 	if err != nil {
 		slog.Error("用户处理失败", "error", err)
 		return utils.FailServer(c, "用户处理失败")
@@ -152,15 +263,20 @@ func Login(c *fiber.Ctx) error {
 	})
 
 	// 保存明文密码（用于 cookie 过期时自动重新登录）
-	if err := saveRawPassword(user.ID, req.Password); err != nil {
+	if err := saveRawPassword(user.ID, password); err != nil {
 		slog.Error("保存密码失败", "userId", user.ID, "error", err)
 	}
 
 	// 尝试从 cpdaily 获取用户主页信息并更新本地数据
 	go syncUserProfile(user, cookieStr, school.WecloudUrl)
 
-	// 生成 JWT
-	tokenPair, err := service.GenerateTokens(user.ID, user.Username, user.SchoolID)
+	// 生成 JWT：MFA 通道登录使用与第三方 Cookie 对齐的短期 token
+	var tokenPair *service.TokenPair
+	if shortToken {
+		tokenPair, err = service.GenerateShortTokens(user.ID, user.Username, user.SchoolID, int64(config.Global.Jwt.MfaAccessExpire))
+	} else {
+		tokenPair, err = service.GenerateTokens(user.ID, user.Username, user.SchoolID)
+	}
 	if err != nil {
 		return utils.FailServer(c, "生成token失败")
 	}
@@ -565,3 +681,114 @@ func generateRandomCode(n int) string {
 	}
 	return string(code)
 }
+
+// ========== 多因子认证（MFA）会话暂存 ==========
+
+const (
+	mfaSessionKeyFmt = "mfa_session:%s"
+	mfaSessionTTL    = 10 * time.Minute
+)
+
+// mfaSession Redis 暂存的 MFA 中间会话（Password AES 加密存储）
+type mfaSession struct {
+	SchoolID   string          `json:"schoolId"`
+	Username   string          `json:"username"`
+	Password   string          `json:"password"`
+	InviteCode string          `json:"inviteCode,omitempty"` // 注册时携带的邀请码（MFA 通道注册同样生效）
+	MFA        *cpd.MFAContext `json:"mfa"`
+}
+
+// startMFALogin 暂存 MFA 会话并返回 mfaToken 与可用验证方式列表，
+// 前端引导用户选择验证方式后调用 /auth/login/mfa/send 获取验证码
+func startMFALogin(c *fiber.Ctx, school *cpd.SchoolDetailInfo, username, password, inviteCode string, mfaCtx *cpd.MFAContext) error {
+	if service.Redis == nil {
+		return utils.FailServer(c, "多因子认证暂不可用（存储服务未就绪），请稍后重试")
+	}
+
+	tokenBytes := make([]byte, 32)
+	if _, err := rand.Read(tokenBytes); err != nil {
+		return utils.FailServer(c, "生成验证会话失败")
+	}
+	mfaToken := hex.EncodeToString(tokenBytes)
+
+	// 密码 AES 加密后暂存，验证成功后用于注册/更新账号
+	encPassword, err := encryptRawPassword(password)
+	if err != nil {
+		return utils.FailServer(c, "生成验证会话失败")
+	}
+
+	data, _ := json.Marshal(mfaSession{
+		SchoolID:   school.ID,
+		Username:   username,
+		Password:   encPassword,
+		InviteCode: inviteCode,
+		MFA:        mfaCtx,
+	})
+	if err := service.Redis.Set(context.Background(), fmt.Sprintf(mfaSessionKeyFmt, mfaToken), data, mfaSessionTTL).Err(); err != nil {
+		slog.Error("MFA会话暂存失败", "error", err)
+		return utils.FailServer(c, "生成验证会话失败")
+	}
+
+	slog.Info("MFA会话已创建", "school", school.Name, "username", username,
+		"defaultType", mfaCtx.ReAuthType, "authMethods", len(mfaCtx.AuthMethods))
+	// HTTP 200 + 专用业务码 4281：前端按 code 弹出「选择验证方式」弹窗（而非登录失败弹窗）
+	return utils.RespondWithCode(c, utils.CodeMFARequired, "该校登录需多因子认证，请选择验证方式获取验证码", fiber.Map{
+		"needMFA":     true,
+		"mfaToken":    mfaToken,
+		"expiresIn":   int(mfaSessionTTL.Seconds()),
+		"authMethods": mfaCtx.AuthMethods,
+		"defaultType": mfaCtx.ReAuthType,
+	})
+}
+
+// loadMFASession 读取暂存的 MFA 会话（验证码输错可重试，成功后才删除）
+func loadMFASession(ctx context.Context, mfaToken string) (*mfaSession, error) {
+	if service.Redis == nil || mfaToken == "" {
+		return nil, fmt.Errorf("mfa session unavailable")
+	}
+	val, err := service.Redis.Get(ctx, fmt.Sprintf(mfaSessionKeyFmt, mfaToken)).Result()
+	if err != nil {
+		return nil, err
+	}
+	var sess mfaSession
+	if err := json.Unmarshal([]byte(val), &sess); err != nil {
+		return nil, err
+	}
+	// 解密密码
+	raw, err := decryptRawPassword(sess.Password)
+	if err != nil {
+		return nil, err
+	}
+	sess.Password = raw
+	return &sess, nil
+}
+
+// deleteMFASession 删除暂存的 MFA 会话
+func deleteMFASession(ctx context.Context, mfaToken string) {
+	if service.Redis == nil || mfaToken == "" {
+		return
+	}
+	service.Redis.Del(ctx, fmt.Sprintf(mfaSessionKeyFmt, mfaToken))
+}
+
+// updateMFASession 更新暂存的 MFA 会话（如用户切换验证方式后），TTL 顺延
+func updateMFASession(ctx context.Context, mfaToken string, sess *mfaSession) error {
+	if service.Redis == nil || mfaToken == "" || sess == nil {
+		return fmt.Errorf("mfa session unavailable")
+	}
+	encPassword, err := encryptRawPassword(sess.Password)
+	if err != nil {
+		return err
+	}
+	data, err := json.Marshal(mfaSession{
+		SchoolID:   sess.SchoolID,
+		Username:   sess.Username,
+		Password:   encPassword,
+		InviteCode: sess.InviteCode,
+		MFA:        sess.MFA,
+	})
+	if err != nil {
+		return err
+	}
+	return service.Redis.Set(ctx, fmt.Sprintf(mfaSessionKeyFmt, mfaToken), data, mfaSessionTTL).Err()
+}

backed/internal/handler/auth_helper.go

@@ -88,8 +88,8 @@ func refreshCpdailyCookie(user *model.SysUser) error {
 	slog.Info("刷新cookie: 尝试重新登录cpdaily", "userId", user.ID, "school", school.Name)
 
 	// 执行 cpdaily 登录
-	cookies, err := cpd.CpdailyLogin(context.Background(), school, fresh.StudentID, rawPassword)
-	if err != nil {
+	cookies, mfaCtx, err := cpd.CpdailyLogin(context.Background(), school, fresh.StudentID, rawPassword)
+	if err != nil && !errors.Is(err, cpd.ErrMFARequired) {
 		errMsg := err.Error()
 		slog.Warn("刷新cookie: cpdaily登录失败", "userId", user.ID, "error", errMsg)
 
@@ -102,6 +102,11 @@ func refreshCpdailyCookie(user *model.SysUser) error {
 		}
 		return err
 	}
+	// 多因子认证学校：重新登录需人工输入验证码，无法自动续期
+	if errors.Is(err, cpd.ErrMFARequired) || mfaCtx != nil {
+		slog.Warn("刷新cookie: 该账号登录需多因子认证，无法自动续期", "userId", user.ID, "school", school.Name)
+		return errors.New("该账号所属学校开启登录验证码校验，需重新登录完成验证")
+	}
 
 	// 检查 MOD_ cookie 确保登录成功
 	hasMOD := false

backed/internal/handler/leave.go

@@ -0,0 +1,407 @@
+package handler
+
+import (
+	"bufio"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"log/slog"
+	"strings"
+	"time"
+
+	"cpdaily-new/internal/database"
+	"cpdaily-new/internal/model"
+	"cpdaily-new/internal/ratelimit"
+	cpd "cpdaily-new/internal/service/cpdaily"
+	"cpdaily-new/internal/utils"
+
+	"github.com/gofiber/fiber/v2"
+	"gorm.io/gorm"
+)
+
+// ---------- 销假（请假销假）----------
+
+// GetPendingLeaves 获取今日校园待销假列表（实时请求今日校园，附带规定销假位置）
+func GetPendingLeaves(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+
+	var user model.SysUser
+	if err := database.DB.First(&user, userID).Error; err != nil {
+		return utils.FailAuth(c, "用户不存在")
+	}
+	if user.Cookie == "" {
+		return utils.Fail(c, 400, "请先登录")
+	}
+
+	cookieMap := cpd.ParseCookieJSON(user.Cookie)
+	host := getSchoolHost(user.SchoolID)
+
+	// 应用套件分流：新套（leave-new）走独立链路
+	if schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+		items, err := fetchLeaveNewPendingList(cookieMap, host, &user)
+		if err != nil {
+			slog.Error("获取待销假列表失败(新套)", "userId", userID, "error", err)
+			if isCookieExpired(err) {
+				return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+			}
+			return utils.Fail(c, 503, "获取待销假列表失败: "+err.Error())
+		}
+		return utils.Success(c, items)
+	}
+
+	items, err := cpd.FetchLeaveList(cookieMap, host)
+	if err != nil && isCookieExpired(err) {
+		slog.Info("获取待销假列表cookie过期，尝试刷新", "userId", userID)
+		if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			items, err = cpd.FetchLeaveList(cookieMap, host)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			err = ErrPasswordChanged
+		}
+	}
+	if err != nil {
+		slog.Error("获取待销假列表失败", "userId", userID, "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取待销假列表失败: "+err.Error())
+	}
+
+	return utils.Success(c, items)
+}
+
+// ExecuteLeaveRequest 销假执行参数
+type ExecuteLeaveRequest struct {
+	LeaveID     string `json:"leaveId"`     // 今日校园请假记录 ID
+	Longitude   string `json:"longitude"`   // 销假经度（必填）
+	Latitude    string `json:"latitude"`    // 销假纬度（必填）
+	Address     string `json:"address"`     // 销假地址（无规定位置时必填）
+	ImageURL    string `json:"imageUrl"`    // 销假图片 URL（可选）
+	ApproverWid string `json:"approverWid"` // 审批人 userWid（reportApplyFlow=1 时为必填）
+}
+
+// ExecuteLeave 执行销假（SSE 同步执行：POST 请求 + 流式事件返回进度与结果）。
+// 事件流：connecting → fetching_detail → submitting → success / task_error
+func ExecuteLeave(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+
+	var req ExecuteLeaveRequest
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+	req.LeaveID = strings.TrimSpace(req.LeaveID)
+	req.Longitude = strings.TrimSpace(req.Longitude)
+	req.Latitude = strings.TrimSpace(req.Latitude)
+	req.Address = strings.TrimSpace(req.Address)
+	req.ApproverWid = strings.TrimSpace(req.ApproverWid)
+	if req.LeaveID == "" || req.Longitude == "" || req.Latitude == "" {
+		return utils.FailParam(c, "销假经纬度不能为空")
+	}
+
+	var user model.SysUser
+	if err := database.DB.First(&user, userID).Error; err != nil {
+		return utils.FailAuth(c, "用户不存在")
+	}
+	if user.Cookie == "" {
+		return utils.Fail(c, 400, "请先登录")
+	}
+
+	// SSE 头
+	c.Set("Content-Type", "text/event-stream")
+	c.Set("Cache-Control", "no-cache")
+	c.Set("Connection", "keep-alive")
+	c.Set("X-Accel-Buffering", "no")
+
+	// SSE 写入器：所有检查在流内进行，通过 SSE event 返回结果
+	c.Context().SetBodyStreamWriter(func(w *bufio.Writer) {
+		sendEvent := func(event string, data map[string]interface{}) {
+			d, _ := json.Marshal(data)
+			fmt.Fprintf(w, "event: %s\ndata: %s\n\n", event, string(d))
+			w.Flush()
+		}
+
+		// 保存销假日志
+		saveLog := func(isSuccess bool, errMsg, title string) {
+			logEntry := model.CpLeaveLog{
+				UserID:       userID,
+				LeaveID:      req.LeaveID,
+				Title:        title,
+				SchoolName:   user.SchoolName,
+				Action:       model.LeaveActionReport,
+				IsSuccess:    isSuccess,
+				ErrorMessage: errMsg,
+			}
+			database.DB.Create(&logEntry)
+		}
+
+		// VIP 判定：VIP 且未过期则免扣次数直接执行
+		isVip := user.VipExpireAt != nil && user.VipExpireAt.After(time.Now())
+
+		// 检查可用次数（VIP 免检查）
+		if !isVip && user.SignCount <= 0 {
+			slog.Warn("销假次数不足，拒绝执行", "userId", userID)
+			sendEvent("task_error", map[string]interface{}{"message": "可用次数不足，请购买CDK或通过邀请获得次数"})
+			return
+		}
+
+		// 限流：同一用户（销假为同步执行，无任务维度，按用户维度限流）
+		rateKey := fmt.Sprintf("leave:%d", userID)
+		rules := []ratelimit.Rule{
+			{Limit: 3, Window: 2 * time.Minute, Label: "2m"},
+			{Limit: 6, Window: 1 * time.Hour, Label: "1h"},
+			{Limit: 10, Window: 24 * time.Hour, Label: "1d"},
+		}
+		if ok, msg := ratelimit.AllowMulti(rateKey, rules); !ok {
+			slog.Warn("销假触发限流", "userId", userID, "msg", msg)
+			sendEvent("task_error", map[string]interface{}{"message": msg, "rateLimit": true})
+			return
+		}
+
+		// 1. 连接成功
+		sendEvent("connecting", map[string]interface{}{"status": "connecting", "message": "正在连接今日校园..."})
+
+		cookieMap := cpd.ParseCookieJSON(user.Cookie)
+		host := getSchoolHost(user.SchoolID)
+
+		// 新套（leave-new）：独立销假链路（详情校验 → 销假提交）
+		if schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+			sendEvent("fetching_detail", map[string]interface{}{"status": "fetching_detail", "message": "正在获取请假详情..."})
+			title := "销假"
+			if d, derr := cpd.FetchLeaveNewDetail(cookieMap, host, req.LeaveID); derr == nil {
+				title = leaveLogTitle(&cpd.LeaveDetail{LeaveType: d.TopicName}, req.LeaveID)
+			}
+			sendEvent("submitting", map[string]interface{}{"status": "submitting", "message": "正在提交销假..."})
+			ok, errMsg, needReLogin := leaveNewExecuteReport(&user, cookieMap, host,
+				req.LeaveID, req.Address, req.Longitude, req.Latitude, req.ImageURL, req.ApproverWid)
+			if !ok {
+				slog.Error("销假失败(新套)", "userId", userID, "leaveId", req.LeaveID, "error", errMsg)
+				saveLog(false, errMsg, title)
+				sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needReLogin": needReLogin})
+				return
+			}
+			saveLog(true, "", title)
+			if !isVip {
+				database.DB.Model(&model.SysUser{}).Where("id = ? AND sign_count > 0", userID).
+					Update("sign_count", gorm.Expr("sign_count - 1"))
+				sendEvent("success", map[string]interface{}{"status": "success", "message": "销假成功！"})
+			} else {
+				sendEvent("success", map[string]interface{}{"status": "success", "message": "销假成功！（VIP 免扣次数）"})
+			}
+			slog.Info("销假成功(新套)", "userId", userID, "leaveId", req.LeaveID, "title", title, "isVip", isVip)
+			return
+		}
+
+		// 2. 获取请假详情
+		sendEvent("fetching_detail", map[string]interface{}{"status": "fetching_detail", "message": "正在获取请假详情..."})
+		detail, err := cpd.FetchLeaveDetail(cookieMap, host, req.LeaveID)
+		if err != nil && isCookieExpired(err) {
+			slog.Info("获取请假详情cookie过期，尝试自动刷新", "userId", userID, "leaveId", req.LeaveID)
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				detail, err = cpd.FetchLeaveDetail(cookieMap, host, req.LeaveID)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			errMsg := "获取请假详情失败: " + err.Error()
+			if errors.Is(err, ErrPasswordChanged) {
+				errMsg = "登录凭证已过期，请重新登录"
+			}
+			slog.Error("获取请假详情失败", "userId", userID, "leaveId", req.LeaveID, "error", err)
+			saveLog(false, errMsg, leaveLogTitle(detail, ""))
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needReLogin": errors.Is(err, ErrPasswordChanged)})
+			return
+		}
+		title := leaveLogTitle(detail, req.LeaveID)
+
+		// 销假地址：用户选择/填写的优先，否则兜底第一个规定销假位置地址；两者皆空时阻止提交
+		if req.Address == "" && len(detail.ReportPlaces) == 0 {
+			errMsg := "该请假未设置规定销假位置，请填写销假地址"
+			saveLog(false, errMsg, title)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+			return
+		}
+
+		// 审批人：请假类型要求销假审批（reportApplyFlow=1）时必须选择审批人
+		if detail.ReportApplyFlow && req.ApproverWid == "" {
+			errMsg := "该请假类型销假需要选择审批人，请重新选择"
+			saveLog(false, errMsg, title)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needApprover": true})
+			return
+		}
+
+		// 3. 构造表单并提交销假
+		sendEvent("submitting", map[string]interface{}{"status": "submitting", "message": "正在提交销假..."})
+		form := cpd.BuildLeaveReportForm(detail, req.Address, req.ImageURL, req.ApproverWid)
+		err = cpd.SubmitLeaveReport(cookieMap, host, form, req.Longitude, req.Latitude, user.MobileCode, user.StudentID)
+		if err != nil && isCookieExpired(err) {
+			slog.Info("提交销假cookie过期，尝试自动刷新", "userId", userID, "leaveId", req.LeaveID)
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				err = cpd.SubmitLeaveReport(cookieMap, host, form, req.Longitude, req.Latitude, user.MobileCode, user.StudentID)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			errMsg := "销假失败: " + err.Error()
+			if errors.Is(err, ErrPasswordChanged) {
+				errMsg = "登录凭证已过期，请重新登录"
+			}
+			slog.Error("销假失败", "userId", userID, "leaveId", req.LeaveID, "error", err)
+			saveLog(false, errMsg, title)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needReLogin": errors.Is(err, ErrPasswordChanged)})
+			return
+		}
+
+		// 4. 成功：写日志 + 扣减可用次数（VIP 有效期内免扣）
+		saveLog(true, "", title)
+		if !isVip {
+			database.DB.Model(&model.SysUser{}).Where("id = ? AND sign_count > 0", userID).
+				Update("sign_count", gorm.Expr("sign_count - 1"))
+			sendEvent("success", map[string]interface{}{
+				"status":  "success",
+				"message": "销假成功！",
+			})
+		} else {
+			sendEvent("success", map[string]interface{}{
+				"status":  "success",
+				"message": "销假成功！（VIP 免扣次数）",
+			})
+		}
+
+		slog.Info("销假成功", "userId", userID, "leaveId", req.LeaveID, "title", title, "isVip", isVip)
+	})
+
+	return nil
+}
+
+// GetLeaveApprovers 获取销假可选审批人（leaveType.reportApplyFlow=1 的请假类型）。
+// 请求：{ leaveId }；服务端自行取详情中的 leaveType/起止时间，前端无需重复传递。
+func GetLeaveApprovers(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+
+	var req struct {
+		LeaveID string `json:"leaveId"`
+	}
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+	req.LeaveID = strings.TrimSpace(req.LeaveID)
+	if req.LeaveID == "" {
+		return utils.FailParam(c, "leaveId 不能为空")
+	}
+
+	var user model.SysUser
+	if err := database.DB.First(&user, userID).Error; err != nil {
+		return utils.FailAuth(c, "用户不存在")
+	}
+	if user.Cookie == "" {
+		return utils.Fail(c, 400, "请先登录")
+	}
+
+	cookieMap := cpd.ParseCookieJSON(user.Cookie)
+	host := getSchoolHost(user.SchoolID)
+
+	// 新套：销假确认人（getReportApprovers by leaveId）
+	if schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+		approvers, err := fetchLeaveNewReportApprovers(cookieMap, host, req.LeaveID, &user)
+		if err != nil && isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				approvers, err = fetchLeaveNewReportApprovers(cookieMap, host, req.LeaveID, &user)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			slog.Error("获取销假审批人失败(新套)", "userId", userID, "leaveId", req.LeaveID, "error", err)
+			if errors.Is(err, ErrPasswordChanged) {
+				return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+			}
+			return utils.Fail(c, 503, "获取销假审批人失败: "+err.Error())
+		}
+		return utils.Success(c, approvers)
+	}
+
+	detail, err := cpd.FetchLeaveDetail(cookieMap, host, req.LeaveID)
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			detail, err = cpd.FetchLeaveDetail(cookieMap, host, req.LeaveID)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			err = ErrPasswordChanged
+		}
+	}
+	if err != nil {
+		slog.Error("获取请假详情失败(审批人)", "userId", userID, "leaveId", req.LeaveID, "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取请假详情失败: "+err.Error())
+	}
+	if !detail.ReportApplyFlow {
+		return utils.Success(c, []cpd.LeaveApprover{})
+	}
+
+	approvers, err := cpd.FetchReportApprovers(cookieMap, host, detail.LeaveCodeNum, detail.StartTime, detail.EndTime)
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			approvers, err = cpd.FetchReportApprovers(cookieMap, host, detail.LeaveCodeNum, detail.StartTime, detail.EndTime)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			err = ErrPasswordChanged
+		}
+	}
+	if err != nil {
+		slog.Error("获取销假审批人失败", "userId", userID, "leaveId", req.LeaveID, "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取销假审批人失败: "+err.Error())
+	}
+
+	return utils.Success(c, approvers)
+}
+
+// leaveLogTitle 销假日志标题：请假类型名 + "销假"；类型名缺失时兜底用 leaveId 前缀避免标题为空
+func leaveLogTitle(detail *cpd.LeaveDetail, leaveID string) string {
+	if detail != nil && detail.LeaveType != "" {
+		return detail.LeaveType + "销假"
+	}
+	if leaveID != "" {
+		return "销假(" + leaveID + ")"
+	}
+	return "销假"
+}
+
+// ListLeaveLogs 获取销假日志列表
+func ListLeaveLogs(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+
+	var logs []model.CpLeaveLog
+	database.DB.Where("user_id = ?", userID).
+		Order("created_at DESC").
+		Limit(10).
+		Find(&logs)
+
+	return utils.Success(c, logs)
+}
+
+// DeleteLeaveLog 删除销假日志
+func DeleteLeaveLog(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+	id := c.Params("id")
+
+	var log model.CpLeaveLog
+	if err := database.DB.Where("id = ? AND user_id = ?", id, userID).First(&log).Error; err != nil {
+		if errors.Is(err, gorm.ErrRecordNotFound) {
+			return utils.Fail(c, 404, "日志不存在")
+		}
+		return utils.FailServer(c, "查询失败")
+	}
+
+	database.DB.Delete(&log)
+	return utils.Success(c, nil)
+}

backed/internal/handler/leave_apply.go

@@ -0,0 +1,471 @@
+package handler
+
+import (
+	"bufio"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"log/slog"
+	"strconv"
+	"strings"
+	"time"
+
+	"cpdaily-new/internal/database"
+	"cpdaily-new/internal/model"
+	"cpdaily-new/internal/ratelimit"
+	cpd "cpdaily-new/internal/service/cpdaily"
+	"cpdaily-new/internal/utils"
+
+	"github.com/gofiber/fiber/v2"
+	"gorm.io/gorm"
+)
+
+// ---------- 请假申请 ----------
+
+// loadLeaveUser 读取当前用户（请假链路公共前置）
+func loadLeaveUser(c *fiber.Ctx) (*model.SysUser, error) {
+	userID := c.Locals("userId").(uint)
+	var user model.SysUser
+	if err := database.DB.First(&user, userID).Error; err != nil {
+		return nil, fmt.Errorf("用户不存在")
+	}
+	if user.Cookie == "" {
+		return nil, fmt.Errorf("请先登录")
+	}
+	return &user, nil
+}
+
+// GetLeaveTypes 获取请假类型列表（含全部权威开关，前端据此渲染表单）。
+// 按学校应用的套件分流：新套（leave-new）翻译为同一契约返回。
+func GetLeaveTypes(c *fiber.Ctx) error {
+	user, err := loadLeaveUser(c)
+	if err != nil {
+		return utils.FailAuth(c, err.Error())
+	}
+
+	cookieMap := cpd.ParseCookieJSON(user.Cookie)
+	host := getSchoolHost(user.SchoolID)
+
+	flavor := schoolLeaveFlavor(user, cookieMap)
+
+	var types []cpd.LeaveType
+	if flavor == cpd.LeaveFlavorNew {
+		types, err = fetchLeaveNewTypesWithDetail(cookieMap, host, user)
+	} else {
+		types, err = cpd.FetchLeaveTypes(cookieMap, host)
+	}
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			if flavor == cpd.LeaveFlavorNew {
+				types, err = fetchLeaveNewTypesWithDetail(cookieMap, host, user)
+			} else {
+				types, err = cpd.FetchLeaveTypes(cookieMap, host)
+			}
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			err = ErrPasswordChanged
+		}
+	}
+	if err != nil {
+		slog.Error("获取请假类型失败", "userId", user.ID, "flavor", flavor.String(), "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取请假类型失败: "+err.Error())
+	}
+
+	return utils.Success(c, types)
+}
+
+// GetLeaveApplyApprovers 获取请假可选审批人（needApproval=1 的类型）。
+// 请求：{ leaveType, startTime, endTime }（与销假审批人接口区分：此处选择类型发生在提交前）。
+// 新套额外返回 flowData（提交请假时原样回传），前端不透明缓存即可。
+func GetLeaveApplyApprovers(c *fiber.Ctx) error {
+	user, err := loadLeaveUser(c)
+	if err != nil {
+		return utils.FailAuth(c, err.Error())
+	}
+
+	var req struct {
+		LeaveType int    `json:"leaveType"`
+		StartTime string `json:"startTime"`
+		EndTime   string `json:"endTime"`
+	}
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+	if req.StartTime == "" || req.EndTime == "" {
+		return utils.FailParam(c, "开始/结束时间不能为空")
+	}
+
+	cookieMap := cpd.ParseCookieJSON(user.Cookie)
+	host := getSchoolHost(user.SchoolID)
+
+	flavor := schoolLeaveFlavor(user, cookieMap)
+
+	if flavor == cpd.LeaveFlavorNew {
+		res, err := fetchLeaveNewApplyApprovers(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime)
+		if err != nil && isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				res, err = fetchLeaveNewApplyApprovers(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			slog.Error("获取请假审批人失败(新套)", "userId", user.ID, "leaveType", req.LeaveType, "error", err)
+			if errors.Is(err, ErrPasswordChanged) {
+				return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+			}
+			return utils.Fail(c, 503, "获取请假审批人失败: "+err.Error())
+		}
+		// 保持与旧套一致的数组契约（flowData 由服务端在执行时重新获取，前端无需感知）
+		return utils.Success(c, res.Approvers)
+	}
+
+	approvers, err := cpd.FetchReportApprovers(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime)
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			approvers, err = cpd.FetchReportApprovers(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			err = ErrPasswordChanged
+		}
+	}
+	if err != nil {
+		slog.Error("获取请假审批人失败", "userId", user.ID, "leaveType", req.LeaveType, "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取请假审批人失败: "+err.Error())
+	}
+
+	return utils.Success(c, approvers)
+}
+
+// ExecuteLeaveApplyRequest 请假申请执行参数
+type ExecuteLeaveApplyRequest struct {
+	LeaveType     int                 `json:"leaveType"`     // 类型编码
+	StartTime     string              `json:"startTime"`     // yyyy-MM-dd HH:mm:ss
+	EndTime       string              `json:"endTime"`       // yyyy-MM-dd HH:mm:ss
+	LeaveReason   string              `json:"leaveReason"`   // 请假原因
+	OutStatus     bool                `json:"outStatus"`     // 是否离校
+	UrgencyMobile string              `json:"urgencyMobile"` // 紧急联系人（离校必填）
+	Address       string              `json:"address"`       // 目的地（离校必填）
+	DetailAddress string              `json:"detailAddress"` // 详细地址（离校必填）
+	Longitude     string              `json:"longitude"`     // 定位经度
+	Latitude      string              `json:"latitude"`      // 定位纬度
+	LocationAddr  string              `json:"locationAddr"`  // 定位地址
+	ImageURLs     []string            `json:"imageUrls"`     // 附件图片 URL 列表（可选，最多4张且不超学校上限）
+	ImageURL      string              `json:"imageUrl"`      // 兼容旧前端：单附件 URL（与 imageUrls 合并去重）
+	ApproverWid   string              `json:"approverWid"`   // 审批人 userWid（候选为空时可不传）
+	ApproverId    string              `json:"approverId"`    // 审批人 userId
+	ApproverName  string              `json:"approverName"`  // 审批人姓名
+	CcUsers       []cpd.LeaveApprover `json:"ccUsers"`       // 抄送人（非必填，候选取自审批人列表）
+}
+
+// mergeApplyImageURLs 合并 imageUrls 与兼容字段 imageUrl，保序去重并剔除空串
+func mergeApplyImageURLs(urls []string, legacy string) []string {
+	out := make([]string, 0, len(urls)+1)
+	seen := make(map[string]bool, len(urls)+1)
+	for _, u := range append(append([]string{}, urls...), legacy) {
+		u = strings.TrimSpace(u)
+		if u == "" || seen[u] {
+			continue
+		}
+		seen[u] = true
+		out = append(out, u)
+	}
+	return out
+}
+
+// ExecuteLeaveApply 执行请假申请（SSE 同步执行：checkOnceLeave → 提交）。
+// 事件流：connecting → submitting → success / task_error
+func ExecuteLeaveApply(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+
+	var req ExecuteLeaveApplyRequest
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+	req.StartTime = strings.TrimSpace(req.StartTime)
+	req.EndTime = strings.TrimSpace(req.EndTime)
+	req.LeaveReason = strings.TrimSpace(req.LeaveReason)
+	req.Longitude = strings.TrimSpace(req.Longitude)
+	req.Latitude = strings.TrimSpace(req.Latitude)
+	req.LocationAddr = strings.TrimSpace(req.LocationAddr)
+	req.ApproverWid = strings.TrimSpace(req.ApproverWid)
+	// 附件：多图字段 + 旧前端兼容单图字段，去重合并
+	imageURLs := mergeApplyImageURLs(req.ImageURLs, req.ImageURL)
+	if len(imageURLs) > cpd.LeaveMaxAttachCount(0) {
+		return utils.FailParam(c, "附件最多 4 张")
+	}
+
+	if req.StartTime == "" || req.EndTime == "" {
+		return utils.FailParam(c, "开始/结束时间不能为空")
+	}
+	if req.LeaveReason == "" {
+		return utils.FailParam(c, "请假原因不能为空")
+	}
+	if req.Longitude == "" || req.Latitude == "" {
+		return utils.FailParam(c, "定位经纬度不能为空")
+	}
+	if req.LocationAddr == "" {
+		return utils.FailParam(c, "定位地址不能为空")
+	}
+	if req.OutStatus {
+		if strings.TrimSpace(req.UrgencyMobile) == "" {
+			return utils.FailParam(c, "紧急联系人手机号不能为空")
+		}
+		if strings.TrimSpace(req.Address) == "" {
+			return utils.FailParam(c, "目的地不能为空")
+		}
+		if strings.TrimSpace(req.DetailAddress) == "" {
+			return utils.FailParam(c, "详细地址不能为空")
+		}
+	}
+
+	var user model.SysUser
+	if err := database.DB.First(&user, userID).Error; err != nil {
+		return utils.FailAuth(c, "用户不存在")
+	}
+	if user.Cookie == "" {
+		return utils.Fail(c, 400, "请先登录")
+	}
+
+	// SSE 头
+	c.Set("Content-Type", "text/event-stream")
+	c.Set("Cache-Control", "no-cache")
+	c.Set("Connection", "keep-alive")
+	c.Set("X-Accel-Buffering", "no")
+
+	c.Context().SetBodyStreamWriter(func(w *bufio.Writer) {
+		sendEvent := func(event string, data map[string]interface{}) {
+			d, _ := json.Marshal(data)
+			fmt.Fprintf(w, "event: %s\ndata: %s\n\n", event, string(d))
+			w.Flush()
+		}
+
+		// 请假记录 ID：申请时平台尚未生成，用时间戳占位（日志/展示用）
+		applyLeaveID := "apply_" + strconv.FormatInt(time.Now().Unix(), 10)
+
+		// 类型配置（拿 needApproval/enableAttach/mustOut 等权威开关做服务端校验）
+		title := leaveApplyLogTitle(req.LeaveType, req.StartTime, req.EndTime)
+		saveLog := func(isSuccess bool, errMsg string) {
+			logEntry := model.CpLeaveLog{
+				UserID:       userID,
+				LeaveID:      applyLeaveID,
+				Title:        title,
+				SchoolName:   user.SchoolName,
+				Action:       model.LeaveActionApply,
+				IsSuccess:    isSuccess,
+				ErrorMessage: errMsg,
+			}
+			database.DB.Create(&logEntry)
+		}
+
+		isVip := user.VipExpireAt != nil && user.VipExpireAt.After(time.Now())
+
+		if !isVip && user.SignCount <= 0 {
+			slog.Warn("请假次数不足，拒绝执行", "userId", userID)
+			sendEvent("task_error", map[string]interface{}{"message": "可用次数不足，请购买CDK或通过邀请获得次数"})
+			return
+		}
+
+		// 限流：与销假同规则（同一用户维度）
+		rateKey := fmt.Sprintf("leave-apply:%d", userID)
+		rules := []ratelimit.Rule{
+			{Limit: 3, Window: 2 * time.Minute, Label: "2m"},
+			{Limit: 6, Window: 1 * time.Hour, Label: "1h"},
+			{Limit: 10, Window: 24 * time.Hour, Label: "1d"},
+		}
+		if ok, msg := ratelimit.AllowMulti(rateKey, rules); !ok {
+			slog.Warn("请假触发限流", "userId", userID, "msg", msg)
+			sendEvent("task_error", map[string]interface{}{"message": msg, "rateLimit": true})
+			return
+		}
+
+		sendEvent("connecting", map[string]interface{}{"status": "connecting", "message": "正在连接今日校园..."})
+
+		cookieMap := cpd.ParseCookieJSON(user.Cookie)
+		host := getSchoolHost(user.SchoolID)
+
+		// 新套（leave-new）：独立请假链路（类型详情复核 + 审批流 + 明文 JSON 提交）
+		if schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+			sendEvent("submitting", map[string]interface{}{"status": "submitting", "message": "正在提交请假申请..."})
+			ok, errMsg, needReLogin, needApprover := leaveNewExecuteApply(&user, cookieMap, host, req, imageURLs)
+			if !ok {
+				slog.Error("请假申请失败(新套)", "userId", userID, "error", errMsg)
+				saveLog(false, errMsg)
+				sendEvent("task_error", map[string]interface{}{
+					"status":       "error",
+					"message":      errMsg,
+					"needReLogin":  needReLogin,
+					"needApprover": needApprover,
+				})
+				return
+			}
+			saveLog(true, "")
+			if !isVip {
+				database.DB.Model(&model.SysUser{}).Where("id = ? AND sign_count > 0", userID).
+					Update("sign_count", gorm.Expr("sign_count - 1"))
+				sendEvent("success", map[string]interface{}{"status": "success", "message": "请假申请提交成功！"})
+			} else {
+				sendEvent("success", map[string]interface{}{"status": "success", "message": "请假申请提交成功！（VIP 免扣次数）"})
+			}
+			slog.Info("请假申请成功(新套)", "userId", userID, "leaveType", req.LeaveType, "start", req.StartTime, "end", req.EndTime, "isVip", isVip)
+			return
+		}
+
+		// 1. 获取类型配置（服务端复核开关，避免前端被绕过）
+		cfg, err := cpd.FetchLeaveTypeCfg(cookieMap, host, req.LeaveType)
+		if err != nil && isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				cfg, err = cpd.FetchLeaveTypeCfg(cookieMap, host, req.LeaveType)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			errMsg := "获取请假类型配置失败: " + err.Error()
+			if errors.Is(err, ErrPasswordChanged) {
+				errMsg = "登录凭证已过期，请重新登录"
+			}
+			slog.Error("获取请假类型配置失败", "userId", userID, "leaveType", req.LeaveType, "error", err)
+			saveLog(false, errMsg)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needReLogin": errors.Is(err, ErrPasswordChanged)})
+			return
+		}
+		if cfg.DisableTime == 1 {
+			errMsg := "该请假类型当前不可用，请选择其他类型"
+			saveLog(false, errMsg)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+			return
+		}
+		if cfg.ReasonWordLimit > 0 && len([]rune(req.LeaveReason)) < cfg.ReasonWordLimit {
+			errMsg := fmt.Sprintf("请假原因至少 %d 字", cfg.ReasonWordLimit)
+			saveLog(false, errMsg)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+			return
+		}
+		// 审批人：needApproval=1 且学校配置了候选审批人时必选；
+		// 候选列表为空（学校未配置审批节点人员，如 ysdwl「大四学生请假」）时允许不选，跳过即可
+		if cfg.NeedApproval == 1 && req.ApproverWid == "" {
+			candidates, err := cpd.FetchReportApprovers(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime)
+			if err != nil {
+				errMsg := "获取请假审批人失败: " + err.Error()
+				slog.Warn("校验审批人候选失败", "userId", userID, "error", err)
+				saveLog(false, errMsg)
+				sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+				return
+			}
+			if len(candidates) > 0 {
+				errMsg := "该请假类型需要选择审批人"
+				saveLog(false, errMsg)
+				sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needApprover": true})
+				return
+			}
+			slog.Info("该类型无候选审批人，允许不选提交", "userId", userID, "leaveType", req.LeaveType)
+		}
+
+		// 附件复核：类型开关 + 数量上限（学校配置为准，产品上限 4 张）
+		// 注意：实测多所旧套学校 enableAttach 恒为 0（该字段在旧套不代表"可传附件"），
+		// 是否允许以 attachmentNumberLimit>0 为准；仅当两者都表明不可用时才拒绝。
+		if len(imageURLs) > 0 {
+			if cfg.EnableAttach != 1 && cfg.AttachmentNumberLimit <= 0 {
+				errMsg := "该请假类型不支持上传附件"
+				saveLog(false, errMsg)
+				sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+				return
+			}
+			if maxN := cpd.LeaveMaxAttachCount(cfg.AttachmentNumberLimit); len(imageURLs) > maxN {
+				errMsg := fmt.Sprintf("附件最多 %d 张", maxN)
+				saveLog(false, errMsg)
+				sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+				return
+			}
+		}
+
+		// 2. 可请假检查
+		if err := cpd.CheckOnceLeave(cookieMap, host); err != nil {
+			errMsg := "当前不可请假: " + err.Error()
+			slog.Warn("checkOnceLeave 拒绝", "userId", userID, "error", err)
+			saveLog(false, errMsg)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+			return
+		}
+
+		// 3. 构造表单并提交
+		sendEvent("submitting", map[string]interface{}{"status": "submitting", "message": "正在提交请假申请..."})
+		p := cpd.LeaveApplyParams{
+			LeaveType:     req.LeaveType,
+			StartTime:     req.StartTime,
+			EndTime:       req.EndTime,
+			LeaveReason:   req.LeaveReason,
+			OutStatus:     req.OutStatus,
+			UrgencyMobile: req.UrgencyMobile,
+			Address:       req.Address,
+			DetailAddress: req.DetailAddress,
+			Longitude:     req.Longitude,
+			Latitude:      req.Latitude,
+			LocationAddr:  req.LocationAddr,
+			ImageURLs:     imageURLs,
+			ApproverWid:   req.ApproverWid,
+			ApproverId:    req.ApproverId,
+			ApproverName:  req.ApproverName,
+			CcUsers:       req.CcUsers,
+		}
+		form := cpd.BuildLeaveApplyForm(p, user.MobileCode, "15", "9.9.6")
+		err = cpd.SubmitLeaveApply(cookieMap, host, form, req.Longitude, req.Latitude, user.MobileCode, user.StudentID)
+		if err != nil && isCookieExpired(err) {
+			slog.Info("提交请假cookie过期，尝试自动刷新", "userId", userID)
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				err = cpd.SubmitLeaveApply(cookieMap, host, form, req.Longitude, req.Latitude, user.MobileCode, user.StudentID)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			errMsg := "请假申请失败: " + err.Error()
+			if errors.Is(err, ErrPasswordChanged) {
+				errMsg = "登录凭证已过期，请重新登录"
+			}
+			slog.Error("请假申请失败", "userId", userID, "error", err)
+			saveLog(false, errMsg)
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg, "needReLogin": errors.Is(err, ErrPasswordChanged)})
+			return
+		}
+
+		// 4. 成功：写日志 + 扣减可用次数（VIP 有效期内免扣）
+		saveLog(true, "")
+		if !isVip {
+			database.DB.Model(&model.SysUser{}).Where("id = ? AND sign_count > 0", userID).
+				Update("sign_count", gorm.Expr("sign_count - 1"))
+			sendEvent("success", map[string]interface{}{
+				"status":  "success",
+				"message": "请假申请提交成功！",
+			})
+		} else {
+			sendEvent("success", map[string]interface{}{
+				"status":  "success",
+				"message": "请假申请提交成功！（VIP 免扣次数）",
+			})
+		}
+
+		slog.Info("请假申请成功", "userId", userID, "leaveType", req.LeaveType, "start", req.StartTime, "end", req.EndTime, "isVip", isVip)
+	})
+
+	return nil
+}
+
+// leaveApplyLogTitle 请假日志标题：类型名由前端传入 code 时的兜底为「请假」
+func leaveApplyLogTitle(leaveType int, startTime, endTime string) string {
+	title := fmt.Sprintf("请假申请（类型%d）", leaveType)
+	if startTime != "" && endTime != "" {
+		title = fmt.Sprintf("请假申请 %s ~ %s", startTime, endTime)
+	}
+	return title
+}

backed/internal/handler/leave_apply_attach_test.go

@@ -0,0 +1,97 @@
+package handler
+
+import (
+	"testing"
+
+	cpd "cpdaily-new/internal/service/cpdaily"
+)
+
+// TestMergeApplyImageURLs 附件合并：多图字段 + 旧前端兼容单图字段，
+// 保序去重、剔除空串与首尾空白（避免旧缓存包附件被静默丢弃或重复提交）。
+func TestMergeApplyImageURLs(t *testing.T) {
+	cases := []struct {
+		name   string
+		urls   []string
+		legacy string
+		want   []string
+	}{
+		{
+			name:   "仅多图字段",
+			urls:   []string{"a", "b"},
+			legacy: "",
+			want:   []string{"a", "b"},
+		},
+		{
+			name:   "仅旧单图字段",
+			urls:   nil,
+			legacy: "a",
+			want:   []string{"a"},
+		},
+		{
+			name:   "旧字段与多图重复应去重",
+			urls:   []string{"a", "b"},
+			legacy: "a",
+			want:   []string{"a", "b"},
+		},
+		{
+			name:   "旧字段不在多图中应追加",
+			urls:   []string{"a"},
+			legacy: "c",
+			want:   []string{"a", "c"},
+		},
+		{
+			name:   "空串与空白剔除",
+			urls:   []string{"", "  ", "a"},
+			legacy: " ",
+			want:   []string{"a"},
+		},
+		{
+			name:   "首尾空白裁剪",
+			urls:   []string{" a ", "  b"},
+			legacy: "",
+			want:   []string{"a", "b"},
+		},
+		{
+			name:   "全部为空",
+			urls:   []string{""},
+			legacy: "",
+			want:   []string{},
+		},
+	}
+	for _, c := range cases {
+		t.Run(c.name, func(t *testing.T) {
+			got := mergeApplyImageURLs(c.urls, c.legacy)
+			if len(got) != len(c.want) {
+				t.Fatalf("mergeApplyImageURLs(%v, %q) = %v, want %v", c.urls, c.legacy, got, c.want)
+			}
+			for i := range got {
+				if got[i] != c.want[i] {
+					t.Fatalf("mergeApplyImageURLs(%v, %q) = %v, want %v", c.urls, c.legacy, got, c.want)
+				}
+			}
+		})
+	}
+}
+
+// TestLeaveNewToLeaveTypesAttachGating 新套类型翻译：材料区不可见时不得带出数量上限，
+// 否则前端按「上限>0」的条件会误显示上传入口（旧套学校 enableAttach 恒为 0 的同类问题）。
+func TestLeaveNewToLeaveTypesAttachGating(t *testing.T) {
+	types := []cpd.LeaveNewType{
+		{TypeWid: 1, TypeName: "可见类型"},
+		{TypeWid: 2, TypeName: "不可见类型"},
+	}
+	details := map[int]*cpd.LeaveNewFormDetail{
+		1: {TypeName: "可见类型", IsVisibledEvidenceFile: true, EvidenceFileCountMax: 4},
+		2: {TypeName: "不可见类型", IsVisibledEvidenceFile: false, EvidenceFileCountMax: 10},
+	}
+	out := leaveNewToLeaveTypes(types, func(wid int) *cpd.LeaveNewFormDetail { return details[wid] })
+	if len(out) != 2 {
+		t.Fatalf("期望 2 个类型, got %d", len(out))
+	}
+	if out[0].EnableAttach != 1 || out[0].AttachmentNumberLimit != 4 {
+		t.Errorf("可见类型应带出开关与上限: %+v", out[0])
+	}
+	if out[1].EnableAttach != 0 || out[1].AttachmentNumberLimit != 0 {
+		t.Errorf("不可见类型不应带出上限（否则前端误显示）: %+v", out[1])
+	}
+}

backed/internal/handler/leave_flavor.go

@@ -0,0 +1,126 @@
+package handler
+
+import (
+	"log/slog"
+	"sync"
+	"time"
+
+	"cpdaily-new/internal/model"
+	cpd "cpdaily-new/internal/service/cpdaily"
+)
+
+// 请假应用套件分流（新旧两套 API 并存）：
+//
+//	新套 wec-counselor-leave-new-apps（「请销假」应用，部分学校已迁移，旧前缀被 420 拦截）
+//	旧套 wec-counselor-leave-apps（「请假」应用，默认）
+//
+// 分流依据：辅导猫 getAppInfos 返回的本校应用列表（openUrl 指向哪套）；
+// 探测失败时试探新套端点兜底；结果按学校缓存 30 分钟。
+
+type leaveFlavorCacheEntry struct {
+	flavor  cpd.LeaveAppFlavor
+	expire  time.Time
+}
+
+var leaveFlavorCache sync.Map // schoolID -> leaveFlavorCacheEntry
+
+const leaveFlavorCacheTTL = 30 * time.Minute
+
+// schoolLeaveFlavor 获取（并缓存）学校请假应用套件类型
+func schoolLeaveFlavor(user *model.SysUser, cookieMap map[string]string) cpd.LeaveAppFlavor {
+	if v, ok := leaveFlavorCache.Load(user.SchoolID); ok {
+		if e, ok2 := v.(leaveFlavorCacheEntry); ok2 && time.Now().Before(e.expire) {
+			return e.flavor
+		}
+	}
+
+	host := getSchoolHost(user.SchoolID)
+	flavor, openURL := cpd.FetchLeaveAppFlavor(cookieMap, host)
+	if flavor == cpd.LeaveFlavorUnknown {
+		// getAppInfos 失败/无请假应用：试探新套端点兜底
+		if cpd.PingLeaveNew(cookieMap, host) {
+			flavor = cpd.LeaveFlavorNew
+		} else {
+			// 默认按旧套处理（cookie 过期等场景下旧套错误的语义更准确）
+			flavor = cpd.LeaveFlavorOld
+		}
+	}
+	slog.Info("请假应用套件分流", "schoolId", user.SchoolID, "flavor", flavor.String(), "openUrl", openURL)
+	leaveFlavorCache.Store(user.SchoolID, leaveFlavorCacheEntry{flavor: flavor, expire: time.Now().Add(leaveFlavorCacheTTL)})
+	return flavor
+}
+
+// invalidateLeaveFlavor 清缓存（应用迁移后可强制重探）
+func invalidateLeaveFlavor(schoolID string) {
+	leaveFlavorCache.Delete(schoolID)
+}
+
+// ---------- 新套 → 现有前端契约的翻译 ----------
+
+// leaveNewToLeaveTypes 新套类型列表 → 旧契约 LeaveType（前端零改动消费）
+func leaveNewToLeaveTypes(list []cpd.LeaveNewType, detailOf func(typeWid int) *cpd.LeaveNewFormDetail) []cpd.LeaveType {
+	out := make([]cpd.LeaveType, 0, len(list))
+	for _, t := range list {
+		item := cpd.LeaveType{
+			Code: t.TypeWid,
+			Name: t.TypeName,
+		}
+		if d := detailOf(t.TypeWid); d != nil {
+			if d.TypeName != "" {
+				item.Name = d.TypeName
+			}
+			// mustOut=1 表示离校开关固定打开且不可改（新套 isLeaveOut=1)
+			if d.IsLeaveOut == 1 {
+				item.MustOut = 1
+			}
+			// 是否需要审批人由 apply-approvers 实际候选判断；
+			// 类型列表阶段以审批流存在性做提示（有审批流则显示审批人区）
+			item.NeedApproval = 1
+			if d.IsVisibledEvidenceFile {
+				item.EnableAttach = 1
+				item.AttachmentNumberLimit = d.EvidenceFileCountMax
+			} else {
+				// 材料区不可见时不得带出上限，否则前端按「上限>0」会误显示上传入口
+				item.AttachmentNumberLimit = 0
+			}
+			item.ReasonWordLimit = d.LeaveReasonWordsMini
+			item.DisableTime = 0
+			item.LimitDay = 0
+		} else {
+			// 详情获取失败：保守默认（不阻塞列表）
+			item.NeedApproval = 1
+			item.EnableAttach = 1
+		}
+		out = append(out, item)
+	}
+	return out
+}
+
+// leaveNewPlacesToLeaveReportPlaces 新套销假位置 → 旧契约 LeaveReportPlace
+func leaveNewPlacesToLeaveReportPlaces(list []cpd.LeaveNewReportPlace) []cpd.LeaveReportPlace {
+	out := make([]cpd.LeaveReportPlace, 0, len(list))
+	for _, p := range list {
+		out = append(out, cpd.LeaveReportPlace{
+			Wid:       p.Wid,
+			Address:   p.Address,
+			Longitude: p.Longitude,
+			Latitude:  p.Latitude,
+			Radius:    p.Radius,
+			CounName:  p.CounName,
+		})
+	}
+	return out
+}
+
+// leaveNewApproversToLeaveApprovers 新套审批人 → 旧契约 LeaveApprover（前端展示用）
+func leaveNewApproversToLeaveApprovers(list []cpd.LeaveNewApprover) []cpd.LeaveApprover {
+	out := make([]cpd.LeaveApprover, 0, len(list))
+	for _, a := range list {
+		out = append(out, cpd.LeaveApprover{
+			UserWid:  a.UserWid,
+			UserId:   a.UserId,
+			UserName: a.UserName,
+		})
+	}
+	return out
+}

backed/internal/handler/leave_new_exec.go

@@ -0,0 +1,273 @@
+package handler
+
+import (
+	"errors"
+	"fmt"
+	"log/slog"
+	"strings"
+
+	"cpdaily-new/internal/model"
+	cpd "cpdaily-new/internal/service/cpdaily"
+)
+
+// ---------- 新套执行链路（请假/销假） ----------
+
+// leaveNewResolveApproverAndFlow 服务端自取审批流：按 userWid 匹配完整审批人对象 + flowData。
+// 返回 (approver, flowData, candidates, err)：
+//   - approver 为 nil 表示未提供 userWid 或未匹配（调用方决定是否放行）
+//   - candidates 为全部候选（用于「无候选可放行」判定）
+func leaveNewResolveApproverAndFlow(cookieMap map[string]string, host string, typeWid int, startTime, endTime, approverWid string) (*cpd.LeaveNewApprover, map[string]interface{}, []cpd.LeaveNewApprover, error) {
+	flow, err := cpd.FetchLeaveNewApproveFlow(cookieMap, host, typeWid, startTime, endTime, "")
+	if err != nil {
+		return nil, nil, nil, err
+	}
+	if approverWid == "" {
+		return nil, flow.FlowData, flow.ApproveUsers, nil
+	}
+	for i := range flow.ApproveUsers {
+		if flow.ApproveUsers[i].UserWid == approverWid {
+			return &flow.ApproveUsers[i], flow.FlowData, flow.ApproveUsers, nil
+		}
+	}
+	return nil, flow.FlowData, flow.ApproveUsers, nil
+}
+
+// leaveNewResolveCcUsers 抄送人 userWid 列表 → 完整对象（新套 getCcSearchList 全量匹配）
+func leaveNewResolveCcUsers(cookieMap map[string]string, host string, widList []string) []cpd.LeaveNewApprover {
+	if len(widList) == 0 {
+		return nil
+	}
+	all, err := cpd.FetchLeaveNewCcSearch(cookieMap, host, "")
+	if err != nil {
+		slog.Warn("获取抄送人候选失败，抄送人将被忽略", "error", err)
+		return nil
+	}
+	want := make(map[string]bool, len(widList))
+	for _, w := range widList {
+		if w != "" {
+			want[w] = true
+		}
+	}
+	out := make([]cpd.LeaveNewApprover, 0, len(widList))
+	seen := make(map[string]bool, len(widList))
+	for _, a := range all {
+		if want[a.UserWid] && !seen[a.UserWid] {
+			seen[a.UserWid] = true
+			out = append(out, a)
+		}
+	}
+	return out
+}
+
+// leaveNewTypeIsLeaveOut 新套类型详情 → 离校语义：
+// isLeaveOut=1 强制离校；isLeaveOut=0 强制不离校；其余由用户选择
+func leaveNewTypeIsLeaveOut(d *cpd.LeaveNewFormDetail) int {
+	if d == nil {
+		return -1
+	}
+	return d.IsLeaveOut
+}
+
+// leaveNewValidateApplyForm 新套请假表单的服务端复核（标题/原因字数/证明材料）
+func leaveNewValidateApplyForm(d *cpd.LeaveNewFormDetail, req ExecuteLeaveApplyRequest, imageURLs []string) string {
+	if d == nil {
+		return ""
+	}
+	if d.IsRequiredLeaveReason && strings.TrimSpace(req.LeaveReason) == "" {
+		return "请填写请假原因"
+	}
+	if d.LeaveReasonWordsMini > 0 && len([]rune(req.LeaveReason)) < d.LeaveReasonWordsMini {
+		return fmt.Sprintf("请假原因不能少于 %d 字", d.LeaveReasonWordsMini)
+	}
+	// 证明材料（附件）：多图复核 —— 可见性开关 / 必填 / 张数下限 / 学校上限（产品上限 4）
+	if len(imageURLs) > 0 {
+		if !d.IsVisibledEvidenceFile {
+			return "该请假类型不支持上传附件"
+		}
+		if maxN := cpd.LeaveMaxAttachCount(d.EvidenceFileCountMax); len(imageURLs) > maxN {
+			return fmt.Sprintf("附件最多 %d 张", maxN)
+		}
+	}
+	if d.IsRequiredEvidence {
+		if len(imageURLs) == 0 {
+			return "请上传证明材料"
+		}
+		if d.EvidenceFileCountMini > 0 && len(imageURLs) < d.EvidenceFileCountMini {
+			return fmt.Sprintf("证明材料至少 %d 张", d.EvidenceFileCountMini)
+		}
+	}
+	return ""
+}
+
+// ---------- 新套销假执行 ----------
+
+// leaveNewExecuteReport 新套销假执行（供 handler SSE 调用）。
+// 返回 (是否成功, 用户可见错误信息, 需要重新登录)
+func leaveNewExecuteReport(user *model.SysUser, cookieMap map[string]string, host string,
+	leaveID, address, longitude, latitude, imageURL, approverWid string) (bool, string, bool) {
+
+	// 1. 详情 + 状态复核（是否处于可销假状态）
+	detail, err := cpd.FetchLeaveNewDetail(cookieMap, host, leaveID)
+	if err != nil {
+		if isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				detail, err = cpd.FetchLeaveNewDetail(cookieMap, host, leaveID)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				return false, "登录凭证已过期，请重新登录", true
+			}
+		}
+		if err != nil {
+			return false, "获取请假详情失败: " + err.Error(), false
+		}
+	}
+	if !detail.CanReport {
+		return false, fmt.Sprintf("当前请假单不可销假（状态：%s）", detail.StatusText), false
+	}
+
+	// 2. 确认人（reportMode=2 老师审批销假时需要）
+	var approver *cpd.LeaveNewApprover
+	if detail.ReportMode == "2" && approverWid != "" {
+		list, err := cpd.FetchLeaveNewReportApprovers(cookieMap, host, leaveID)
+		if err == nil {
+			for i := range list {
+				if list[i].UserWid == approverWid {
+					approver = &list[i]
+					break
+				}
+			}
+		}
+	}
+
+	// 3. 构造并提交
+	form := cpd.BuildLeaveNewReportForm(cpd.LeaveNewReportParams{
+		LeaveID:   leaveID,
+		Address:   address,
+		Longitude: longitude,
+		Latitude:  latitude,
+		ImageURL:  imageURL,
+		Approver:  approver,
+		UserID:    user.StudentID,
+		DeviceID:  user.MobileCode,
+		Model:     "cpdaily",
+	})
+	err = cpd.SubmitLeaveNewReport(cookieMap, host, form)
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			err = cpd.SubmitLeaveNewReport(cookieMap, host, form)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			return false, "登录凭证已过期，请重新登录", true
+		}
+	}
+	if err != nil {
+		return false, "销假失败: " + err.Error(), false
+	}
+	return true, "", false
+}
+
+// ---------- 新套请假执行 ----------
+
+// leaveNewExecuteApply 新套请假执行（供 handler SSE 调用）。
+// 返回 (是否成功, 用户可见错误信息, 需要重新登录, 需要选择审批人)
+func leaveNewExecuteApply(user *model.SysUser, cookieMap map[string]string, host string, req ExecuteLeaveApplyRequest, imageURLs []string) (bool, string, bool, bool) {
+	// 1. 类型详情复核
+	detail, err := cpd.FetchLeaveNewTypeDetail(cookieMap, host, req.LeaveType)
+	if err != nil {
+		if isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				detail, err = cpd.FetchLeaveNewTypeDetail(cookieMap, host, req.LeaveType)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				return false, "登录凭证已过期，请重新登录", true, false
+			}
+		}
+		if err != nil {
+			return false, "获取请假类型配置失败: " + err.Error(), false, false
+		}
+	}
+	if msg := leaveNewValidateApplyForm(detail, req, imageURLs); msg != "" {
+		return false, msg, false, false
+	}
+
+	// 2. 审批流：取 flowData + 匹配完整审批人
+	approver, flowData, candidates, err := leaveNewResolveApproverAndFlow(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime, req.ApproverWid)
+	if err != nil {
+		if isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				approver, flowData, candidates, err = leaveNewResolveApproverAndFlow(cookieMap, host, req.LeaveType, req.StartTime, req.EndTime, req.ApproverWid)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				return false, "登录凭证已过期，请重新登录", true, false
+			}
+		}
+		if err != nil {
+			return false, "获取请假审批人失败: " + err.Error(), false, false
+		}
+	}
+	if req.ApproverWid == "" && len(candidates) > 0 {
+		return false, "该请假类型需要选择审批人", false, true
+	}
+
+	// 3. 抄送人解析（非必填）
+	ccWids := make([]string, 0, len(req.CcUsers))
+	for _, cc := range req.CcUsers {
+		ccWids = append(ccWids, cc.UserWid)
+	}
+	ccUsers := leaveNewResolveCcUsers(cookieMap, host, ccWids)
+
+	// 4. 离校语义：类型强制时以类型为准
+	isLeaveOut := 0
+	if req.OutStatus {
+		isLeaveOut = 1
+	}
+	if fixed := leaveNewTypeIsLeaveOut(detail); fixed == 1 {
+		isLeaveOut = 1
+	} else if fixed == 0 && detail != nil {
+		isLeaveOut = 0
+	}
+
+	form := cpd.BuildLeaveNewApplyForm(cpd.LeaveNewApplyParams{
+		TypeWid:         req.LeaveType,
+		BeginTime:       trimSeconds(req.StartTime),
+		EndTime:         trimSeconds(req.EndTime),
+		LeaveReason:     req.LeaveReason,
+		ImageURLs:       imageURLs,
+		LocationAddr:    req.LocationAddr,
+		Longitude:       req.Longitude,
+		Latitude:        req.Latitude,
+		IsLeaveOut:      isLeaveOut,
+		Destination:     req.Address,
+		Detail:          req.DetailAddress,
+		EmergencyName:   req.UrgencyMobile,
+		EmergencyMobile: req.UrgencyMobile,
+		Approver:        approver,
+		CcUsers:         ccUsers,
+		FlowData:        flowData,
+		UserID:          user.StudentID,
+		DeviceID:        user.MobileCode,
+		Model:           "cpdaily",
+	})
+	err = cpd.SubmitLeaveNewApply(cookieMap, host, form)
+	if err != nil && isCookieExpired(err) {
+		if refreshErr := refreshCpdailyCookie(user); refreshErr == nil {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			err = cpd.SubmitLeaveNewApply(cookieMap, host, form)
+		} else if errors.Is(refreshErr, ErrPasswordChanged) {
+			return false, "登录凭证已过期，请重新登录", true, false
+		}
+	}
+	if err != nil {
+		return false, "请假申请失败: " + err.Error(), false, false
+	}
+	return true, "", false, false
+}
+
+// trimSeconds "yyyy-MM-dd HH:mm:ss" → "yyyy-MM-dd HH:mm"（新套时间格式）
+func trimSeconds(t string) string {
+	t = strings.TrimSpace(t)
+	if len(t) == 19 && t[16] == ':' && t[13] == ':' {
+		return t[:16]
+	}
+	return t
+}

backed/internal/handler/leave_new_handler.go

@@ -0,0 +1,228 @@
+package handler
+
+import (
+	"errors"
+	"fmt"
+	"log/slog"
+
+	"cpdaily-new/internal/database"
+	"cpdaily-new/internal/model"
+	cpd "cpdaily-new/internal/service/cpdaily"
+	"cpdaily-new/internal/utils"
+
+	"github.com/gofiber/fiber/v2"
+)
+
+// ---------- 新套（wec-counselor-leave-new-apps）handler 适配 ----------
+//
+// 设计：新套数据在 handler 层翻译为现有前端契约（LeaveType/LeaveItem/LeaveApprover），
+// 前端无需感知新旧差异；老套逻辑保持原样，仅按 flavor 分流。
+
+// refreshAfterCookieExpired 通用「cookie 过期→刷新→重试一次」包装
+func refreshAfterCookieExpired(user *model.SysUser, err error, retry func() error) error {
+	if err == nil || !isCookieExpired(err) {
+		return err
+	}
+	slog.Info("cookie过期，尝试刷新", "userId", user.ID)
+	if refreshErr := refreshCpdailyCookie(user); refreshErr != nil {
+		if errors.Is(refreshErr, ErrPasswordChanged) {
+			return ErrPasswordChanged
+		}
+		return err
+	}
+	return retry()
+}
+
+// ---------- 销假：待销假列表（新套） ----------
+
+// fetchLeaveNewPendingList 新套待销假列表：拉全部记录 → 过滤可销假 → 补位置与开关
+func fetchLeaveNewPendingList(cookieMap map[string]string, host string, user *model.SysUser) ([]cpd.LeaveItem, error) {
+	records, err := cpd.FetchLeaveNewList(cookieMap, host, 1, 50, "1")
+	if err != nil {
+		return nil, err
+	}
+
+	// 规定销假位置全局一份（reportList 与记录无关）
+	places := []cpd.LeaveReportPlace{}
+	if p, err := cpd.FetchLeaveNewReportPlaces(cookieMap, host); err == nil {
+		places = leaveNewPlacesToLeaveReportPlaces(p)
+	} else {
+		slog.Warn("获取新套规定销假位置失败", "userId", user.ID, "error", err)
+	}
+
+	list := make([]cpd.LeaveItem, 0, len(records))
+	for _, r := range records {
+		// 列表接口不返回 reportMode/reportUploadMode/isLeaveOut，需补拉详情判断；
+		// 仅对可能可销假的状态（3 休假中 / 4 销假逾期）补详情，减少请求
+		if r.Status != "3" && r.Status != "4" {
+			continue
+		}
+		detail, derr := cpd.FetchLeaveNewDetail(cookieMap, host, r.LeaveID)
+		if derr != nil {
+			slog.Warn("获取新套请假详情失败，跳过该记录", "leaveId", r.LeaveID, "error", derr)
+			continue
+		}
+		if !detail.CanReport {
+			continue
+		}
+		// 销假需要确认人：reportMode=2（老师审批销假）
+		needApprover := detail.ReportMode == "2"
+		enableAttach := detail.ReportUploadMode == "2" || (detail.ReportUploadMode == "1" && detail.IsLeaveOut == "1")
+		list = append(list, cpd.LeaveItem{
+			ID:              detail.LeaveID,
+			LeaveType:       leaveNewTypeNameOfTopic(detail.TopicName, detail.TypeWid),
+			Reason:          detail.LeaveReason,
+			CreateTime:      r.ApplyTime,
+			ActEndTime:      detail.EndTime,
+			Status:          detail.Status,
+			StatusText:      detail.StatusText,
+			ReportPlaces:    places,
+			ReportApplyFlow: needApprover,
+			EnableAttach:    enableAttach,
+		})
+	}
+	return list, nil
+}
+
+// leaveNewTypeNameOfTopic 从 topicName（如「李闯闯的事假」）提取类型名兜底
+func leaveNewTypeNameOfTopic(topicName, typeIcon string) string {
+	if topicName == "" {
+		return "请假"
+	}
+	return topicName
+}
+
+// ---------- 请假类型（新套） ----------
+
+// fetchLeaveNewTypesWithDetail 新套类型列表，逐类型补详情（权威开关）
+func fetchLeaveNewTypesWithDetail(cookieMap map[string]string, host string, user *model.SysUser) ([]cpd.LeaveType, error) {
+	types, err := cpd.FetchLeaveNewTypes(cookieMap, host)
+	if err != nil {
+		return nil, err
+	}
+	details := make(map[int]*cpd.LeaveNewFormDetail, len(types))
+	for _, t := range types {
+		d, err := cpd.FetchLeaveNewTypeDetail(cookieMap, host, t.TypeWid)
+		if err != nil {
+			slog.Warn("获取新套类型详情失败，使用基础信息", "typeWid", t.TypeWid, "error", err)
+			continue
+		}
+		details[t.TypeWid] = d
+	}
+	return leaveNewToLeaveTypes(types, func(wid int) *cpd.LeaveNewFormDetail {
+		return details[wid]
+	}), nil
+}
+
+// ---------- 销假审批人（新套） ----------
+
+// fetchLeaveNewReportApprovers 新套销假确认人（getReportApprovers by leaveId）
+func fetchLeaveNewReportApprovers(cookieMap map[string]string, host, leaveID string, user *model.SysUser) ([]cpd.LeaveApprover, error) {
+	list, err := cpd.FetchLeaveNewReportApprovers(cookieMap, host, leaveID)
+	if err != nil {
+		return nil, err
+	}
+	return leaveNewApproversToLeaveApprovers(list), nil
+}
+
+// ---------- 请假审批人（新套） ----------
+
+// leaveNewApplyApproversResult 新套请假审批人结果（含 flowData 透传）
+type leaveNewApplyApproversResult struct {
+	Approvers []cpd.LeaveApprover  `json:"approvers"`
+	NeedApproval bool              `json:"needApproval"`
+	InFlowScope  bool              `json:"inFlowScope"`
+	FlowData     map[string]interface{} `json:"flowData"`
+}
+
+// fetchLeaveNewApplyApprovers 新套请假审批人 + 审批流数据
+func fetchLeaveNewApplyApprovers(cookieMap map[string]string, host string, typeWid int, startTime, endTime string) (*leaveNewApplyApproversResult, error) {
+	flow, err := cpd.FetchLeaveNewApproveFlow(cookieMap, host, typeWid, startTime, endTime, "")
+	if err != nil {
+		return nil, err
+	}
+	return &leaveNewApplyApproversResult{
+		Approvers:    leaveNewApproversToLeaveApprovers(flow.ApproveUsers),
+		NeedApproval: flow.IsNeedApproval,
+		InFlowScope:  flow.IsInFlowScope,
+		FlowData:     flow.FlowData,
+	}, nil
+}
+
+// GetLeaveNewCcSearch 抄送人搜索（新套；searchKey 为空返回全部）
+func GetLeaveNewCcSearch(c *fiber.Ctx) error {
+	user, err := loadLeaveUser(c)
+	if err != nil {
+		return utils.FailAuth(c, err.Error())
+	}
+
+	var req struct {
+		SearchKey string `json:"searchKey"`
+	}
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+
+	cookieMap := cpd.ParseCookieJSON(user.Cookie)
+	host := getSchoolHost(user.SchoolID)
+
+	list, err := cpd.FetchLeaveNewCcSearch(cookieMap, host, req.SearchKey)
+	if err != nil {
+		_ = refreshAfterCookieExpired(user, err, func() error {
+			cookieMap = cpd.ParseCookieJSON(user.Cookie)
+			var e error
+			list, e = cpd.FetchLeaveNewCcSearch(cookieMap, host, req.SearchKey)
+			return e
+		})
+	}
+	if err != nil {
+		slog.Error("获取抄送人失败", "userId", user.ID, "error", err)
+		if errors.Is(err, ErrPasswordChanged) {
+			return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+		}
+		return utils.Fail(c, 503, "获取抄送人失败: "+err.Error())
+	}
+
+	return utils.Success(c, leaveNewApproversToLeaveApprovers(list))
+}
+
+// buildLeaveNewApproverByWid 从审批人列表找 userWid 对应完整对象（提交表单用）
+func buildLeaveNewApproverByWid(list []cpd.LeaveNewApprover, userWid string) *cpd.LeaveNewApprover {
+	if userWid == "" {
+		return nil
+	}
+	for i := range list {
+		if list[i].UserWid == userWid {
+			return &list[i]
+		}
+	}
+	return nil
+}
+
+// leaveNewCheckCookieFresh 简单的 cookie 新鲜度检查（新套首次调用失败即触发刷新重试）
+func leaveNewRetryOnExpired(user *model.SysUser, err error, retry func() error) error {
+	return refreshAfterCookieExpired(user, err, retry)
+}
+
+// leaveNewFriendlyErr 新套错误统一包装（带 401 语义）
+func leaveNewFriendlyErr(c *fiber.Ctx, action string, err error) error {
+	if errors.Is(err, ErrPasswordChanged) {
+		return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+	}
+	return utils.Fail(c, 503, fmt.Sprintf("%s: %v", action, err))
+}
+
+// ---------- 数据库日志辅助 ----------
+
+// saveLeaveLogEntry 请假/销假日志落库（两套共用）
+func saveLeaveLogEntry(userID uint, leaveID, title, schoolName, action string, isSuccess bool, errMsg string) {
+	database.DB.Create(&model.CpLeaveLog{
+		UserID:       userID,
+		LeaveID:      leaveID,
+		Title:        title,
+		SchoolName:   schoolName,
+		Action:       action,
+		IsSuccess:    isSuccess,
+		ErrorMessage: errMsg,
+	})
+}

backed/internal/handler/softdelete_probe_test.go

@@ -0,0 +1,178 @@
+package handler
+
+// 事务级软删除探针：验证「用户删除日志 → 仅软删除」的四处语义。
+// 默认跳过；仅在显式设置 PROBE_DB=1 时连接真实数据库执行（需要 backed/config.toml）。
+// 全过程在单个事务内进行并最终回滚，不写入任何持久数据（AutoMigrate 除外，与 server 启动行为一致）。
+//
+//	go test ./internal/handler -run TestSoftDeleteProbe -v   # 需 PROBE_DB=1
+//
+// 覆盖点：
+//  1. 前台列表（GORM 默认作用域）不展示已删除记录
+//  2. 任务完成状态判定（Unscoped 查当天成功日志）不受删除影响
+//  3. 后台统计（已执行累计 / 今日状态 / 今日卡片）计入已删除记录
+//  4. 后台明细 UNION SQL（adminLogUnionSQL，与 handler 同一常量）含已删除记录并正确标注 deleted/source
+
+import (
+	"fmt"
+	"os"
+	"testing"
+	"time"
+
+	"cpdaily-new/internal/config"
+	"cpdaily-new/internal/database"
+	"cpdaily-new/internal/model"
+)
+
+func TestSoftDeleteProbe(t *testing.T) {
+	if os.Getenv("PROBE_DB") != "1" {
+		t.Skip("跳过：需要 PROBE_DB=1 且可连接数据库")
+	}
+	if err := config.Load("../../config.toml"); err != nil {
+		t.Fatalf("加载配置失败: %v", err)
+	}
+	database.Init()
+
+	tx := database.DB.Begin()
+	if tx.Error != nil {
+		t.Fatalf("开启事务失败: %v", tx.Error)
+	}
+	defer tx.Rollback() // 无论成败一律回滚，探针不留痕
+
+	// ---------- 构造数据（全部在事务内，ID 由自增分配） ----------
+	user := model.SysUser{
+		Username:   fmt.Sprintf("sdprobe_%d", time.Now().UnixNano()),
+		Password:   "probe",
+		SchoolID:   "probe",
+		StudentID:  "probe",
+		InviteCode: fmt.Sprintf("p%09d", time.Now().UnixNano()%1000000000), // 避免唯一索引冲突
+	}
+	if err := tx.Create(&user).Error; err != nil {
+		t.Fatalf("创建探针用户失败: %v", err)
+	}
+	uid := user.ID
+
+	taskLog := model.CpTaskLog{
+		CpTaskID: 1, UserID: uid, TaskType: "sign",
+		Title: "探针签到", RealTitle: "探针签到", IsSuccess: true,
+	}
+	leaveLog := model.CpLeaveLog{
+		UserID: uid, LeaveID: "probe_leave", Title: "探针请假",
+		SchoolName: "探针学校", Action: model.LeaveActionApply, IsSuccess: true,
+	}
+	if err := tx.Create(&taskLog).Error; err != nil {
+		t.Fatalf("创建任务日志失败: %v", err)
+	}
+	if err := tx.Create(&leaveLog).Error; err != nil {
+		t.Fatalf("创建请假日志失败: %v", err)
+	}
+
+	// 用户端「删除」= GORM 软删除（handler 中即 database.DB.Delete(&log)）
+	if err := tx.Delete(&taskLog).Error; err != nil {
+		t.Fatalf("软删除任务日志失败: %v", err)
+	}
+	if err := tx.Delete(&leaveLog).Error; err != nil {
+		t.Fatalf("软删除请假日志失败: %v", err)
+	}
+
+	// 回读确认 deleted_at 已置位（而非物理删除）
+	var rawCount int64
+	if err := tx.Unscoped().Model(&model.CpTaskLog{}).Where("id = ? AND deleted_at IS NOT NULL", taskLog.ID).Count(&rawCount).Error; err != nil || rawCount != 1 {
+		t.Fatalf("任务日志未软删除: count=%d err=%v", rawCount, err)
+	}
+	if err := tx.Unscoped().Model(&model.CpLeaveLog{}).Where("id = ? AND deleted_at IS NOT NULL", leaveLog.ID).Count(&rawCount).Error; err != nil || rawCount != 1 {
+		t.Fatalf("请假日志未软删除: count=%d err=%v", rawCount, err)
+	}
+
+	// ---------- 1. 前台列表不可见（GORM 默认作用域过滤 deleted_at） ----------
+	var frontTask []model.CpTaskLog
+	tx.Where("user_id = ?", uid).Order("created_at DESC").Limit(10).Find(&frontTask)
+	if len(frontTask) != 0 {
+		t.Errorf("[1] 前台任务日志应不可见已删除记录, got %d 条", len(frontTask))
+	}
+	var frontLeave []model.CpLeaveLog
+	tx.Where("user_id = ?", uid).Order("created_at DESC").Limit(10).Find(&frontLeave)
+	if len(frontLeave) != 0 {
+		t.Errorf("[1] 前台请假日志应不可见已删除记录, got %d 条", len(frontLeave))
+	}
+
+	// ---------- 2. 任务完成状态不受删除影响（task.go ListTasks 的跨天重置查询） ----------
+	now := time.Now()
+	startOfToday := time.Date(now.Year(), now.Month(), now.Day(), 0, 0, 0, 0, now.Location())
+	var todaySuccessIDs []uint
+	tx.Unscoped().Model(&model.CpTaskLog{}).
+		Where("user_id = ? AND is_success = 1 AND created_at >= ?", uid, startOfToday).
+		Distinct("cp_task_id").Pluck("cp_task_id", &todaySuccessIDs)
+	if len(todaySuccessIDs) != 1 || todaySuccessIDs[0] != 1 {
+		t.Errorf("[2] 删除当天成功日志后任务完成状态被误重置: IDs=%v", todaySuccessIDs)
+	}
+
+	// ---------- 3. 后台统计计入已删除 ----------
+	var taskSuccess, leaveSuccess int64
+	tx.Unscoped().Model(&model.CpTaskLog{}).Where("user_id = ? AND is_success = 1", uid).Count(&taskSuccess)
+	tx.Unscoped().Model(&model.CpLeaveLog{}).Where("user_id = ? AND is_success = 1", uid).Count(&leaveSuccess)
+	if taskSuccess != 1 || leaveSuccess != 1 {
+		t.Errorf("[3] 后台已执行累计应计入已删除: task=%d leave=%d", taskSuccess, leaveSuccess)
+	}
+	var todayTask, todayLeave int64
+	tx.Unscoped().Model(&model.CpTaskLog{}).Where("user_id = ? AND created_at >= ?", uid, startOfToday).Count(&todayTask)
+	tx.Unscoped().Model(&model.CpLeaveLog{}).Where("user_id = ? AND created_at >= ?", uid, startOfToday).Count(&todayLeave)
+	if todayTask != 1 || todayLeave != 1 {
+		t.Errorf("[3] 今日统计卡片应计入已删除: task=%d leave=%d", todayTask, todayLeave)
+	}
+
+	// ---------- 4. 后台明细 UNION（同一 adminLogUnionSQL 常量） ----------
+	dayStart := time.Date(now.Year(), now.Month(), now.Day(), 0, 0, 0, 0, now.Location())
+	dayEnd := dayStart.AddDate(0, 0, 1)
+	type combinedRow struct {
+		ID        uint
+		UserID    uint
+		TaskType  string
+		Deleted   bool
+		Source    int
+		IsSuccess bool
+	}
+	var rows []combinedRow
+	if err := tx.Raw(adminLogUnionSQL, dayStart, dayEnd, dayStart, dayEnd).Scan(&rows).Error; err != nil {
+		t.Fatalf("[4] UNION 查询失败: %v", err)
+	}
+	var mine []combinedRow
+	for _, r := range rows {
+		if r.UserID == uid {
+			mine = append(mine, r)
+		}
+	}
+	if len(mine) != 2 {
+		t.Fatalf("[4] UNION 应返回 2 条（任务+请假，均含已删除）, got %d", len(mine))
+	}
+	sourceSeen := map[int]bool{}
+	taskTypeSeen := map[string]bool{}
+	for _, r := range mine {
+		if !r.Deleted {
+			t.Errorf("[4] 已删除记录在明细中未标注 deleted: %+v", r)
+		}
+		sourceSeen[r.Source] = true
+		taskTypeSeen[r.TaskType] = true
+	}
+	if !sourceSeen[1] || !sourceSeen[2] {
+		t.Errorf("[4] source 标注缺失: %v", sourceSeen)
+	}
+	if !taskTypeSeen["sign"] || !taskTypeSeen["leave_apply"] {
+		t.Errorf("[4] task_type 映射缺失: %v", taskTypeSeen)
+	}
+
+	// 用户端状态筛选（success=1）走 UNION 包裹分支，确认占位符与包裹 SQL 兼容
+	var successRows []combinedRow
+	tx.Raw("SELECT * FROM ("+adminLogUnionSQL+") t WHERE t.is_success = 1", dayStart, dayEnd, dayStart, dayEnd).Scan(&successRows)
+	found := 0
+	for _, r := range successRows {
+		if r.UserID == uid {
+			found++
+		}
+	}
+	if found != 2 {
+		t.Errorf("[4] success 过滤分支应保留 2 条已删除成功记录, got %d", found)
+	}
+
+	t.Log("软删除探针全部通过：前台隐藏 / 状态不受影响 / 后台计入 / 明细标注")
+	// defer 回滚，探针不落库
+}

backed/internal/handler/task.go

@@ -242,10 +242,20 @@ func SaveTaskForm(c *fiber.Ctx) error {
 	return utils.Success(c, nil)
 }
 
-// TaskWithMatch 任务列表附带匹配状态
-type TaskWithMatch struct {
-	model.CpTask
-	MatchStatus string `json:"matchStatus"` // matched_unsigned, matched_signed, no_match, check_failed
+// TaskListItem 任务列表的轻量响应项。
+// 关键：**不包含 formData**。formData 可能是 longtext（历史数据里存过 base64 图片，
+// 单条曾达 2.9MB），把它放进列表接口会让首页每次多传数 MB。
+// 列表渲染只需要下面这些字段；表单内容另走 /task/form-data/:id 获取。
+type TaskListItem struct {
+	ID            uint      `json:"id"`
+	TaskType      string    `json:"taskType"`
+	Title         string    `json:"title"`
+	RealTitle     string    `json:"realTitle"`
+	TaskStatus    string    `json:"taskStatus"`
+	ErrorMessage  string    `json:"errorMessage"`
+	CreatedAt     time.Time `json:"createdAt"`
+	MatchStatus   string    `json:"matchStatus"`
+	MissingFields []string  `json:"missingFields"` // 必填但为空的字段标题（服务端预计算，前端无需解析 formData）
 }
 
 // globMatch 简单通配符匹配（仅支持 *）
@@ -295,7 +305,9 @@ func ListTasks(c *fiber.Ctx) error {
 	now := time.Now()
 	startOfToday := time.Date(now.Year(), now.Month(), now.Day(), 0, 0, 0, 0, now.Location())
 	var todaySuccessIDs []uint
-	database.DB.Model(&model.CpTaskLog{}).
+	// Unscoped：用户在客户端"删除"日志只是软删除，不代表当天没执行过；
+	// 若漏加会因当天成功日志被删而把任务重置回 pending，导致重复打卡
+	database.DB.Unscoped().Model(&model.CpTaskLog{}).
 		Where("user_id = ? AND is_success = 1 AND created_at >= ?", userID, startOfToday).
 		Distinct("cp_task_id").
 		Pluck("cp_task_id", &todaySuccessIDs)
@@ -347,10 +359,20 @@ func ListTasks(c *fiber.Ctx) error {
 		}
 	}
 
-	// 构造返回结果
-	result := make([]TaskWithMatch, len(tasks))
+	// 构造返回结果（轻量 DTO：不含 formData）
+	result := make([]TaskListItem, len(tasks))
 	for i, task := range tasks {
-		item := TaskWithMatch{CpTask: task, MatchStatus: "check_failed"}
+		item := TaskListItem{
+			ID:            task.ID,
+			TaskType:      task.TaskType,
+			Title:         task.Title,
+			RealTitle:     task.RealTitle,
+			TaskStatus:    task.TaskStatus,
+			ErrorMessage:  task.ErrorMessage,
+			CreatedAt:     task.CreatedAt,
+			MatchStatus:   "check_failed",
+			MissingFields: missingRequiredFormFields(task.FormData),
+		}
 		if fetchOk {
 			item.MatchStatus = "no_match"
 			// 用 title 做 glob 匹配（支持 * 通配符）
@@ -374,6 +396,56 @@ func ListTasks(c *fiber.Ctx) error {
 	return utils.Success(c, result)
 }
 
+// GetTaskSavedForm 返回该任务**已保存**的表单内容（formData），供编辑弹窗预填。
+// 与 GetTaskForm 的区别：后者是从今日校园重新拉取表单模板（会丢失用户已填值）。
+// 单独成接口，是为了让列表接口（/task/list）不必携带大字段 formData。
+func GetTaskSavedForm(c *fiber.Ctx) error {
+	userID := c.Locals("userId").(uint)
+	id := c.Params("id")
+
+	var task model.CpTask
+	if err := database.DB.Select("id", "form_data").
+		Where("id = ? AND user_id = ?", id, userID).First(&task).Error; err != nil {
+		if errors.Is(err, gorm.ErrRecordNotFound) {
+			return utils.Fail(c, 404, "任务不存在")
+		}
+		return utils.FailServer(c, "查询失败")
+	}
+
+	return utils.Success(c, fiber.Map{"formData": task.FormData})
+}
+
+// DecodeTaskQrRequest 二维码解析请求
+type DecodeTaskQrRequest struct {
+	// Content 支持三种形式：base64 图片(dataURI)、http(s) 图片链接、纯 uuid/链接文本
+	Content string `json:"content"`
+}
+
+// DecodeTaskQr 解析签到二维码，返回其中的 uuid。
+// 前端上传二维码图片后调用本接口，把 uuid 存入表单（colName=uuid），
+// 避免把整张 base64 图片写进 formData（历史数据曾因此单条达 2.9MB）。
+func DecodeTaskQr(c *fiber.Ctx) error {
+	var req DecodeTaskQrRequest
+	if err := c.BodyParser(&req); err != nil {
+		return utils.FailParam(c, "请求参数错误")
+	}
+
+	content := strings.TrimSpace(req.Content)
+	if content == "" {
+		return utils.Fail(c, 400, "尚未上传二维码")
+	}
+
+	uuid, err := cpd.ResolveQrUuidFromContent(content)
+	if err != nil {
+		return utils.Fail(c, 400, "二维码解析失败: "+err.Error())
+	}
+	if uuid == "" {
+		return utils.Fail(c, 400, "二维码中未找到有效的二维码ID")
+	}
+
+	return utils.Success(c, fiber.Map{"uuid": uuid})
+}
+
 // DeleteTask 删除任务
 func DeleteTask(c *fiber.Ctx) error {
 	userID := c.Locals("userId").(uint)
@@ -528,7 +600,18 @@ func ExecuteTask(c *fiber.Ctx) error {
 		// 4. 填充表单并提交
 		sendEvent("submitting", map[string]interface{}{"status": "submitting", "message": "正在提交签到..."})
 
-		submitForm := cpd.FillSubmitForm(detail.Rows, formItems, user.MobileCode)
+		submitForm, formErr := cpd.FillSubmitForm(detail.Rows, formItems, user.MobileCode)
+		if formErr != nil {
+			errMsg := "生成签到表单失败: " + formErr.Error()
+			slog.Error("生成签到表单失败", "taskId", id, "error", formErr)
+			database.DB.Model(&task).Updates(map[string]interface{}{
+				"task_status":   "fail",
+				"error_message": errMsg,
+			})
+			saveLog(false, errMsg, taskTitle(task))
+			sendEvent("task_error", map[string]interface{}{"status": "error", "message": errMsg})
+			return
+		}
 		// 历史位置超出查寝组所有签到范围时自动改用最近签到点，避免"位置不在签到范围内"
 		cpd.AdjustSubmitFormToSignRange(submitForm, detail.Rows)
 		// 照片仍是本地预览(base64)时自动上传换取正式 URL（用户上传失败保存的表单/历史遗留数据）
@@ -705,6 +788,27 @@ func GetUploadPolicy(c *fiber.Ctx) error {
 	cookieMap := cpd.ParseCookieJSON(user.Cookie)
 	host := getSchoolHost(user.SchoolID)
 
+	// 请假类图片：新套学校走 leave-new OBS 协议（COS 风格），旧套保持原路径
+	if req.TaskType == string(cpd.TaskTypeLeave) && schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+		policy, err := cpd.GetLeaveNewUploadPolicy(cookieMap, host)
+		if err != nil && isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				policy, err = cpd.GetLeaveNewUploadPolicy(cookieMap, host)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			slog.Error("获取上传策略失败(新套)", "error", err)
+			if errors.Is(err, ErrPasswordChanged) {
+				return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+			}
+			return utils.Fail(c, 503, "获取上传策略失败: "+err.Error())
+		}
+		return utils.Success(c, policy)
+	}
+
 	policy, err := cpd.GetUploadPolicy(cookieMap, host, cpd.TaskType(req.TaskType))
 	if err != nil && isCookieExpired(err) {
 		slog.Info("获取上传策略cookie过期，尝试刷新", "userId", userID)
@@ -749,6 +853,27 @@ func GetPreviewUrl(c *fiber.Ctx) error {
 	cookieMap := cpd.ParseCookieJSON(user.Cookie)
 	host := getSchoolHost(user.SchoolID)
 
+	// 请假类图片预览：新套学校走 leave-new OBS 协议（参数 obsKey）
+	if req.TaskType == string(cpd.TaskTypeLeave) && schoolLeaveFlavor(&user, cookieMap) == cpd.LeaveFlavorNew {
+		previewUrl, err := cpd.GetLeaveNewPreviewURL(cookieMap, host, req.FileKey)
+		if err != nil && isCookieExpired(err) {
+			if refreshErr := refreshCpdailyCookie(&user); refreshErr == nil {
+				cookieMap = cpd.ParseCookieJSON(user.Cookie)
+				previewUrl, err = cpd.GetLeaveNewPreviewURL(cookieMap, host, req.FileKey)
+			} else if errors.Is(refreshErr, ErrPasswordChanged) {
+				err = ErrPasswordChanged
+			}
+		}
+		if err != nil {
+			slog.Error("获取预览 URL 失败(新套)", "error", err)
+			if errors.Is(err, ErrPasswordChanged) {
+				return utils.Fail(c, 401, "登录凭证已过期，请重新登录")
+			}
+			return utils.Fail(c, 503, "获取预览 URL 失败: "+err.Error())
+		}
+		return utils.Success(c, fiber.Map{"previewUrl": previewUrl})
+	}
+
 	previewUrl, err := cpd.GetPreviewUrl(cookieMap, host, cpd.TaskType(req.TaskType), req.FileKey)
 	if err != nil && isCookieExpired(err) {
 		slog.Info("获取预览URL cookie过期，尝试刷新", "userId", userID)

backed/internal/model/cp_leave_log.go

@@ -0,0 +1,34 @@
+package model
+
+import (
+	"time"
+
+	"gorm.io/gorm"
+)
+
+// CpLeaveLog 请假/销假执行日志
+// 说明：DeletedAt 软删除字段——用户在客户端"删除"日志时仅标记 deleted_at，
+// 前台日志列表不再展示，但后台统计仍计入。
+type CpLeaveLog struct {
+	ID           uint           `gorm:"primaryKey;autoIncrement" json:"id"`
+	UserID       uint           `gorm:"not null;index" json:"userId"`
+	LeaveID      string         `gorm:"type:varchar(64);not null" json:"leaveId"`               // 今日校园请假记录 ID（请假申请为 apply_<时间戳>）
+	Title        string         `gorm:"type:varchar(255);not null" json:"title"`                // 日志标题（请假类型名 + 动作）
+	SchoolName   string         `gorm:"type:varchar(255)" json:"schoolName"`                    // 学校名称
+	Action       string         `gorm:"type:varchar(16);not null;default:report" json:"action"` // report=销假 / apply=请假
+	IsSuccess    bool           `gorm:"not null;default:0" json:"isSuccess"`                    // 是否成功
+	ErrorMessage string         `gorm:"type:text" json:"errorMessage"`                          // 失败时的错误信息
+	CreatedAt    time.Time      `json:"createdAt"`
+	UpdatedAt    time.Time      `json:"updatedAt"`
+	DeletedAt    gorm.DeletedAt `gorm:"index" json:"deletedAt"`
+}
+
+func (CpLeaveLog) TableName() string {
+	return "cp_leave_logs"
+}
+
+// 日志动作类型：请假申请 / 销假
+const (
+	LeaveActionApply  = "apply"  // 请假申请
+	LeaveActionReport = "report" // 销假
+)

backed/internal/model/cp_task_log.go

@@ -1,19 +1,26 @@
 package model
 
-import "time"
+import (
+	"time"
+
+	"gorm.io/gorm"
+)
 
 // CpTaskLog 任务执行日志
+// 说明：DeletedAt 软删除字段——用户在客户端"删除"日志时仅标记 deleted_at，
+// 前台日志列表不再展示，但后台统计（已执行次数/今日状态/执行总次数）仍计入。
 type CpTaskLog struct {
-	ID           uint      `gorm:"primaryKey;autoIncrement" json:"id"`
-	CpTaskID     uint      `gorm:"not null;index" json:"cpTaskId"`
-	UserID       uint      `gorm:"not null;index" json:"userId"`
-	TaskType     string    `gorm:"type:varchar(32);not null" json:"taskType"`        // sign / sleep_check
-	Title        string    `gorm:"type:varchar(255);not null" json:"title"`          // 用户设置的任务标题（支持通配符）
-	RealTitle    string    `gorm:"type:varchar(255)" json:"realTitle"`               // 本次执行实际匹配的标题
-	IsSuccess    bool      `gorm:"not null;default:0" json:"isSuccess"`              // 是否成功
-	ErrorMessage string    `gorm:"type:text" json:"errorMessage"`                    // 失败时的错误信息
-	CreatedAt    time.Time `json:"createdAt"`
-	UpdatedAt    time.Time `json:"updatedAt"`
+	ID           uint           `gorm:"primaryKey;autoIncrement" json:"id"`
+	CpTaskID     uint           `gorm:"not null;index" json:"cpTaskId"`
+	UserID       uint           `gorm:"not null;index" json:"userId"`
+	TaskType     string         `gorm:"type:varchar(32);not null" json:"taskType"` // sign / sleep_check
+	Title        string         `gorm:"type:varchar(255);not null" json:"title"`   // 用户设置的任务标题（支持通配符）
+	RealTitle    string         `gorm:"type:varchar(255)" json:"realTitle"`        // 本次执行实际匹配的标题
+	IsSuccess    bool           `gorm:"not null;default:0" json:"isSuccess"`       // 是否成功
+	ErrorMessage string         `gorm:"type:text" json:"errorMessage"`             // 失败时的错误信息
+	CreatedAt    time.Time      `json:"createdAt"`
+	UpdatedAt    time.Time      `json:"updatedAt"`
+	DeletedAt    gorm.DeletedAt `gorm:"index" json:"deletedAt"`
 }
 
 func (CpTaskLog) TableName() string {

backed/internal/service/cpdaily/cookiejar.go

@@ -4,6 +4,7 @@ import (
 	"net/http"
 	"net/url"
 	"sync"
+	"time"
 )
 
 // simpleCookieJar 简化的 CookieJar 实现
@@ -29,6 +30,20 @@ func (j *simpleCookieJar) SetCookies(u *url.URL, cookies []*http.Cookie) {
 		cookieMap[c.Name] = c
 	}
 	for _, c := range cookies {
+		// 删除指令（Max-Age<=0 或 Expires 已过）或空值：一律跳过，既不入库也不删除
+		// 已有同名 cookie。simpleCookieJar 不记录 Path/Domain，无法按 RFC 6265 精确
+		// 匹配删除指令的作用域。云大 CAS 登录 POST 成功后先发
+		//   CASTGC=TGT-...; Path=/authserver
+		// 再发删除指令
+		//   CASTGC=; Max-Age=0; path=/authserver/   （注意尾部斜杠，与 TGT 的 Path 不同）
+		// 浏览器依 RFC 6265 不会删除 TGT，后续 MFA 页面（reAuthLoginView.do）依赖该
+		// TGT 判定 SSO 会话；若按名字粗暴删除 TGT，MFA 页会被 302 踢回登录页。
+		// 若把空值 CASTGC 存进 jar 发送空值，同样会被判定会话异常（历史 bug）。
+		// 跳过删除指令可同时避免这两种问题；同名残留会在下次登录时被 CAS 重新
+		// Set-Cookie 覆盖，无实际副作用。
+		if c.MaxAge < 0 || (!c.Expires.IsZero() && c.Expires.Before(time.Now())) || c.Value == "" {
+			continue
+		}
 		cookieMap[c.Name] = c
 	}
 
@@ -67,3 +82,18 @@ func (j *simpleCookieJar) AllCookies() []*http.Cookie {
 	}
 	return result
 }
+
+// AllCookiesByHost 按域名分组返回所有 cookie（MFA 会话暂存用，保留域结构以便恢复）
+func (j *simpleCookieJar) AllCookiesByHost() map[string][]*http.Cookie {
+	j.mu.RLock()
+	defer j.mu.RUnlock()
+	result := make(map[string][]*http.Cookie, len(j.cookies))
+	for host, cookies := range j.cookies {
+		if len(cookies) > 0 {
+			cp := make([]*http.Cookie, len(cookies))
+			copy(cp, cookies)
+			result[host] = cp
+		}
+	}
+	return result
+}

backed/internal/service/cpdaily/image.go

@@ -30,6 +30,9 @@ func getImageUrlPrefix(taskType TaskType) string {
 	switch taskType {
 	case TaskTypeSleepCheck:
 		return "/wec-counselor-attendance-apps/student/attendance"
+	case TaskTypeLeave:
+		// 销假图片上传走请假模块
+		return "/wec-counselor-leave-apps/leave"
 	case TaskTypeSign:
 		return "/wec-counselor-sign-apps/stu"
 	default:
@@ -142,6 +145,9 @@ func GetPreviewUrl(cookieMap map[string]string, host string, taskType TaskType,
 	switch taskType {
 	case TaskTypeSleepCheck:
 		apiPath = "/previewAttachment"
+	case TaskTypeLeave:
+		// 销假图片预览走请假模块 OBS 接口
+		apiPath = "/obs/previewAttachment"
 	case TaskTypeSign:
 		apiPath = "/sign/previewAttachment"
 	default:

backed/internal/service/cpdaily/leave.go

@@ -0,0 +1,447 @@
+package cpdaily
+
+import (
+	"encoding/json"
+	"fmt"
+	"io"
+	"log/slog"
+	"strconv"
+	"strings"
+)
+
+// 销假（请假销假）功能。
+// 对应今日校园 wec-counselor-leave-apps 模块：
+//
+//	待销假列表：POST {host}/wec-counselor-leave-apps/leave/stu/listOther
+//	请假详情：  POST {host}/wec-counselor-leave-apps/leave/stu/detailOther
+//	审批人列表：POST {host}/wec-counselor-leave-apps/leave/stu/obtainApproveFlow
+//	提交销假：  POST {host}/wec-counselor-leave-apps/leave/report
+const leaveAPIBase = "/wec-counselor-leave-apps/leave"
+
+// LeaveReportPlace 学校规定的销假位置（详情 reportPlaces 元素）。
+// 销假提交的位置应在其中一个位置的 radius（米）范围内；
+// 老版本取 leaveExtends[0]（续假位置）或 detail.applyLocation（请假提交时定位），
+// 均非学校规定的销假位置，已按真实接口修正为 reportPlaces。
+type LeaveReportPlace struct {
+	Wid       string `json:"wid"`
+	Address   string `json:"address"`
+	Longitude string `json:"longitude"`
+	Latitude  string `json:"latitude"`
+	Radius    string `json:"radius"`   // 允许范围半径（米）
+	CounName  string `json:"counName"` // 位置设置人
+}
+
+// LeaveApprover 销假可选审批人（leaveType.reportApplyFlow=1 时需要）
+type LeaveApprover struct {
+	UserWid  string `json:"userWid"`
+	UserId   string `json:"userId"`
+	UserName string `json:"userName"`
+}
+
+// LeaveItem 待销假记录（列表展示 + 销假表单所需开关/规定位置）
+type LeaveItem struct {
+	ID         string `json:"id"`         // 请假记录 ID
+	LeaveType  string `json:"leaveType"`  // 请假类型名称（如 事假/病假）
+	Reason     string `json:"reason"`     // 请假原因
+	CreateTime string `json:"createTime"` // 请假提交时间
+	ActEndTime string `json:"actEndTime"` // 预计结束时间
+	Status     string `json:"status"`     // 系统请假状态码（4=已完成，已过滤）
+	// 状态文案（新套有明确文案映射；旧套为空，前端回退本地映射）
+	StatusText string `json:"statusText,omitempty"`
+	// 学校规定的销假位置（详情 reportPlaces）。有值时前端展示可选列表并预填经纬度；
+	// 无值时提示用户手动填写
+	ReportPlaces []LeaveReportPlace `json:"reportPlaces"`
+	// 销假是否需要选择审批人（leaveType.reportApplyFlow=1）
+	ReportApplyFlow bool `json:"reportApplyFlow"`
+	// 销假是否允许上传图片（leaveType.enableAttach=1）
+	EnableAttach bool `json:"enableAttach"`
+}
+
+// LeaveDetail 请假详情（提交销假所需字段）
+type LeaveDetail struct {
+	ReportID        string // datas.detail.id，提交表单的 id 字段
+	LeaveType       string // datas.leaveType.name
+	LeaveCode       string // datas.leaveType.code，提交表单 leaveType 字段（接口返回为数字，统一转纯文本）
+	LeaveCodeNum    int    // datas.leaveType.code 数字形式（obtainApproveFlow 请求用）
+	StartTime       string // datas.detail.startDate（审批流请求用，提交前补秒）
+	EndTime         string // datas.detail.endDate
+	ReportApplyFlow bool   // 销假需要选择审批人
+	EnableAttach    bool   // 销假允许上传图片
+	ReportPlaces    []LeaveReportPlace
+}
+
+// leaveAnyStr 将 interface{} 值转为纯文本字符串（数字类型避免科学计数法）
+func leaveAnyStr(v interface{}) string {
+	if v == nil {
+		return ""
+	}
+	switch t := v.(type) {
+	case string:
+		return t
+	case float64:
+		return strconv.FormatFloat(t, 'f', -1, 64)
+	case json.Number:
+		return t.String()
+	case bool:
+		return strconv.FormatBool(t)
+	default:
+		return fmt.Sprintf("%v", v)
+	}
+}
+
+// leaveAnyBool 将 interface{} 值转为布尔（兼容数字/字符串/布尔三种返回风格）
+func leaveAnyBool(v interface{}) bool {
+	switch t := v.(type) {
+	case bool:
+		return t
+	case float64:
+		return t != 0
+	case json.Number:
+		n, _ := t.Int64()
+		return n != 0
+	case string:
+		return t == "1" || strings.EqualFold(t, "true")
+	default:
+		return false
+	}
+}
+
+// leaveAnyInt 将 interface{} 值转为整数（兼容数字/字符串两种返回风格）
+func leaveAnyInt(v interface{}) int {
+	switch t := v.(type) {
+	case float64:
+		return int(t)
+	case json.Number:
+		n, _ := t.Int64()
+		return int(n)
+	case string:
+		n, _ := strconv.Atoi(strings.TrimSpace(t))
+		return n
+	case bool:
+		if t {
+			return 1
+		}
+		return 0
+	default:
+		return 0
+	}
+}
+
+// leaveMapStr 从 map 中取字符串值
+func leaveMapStr(m map[string]interface{}, key string) string {
+	if m == nil {
+		return ""
+	}
+	return leaveAnyStr(m[key])
+}
+
+// leaveTimeWithSeconds 将 "2025-10-24 20:45" 补秒为审批流接口要求的 "2025-10-24 20:45:00"
+func leaveTimeWithSeconds(t string) string {
+	t = strings.TrimSpace(t)
+	if len(t) == 16 { // yyyy-MM-dd HH:mm
+		return t + ":00"
+	}
+	return t
+}
+
+// leavePost 通用 POST 请求（带移动端 UA 与 Cookie），返回响应 body；
+// extension 非空时额外携带 Cpdaily-Extension 签名头（销假提交用）
+func leavePost(cookieMap map[string]string, url string, body interface{}, extension string) ([]byte, error) {
+	client := newTaskClient()
+	req := client.R().
+		SetHeader("User-Agent", "Mozilla/5.0 (Linux; Android 15; Redmi Note 8 Pro) AppleWebKit/537.36 (KHTML, like Gecko) Version/4.0 Chrome/131.0.6778.81 Mobile Safari/537.36 cpdaily/9.9.6 wisedu/9.9.6").
+		SetHeader("CpdailyClientType", "CPDAILY").
+		SetHeader("Content-Type", "application/json; charset=UTF-8").
+		SetHeader("Cookie", cookiesToStr(cookieMap))
+	if extension != "" {
+		req = req.SetHeader("Cpdaily-Extension", extension)
+	}
+	resp, err := req.SetBody(body).Post(url)
+	if err != nil {
+		return nil, err
+	}
+	defer resp.RawBody().Close()
+	return io.ReadAll(resp.RawBody())
+}
+
+// FetchLeaveList 获取今日校园待销假列表。
+// 过滤已完成（status=4）的记录；每条记录附带详情中的规定销假位置（reportPlaces）
+// 与开关（reportApplyFlow/enableAttach）。
+// 详情获取失败不阻塞列表展示（仅视为无规定位置、无开关）。
+func FetchLeaveList(cookieMap map[string]string, host string) ([]LeaveItem, error) {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/stu/listOther", map[string]interface{}{
+		"pageNumber":   1,
+		"pageSize":     20,
+		"needApproval": 1,
+	}, "")
+	if err != nil {
+		return nil, fmt.Errorf("获取待销假列表失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		ErrCode int         `json:"errCode"`
+		Message string      `json:"message"`
+		Datas   struct {
+			Rows []map[string]interface{} `json:"rows"`
+		} `json:"datas"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("解析待销假列表失败: %w (body: %.200s)", err, string(body))
+	}
+	if result.ErrCode != 0 {
+		return nil, fmt.Errorf("获取待销假列表错误(%d): %s", result.ErrCode, result.Message)
+	}
+	code, _ := result.Code.Int64()
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+
+	list := make([]LeaveItem, 0, len(result.Datas.Rows))
+	for _, row := range result.Datas.Rows {
+		status := leaveMapStr(row, "status")
+		if status == "4" { // 已完成，无需销假
+			continue
+		}
+		id := leaveMapStr(row, "id")
+		if id == "" {
+			continue
+		}
+		item := LeaveItem{
+			ID:         id,
+			LeaveType:  leaveMapStr(row, "leaveType"),
+			Reason:     leaveMapStr(row, "leaveReason"),
+			CreateTime: leaveMapStr(row, "createTime"),
+			ActEndTime: leaveMapStr(row, "actEndTime"),
+			Status:     status,
+		}
+		// 补充规定销假位置与开关（来自详情 reportPlaces / leaveType）
+		if d, err := FetchLeaveDetail(cookieMap, host, id); err == nil {
+			item.ReportPlaces = d.ReportPlaces
+			item.ReportApplyFlow = d.ReportApplyFlow
+			item.EnableAttach = d.EnableAttach
+		} else {
+			slog.Warn("获取请假详情失败，规定销假位置与开关视为空", "leaveId", id, "error", err)
+		}
+		list = append(list, item)
+	}
+	return list, nil
+}
+
+// FetchLeaveDetail 获取请假详情（提交销假所需字段 + 规定销假位置与开关）
+func FetchLeaveDetail(cookieMap map[string]string, host, leaveID string) (*LeaveDetail, error) {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/stu/detailOther", map[string]interface{}{
+		"id":           leaveID,
+		"needApproval": 1,
+		"uaIsCpadaily": "true",
+	}, "")
+	if err != nil {
+		return nil, fmt.Errorf("获取请假详情失败: %w", err)
+	}
+
+	// 注意：leaveType.code 真实返回为数字（如 3/12），必须用 interface{} 承接
+	var result struct {
+		Code    json.Number `json:"code"`
+		ErrCode int         `json:"errCode"`
+		Message string      `json:"message"`
+		Datas   struct {
+			Detail struct {
+				ID        string `json:"id"`
+				StartDate string `json:"startDate"`
+				EndDate   string `json:"endDate"`
+			} `json:"detail"`
+			LeaveType struct {
+				Code            interface{} `json:"code"`
+				Name            string      `json:"name"`
+				ReportApplyFlow interface{} `json:"reportApplyFlow"`
+				EnableAttach    interface{} `json:"enableAttach"`
+			} `json:"leaveType"`
+			ReportPlaces []struct {
+				Wid       interface{} `json:"wid"`
+				Address   string      `json:"address"`
+				Longitude interface{} `json:"longitude"`
+				Latitude  interface{} `json:"latitude"`
+				Radius    interface{} `json:"radius"`
+				CounName  string      `json:"counName"`
+			} `json:"reportPlaces"`
+		} `json:"datas"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("解析请假详情失败: %w (body: %.200s)", err, string(body))
+	}
+	if result.ErrCode != 0 {
+		return nil, fmt.Errorf("获取请假详情错误(%d): %s", result.ErrCode, result.Message)
+	}
+	code, _ := result.Code.Int64()
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+	if result.Datas.Detail.ID == "" {
+		return nil, fmt.Errorf("没有获取到请假详情信息")
+	}
+
+	codeStr := leaveAnyStr(result.Datas.LeaveType.Code)
+	codeNum, _ := strconv.Atoi(codeStr)
+	d := &LeaveDetail{
+		ReportID:        result.Datas.Detail.ID,
+		LeaveType:       result.Datas.LeaveType.Name,
+		LeaveCode:       codeStr,
+		LeaveCodeNum:    codeNum,
+		StartTime:       result.Datas.Detail.StartDate,
+		EndTime:         result.Datas.Detail.EndDate,
+		ReportApplyFlow: leaveAnyBool(result.Datas.LeaveType.ReportApplyFlow),
+		EnableAttach:    leaveAnyBool(result.Datas.LeaveType.EnableAttach),
+	}
+	for _, p := range result.Datas.ReportPlaces {
+		d.ReportPlaces = append(d.ReportPlaces, LeaveReportPlace{
+			Wid:       leaveAnyStr(p.Wid),
+			Address:   p.Address,
+			Longitude: leaveAnyStr(p.Longitude),
+			Latitude:  leaveAnyStr(p.Latitude),
+			Radius:    leaveAnyStr(p.Radius),
+			CounName:  p.CounName,
+		})
+	}
+	return d, nil
+}
+
+// FetchReportApprovers 获取销假可选审批人（leaveType.reportApplyFlow=1 的请假类型使用）。
+// 复用请假申请的审批流接口；时间必须精确到秒（yyyy-MM-dd HH:mm:ss）。
+// 优先取 datas.approvers（首节点可选审批人），为空时兜底展开 approveNodes 中的全部审批人。
+func FetchReportApprovers(cookieMap map[string]string, host string, leaveCodeNum int, startTime, endTime string) ([]LeaveApprover, error) {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/stu/obtainApproveFlow", map[string]interface{}{
+		"leaveType": leaveCodeNum,
+		"startTime": leaveTimeWithSeconds(startTime),
+		"endTime":   leaveTimeWithSeconds(endTime),
+	}, "")
+	if err != nil {
+		return nil, fmt.Errorf("获取销假审批人失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+		Datas   struct {
+			Approvers []LeaveApprover `json:"approvers"`
+			ApproveNodes []struct {
+				ApproveNode []struct {
+					NodeName  string          `json:"nodeName"`
+					Approvers []LeaveApprover `json:"approvers"`
+				} `json:"approveNode"`
+			} `json:"approveNodes"`
+		} `json:"datas"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("解析销假审批人失败: %w (body: %.200s)", err, string(body))
+	}
+	code, _ := result.Code.Int64()
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+
+	list := make([]LeaveApprover, 0, len(result.Datas.Approvers))
+	seen := make(map[string]bool)
+	for _, a := range result.Datas.Approvers {
+		if a.UserWid == "" || seen[a.UserWid] {
+			continue
+		}
+		seen[a.UserWid] = true
+		list = append(list, a)
+	}
+	if len(list) == 0 {
+		for _, n := range result.Datas.ApproveNodes {
+			for _, node := range n.ApproveNode {
+				for _, a := range node.Approvers {
+					if a.UserWid == "" || seen[a.UserWid] {
+						continue
+					}
+					seen[a.UserWid] = true
+					list = append(list, a)
+				}
+			}
+		}
+	}
+	return list, nil
+}
+
+// BuildLeaveReportForm 构造销假提交表单（bodyString 内容）。
+// reportLocation 为用户选择/填写的销假地址，为空时兜底第一个规定销假位置地址；
+// approverWid 为所选审批人（reportApplyFlow=1 时必填，其余传空）。
+func BuildLeaveReportForm(d *LeaveDetail, address, imageUrl, approverWid string) map[string]interface{} {
+	if address == "" && len(d.ReportPlaces) > 0 {
+		address = d.ReportPlaces[0].Address
+	}
+	form := map[string]interface{}{
+		"id":                 d.ReportID,
+		"needApproval":       1,
+		"leaveType":          d.LeaveCode,
+		"reportLocation":     address,
+		"approverWid":        approverWid,
+		"reportApplyExplain": nil,
+		"uaIsCpadaily":       true,
+	}
+	if imageUrl != "" {
+		form["reportAttach"] = []map[string]interface{}{
+			{"type": 1, "url": imageUrl},
+		}
+	} else {
+		form["reportAttach"] = []interface{}{}
+	}
+	return form
+}
+
+// SubmitLeaveReport 提交销假（bodyString 加密 + Cpdaily-Extension 签名，与签到提交同构）
+func SubmitLeaveReport(cookieMap map[string]string, host string, form map[string]interface{}, lon, lat, deviceId, username string) error {
+	bodyString := GetBodyString(form)
+	extensionString := GetExtensionString(lat, lon, deviceId, username)
+
+	submitData := map[string]interface{}{
+		"lon":           lon,
+		"version":       "first_v4",
+		"calVersion":    "first_v4",
+		"deviceId":      deviceId,
+		"systemName":    "android",
+		"bodyString":    bodyString,
+		"lat":           lat,
+		"systemVersion": "15",
+		"appVersion":    "9.9.6",
+		"model":         "cpdaily",
+	}
+	submitData["userId"] = username
+	submitData["sign"] = GetSubmitSign(submitData)
+
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/report", submitData, extensionString)
+	if err != nil {
+		return fmt.Errorf("提交销假请求失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return fmt.Errorf("解析销假响应失败: %w, body: %s", err, string(body))
+	}
+	code, _ := result.Code.Int64()
+	slog.Info("leave/report 响应", "code", result.Code.String(), "message", result.Message, "body", string(body))
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return fmt.Errorf("%s", msg)
+	}
+	return nil
+}

backed/internal/service/cpdaily/leave_apply.go

@@ -0,0 +1,348 @@
+package cpdaily
+
+import (
+	"encoding/json"
+	"fmt"
+	"log/slog"
+	"strconv"
+)
+
+// 请假申请功能（与销假同属 wec-counselor-leave-apps 模块）：
+//
+//	请假类型列表：POST {host}/wec-counselor-leave-apps/leave/queryLeaveTypes
+//	类型详细配置：POST {host}/wec-counselor-leave-apps/leave/stu/queryLeaveTypeCfg
+//	可请假检查：  POST {host}/wec-counselor-leave-apps/leave/stu/checkOnceLeave
+//	审批人列表：  POST {host}/wec-counselor-leave-apps/leave/stu/obtainApproveFlow
+//	提交请假：    POST {host}/wec-counselor-leave-apps/leave/apply
+//
+// 注意：真实接口中 queryLeaveTypes 只返回基础信息（needApproval/enableAttach 等
+// 均为 null），权威开关全部来自 queryLeaveTypeCfg，故列表接口会把两者合并后返回。
+
+// LeaveType 请假类型（queryLeaveTypes + queryLeaveTypeCfg 合并后的完整信息）
+type LeaveType struct {
+	Code                  int    `json:"code"`                  // 类型编码（提交与查询都用它）
+	Name                  string `json:"name"`                  // 类型名称
+	MustOut               int    `json:"mustOut"`               // 1=必须离校（离校开关强制打开且不可改）
+	NeedApproval          int    `json:"needApproval"`          // 1=需要选择审批人
+	EnableAttach          int    `json:"enableAttach"`          // 1=允许上传图片附件
+	ReasonWordLimit       int    `json:"reasonWordLimit"`       // 请假原因最少字数
+	AttachmentNumberLimit int    `json:"attachmentNumberLimit"` // 附件数量上限
+	ChooseAttendance      int    `json:"chooseAttendance"`      // 1=需要打卡相关核验（透传）
+	DisableTime           int    `json:"disableTime"`           // 1=当前类型不可用
+	LimitDay              int    `json:"limitDay"`              // 单次最长可请假天数（0=不限）
+}
+
+// CheckOnceLeave 检查是否允许请假（学校可能配置同一时间仅一条请假单等限制）
+func CheckOnceLeave(cookieMap map[string]string, host string) error {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/stu/checkOnceLeave", map[string]interface{}{}, "")
+	if err != nil {
+		return fmt.Errorf("检查请假资格失败: %w", err)
+	}
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return fmt.Errorf("解析请假资格响应失败: %w (body: %.200s)", err, string(body))
+	}
+	code, _ := result.Code.Int64()
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "当前不可请假"
+		}
+		return fmt.Errorf("%s", msg)
+	}
+	return nil
+}
+
+// FetchLeaveTypes 获取请假类型列表（已合并 queryLeaveTypeCfg 的权威开关）。
+// 单个类型的 cfg 查询失败不阻塞整体列表（该类型保留基础信息，开关取保守默认值）。
+func FetchLeaveTypes(cookieMap map[string]string, host string) ([]LeaveType, error) {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/queryLeaveTypes", map[string]interface{}{}, "")
+	if err != nil {
+		return nil, fmt.Errorf("获取请假类型失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+		Datas   struct {
+			LeaveType []struct {
+				Code                  interface{} `json:"code"`
+				Name                  string      `json:"name"`
+				MustOut               interface{} `json:"mustOut"`
+				ReasonWordLimit       interface{} `json:"reasonWordLimit"`
+				AttachmentNumberLimit interface{} `json:"attachmentNumberLimit"`
+			} `json:"leaveType"`
+		} `json:"datas"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("解析请假类型失败: %w (body: %.200s)", err, string(body))
+	}
+	code, _ := result.Code.Int64()
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+
+	list := make([]LeaveType, 0, len(result.Datas.LeaveType))
+	for _, lt := range result.Datas.LeaveType {
+		codeNum, _ := strconv.Atoi(leaveAnyStr(lt.Code))
+		item := LeaveType{
+			Code:                  codeNum,
+			Name:                  lt.Name,
+			MustOut:               leaveAnyInt(lt.MustOut),
+			ReasonWordLimit:       leaveAnyInt(lt.ReasonWordLimit),
+			AttachmentNumberLimit: leaveAnyInt(lt.AttachmentNumberLimit),
+		}
+		if cfg, err := FetchLeaveTypeCfg(cookieMap, host, codeNum); err == nil {
+			item.MustOut = cfg.MustOut
+			item.NeedApproval = cfg.NeedApproval
+			item.EnableAttach = cfg.EnableAttach
+			item.ReasonWordLimit = cfg.ReasonWordLimit
+			item.AttachmentNumberLimit = cfg.AttachmentNumberLimit
+			item.ChooseAttendance = cfg.ChooseAttendance
+			item.DisableTime = cfg.DisableTime
+			item.LimitDay = cfg.LimitDay
+			if cfg.Name != "" {
+				item.Name = cfg.Name
+			}
+		} else {
+			slog.Warn("获取请假类型配置失败，使用基础信息", "code", codeNum, "error", err)
+		}
+		list = append(list, item)
+	}
+	return list, nil
+}
+
+// FetchLeaveTypeCfg 获取请假类型详细配置（needApproval/enableAttach 等权威开关）
+func FetchLeaveTypeCfg(cookieMap map[string]string, host string, code int) (*LeaveType, error) {
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/stu/queryLeaveTypeCfg", map[string]interface{}{
+		"code": code,
+	}, "")
+	if err != nil {
+		return nil, fmt.Errorf("获取请假类型配置失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+		Datas   struct {
+			Code                  interface{} `json:"code"`
+			Name                  string      `json:"name"`
+			MustOut               interface{} `json:"mustOut"`
+			NeedApproval          interface{} `json:"needApproval"`
+			EnableAttach          interface{} `json:"enableAttach"`
+			ReasonWordLimit       interface{} `json:"reasonWordLimit"`
+			AttachmentNumberLimit interface{} `json:"attachmentNumberLimit"`
+			ChooseAttendance      interface{} `json:"chooseAttendance"`
+			DisableTime           interface{} `json:"disableTime"`
+			LimitDay              interface{} `json:"limitDay"`
+		} `json:"datas"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("解析请假类型配置失败: %w (body: %.200s)", err, string(body))
+	}
+	codeVal, _ := result.Code.Int64()
+	if codeVal != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+
+	return &LeaveType{
+		Code:                  leaveAnyInt(result.Datas.Code),
+		Name:                  result.Datas.Name,
+		MustOut:               leaveAnyInt(result.Datas.MustOut),
+		NeedApproval:          leaveAnyInt(result.Datas.NeedApproval),
+		EnableAttach:          leaveAnyInt(result.Datas.EnableAttach),
+		ReasonWordLimit:       leaveAnyInt(result.Datas.ReasonWordLimit),
+		AttachmentNumberLimit: leaveAnyInt(result.Datas.AttachmentNumberLimit),
+		ChooseAttendance:      leaveAnyInt(result.Datas.ChooseAttendance),
+		DisableTime:           leaveAnyInt(result.Datas.DisableTime),
+		LimitDay:              leaveAnyInt(result.Datas.LimitDay),
+	}, nil
+}
+
+// LeaveApplyParams 请假申请提交参数
+type LeaveApplyParams struct {
+	LeaveType     int             // 类型编码
+	StartTime     string          // yyyy-MM-dd HH:mm:ss
+	EndTime       string          // yyyy-MM-dd HH:mm:ss
+	LeaveReason   string          // 请假原因
+	OutStatus     bool            // 是否离校
+	UrgencyMobile string          // 紧急联系人手机号（离校必填）
+	Address       string          // 目的地（离校必填，如 xx省/xx市/xx区）
+	DetailAddress string          // 详细地址（离校必填）
+	Longitude     string          // 定位经度
+	Latitude      string          // 定位纬度
+	LocationAddr  string          // 定位地址
+	ImageURLs     []string        // 附件图片 URL 列表（可选，最多 4 张且不超学校上限）
+	ApproverWid   string          // 审批人 userWid（needApproval=1 且学校配置了候选审批人时必填；候选为空可不选）
+	ApproverId    string          // 审批人 userId
+	ApproverName  string          // 审批人姓名
+	CcUsers       []LeaveApprover // 抄送人（非必填；候选取自审批人列表）
+}
+
+// LeaveMaxAttachCount 附件数量上限：学校配置为准，但产品上限 4 张。
+// limit<=0（学校未配置）按 4；limit>4 收敛为 4；否则取学校值。
+func LeaveMaxAttachCount(schoolLimit int) int {
+	if schoolLimit <= 0 || schoolLimit > 4 {
+		return 4
+	}
+	return schoolLimit
+}
+
+// BuildLeaveCcInfo 构造抄送人信息（ccInfo）。
+// 官方结构：{totalSize, teachers:[], students:[]}，人员含 personType（0=老师 1=学生）。
+// 审批人接口不返回 personType，按 userId 是否纯数字推断（学号纯数字，教师工号常含字母）。
+func BuildLeaveCcInfo(users []LeaveApprover) map[string]interface{} {
+	teachers := make([]interface{}, 0, len(users))
+	students := make([]interface{}, 0, len(users))
+	for _, u := range users {
+		if u.UserWid == "" {
+			continue
+		}
+		personType := 1 // 默认学生
+		if u.UserId == "" {
+			personType = 0
+		} else {
+			for _, ch := range u.UserId {
+				if ch < '0' || ch > '9' {
+					personType = 0 // 含非数字字符 → 教师
+					break
+				}
+			}
+		}
+		person := map[string]interface{}{
+			"userWid":     u.UserWid,
+			"userId":      u.UserId,
+			"userName":    u.UserName,
+			"name2Id":     u.UserName + "/" + u.UserId,
+			"personType":  personType,
+			"dept":        nil,
+			"sex":         nil,
+			"teacherName": u.UserName,
+		}
+		if personType == 0 {
+			teachers = append(teachers, person)
+		} else {
+			students = append(students, person)
+		}
+	}
+	return map[string]interface{}{
+		"totalSize": len(teachers) + len(students),
+		"teachers":  teachers,
+		"students":  students,
+	}
+}
+
+// BuildLeaveApplyForm 构造请假申请表单（/leave/apply 的明文 JSON body，
+// 与销假的 bodyString 加密不同：该接口只携带 Cpdaily-Extension 头）。
+func BuildLeaveApplyForm(p LeaveApplyParams, deviceId, systemVersion, appVersion string) map[string]interface{} {
+	urgencyMobile := p.UrgencyMobile
+	address := p.Address
+	detailAddress := p.DetailAddress
+	destination := ""
+	if p.OutStatus {
+		destination = address
+		if detailAddress != "" {
+			if destination != "" {
+				destination += "/"
+			}
+			destination += detailAddress
+		}
+	} else {
+		urgencyMobile = ""
+		address = ""
+		detailAddress = ""
+	}
+
+	form := map[string]interface{}{
+		"leaveType":            p.LeaveType,
+		"startTime":            p.StartTime,
+		"endTime":              p.EndTime,
+		"urgencyMobile":        urgencyMobile,
+		"leaveReason":          p.LeaveReason,
+		"isAttendance":         nil,
+		"outStatus":            p.OutStatus,
+		"address":              address,
+		"detailAddress":        detailAddress,
+		"destination":          destination,
+		"holidayAutoDefineVos": []interface{}{},
+		"appVersion":           appVersion,
+		"deviceId":             deviceId,
+		"ccInfo":               BuildLeaveCcInfo(p.CcUsers),
+		"cheatType":            nil,
+		"source":               1,
+		"location": map[string]interface{}{
+			"deviceId":      deviceId,
+			"systemName":    "Android",
+			"systemVersion": systemVersion,
+			"model":         "cpdaily",
+			"address":       p.LocationAddr,
+			"latitude":      p.Latitude,
+			"longitude":     p.Longitude,
+		},
+		"locationType":      0,
+		"disclaimers":       "本人承诺填写的信息真实有效，并对本次提交请假申请的信息真实性负责。",
+		"uaIsCpadaily":      "true",
+		"leaveApplyExplain": nil,
+	}
+	if p.ApproverWid != "" {
+		form["approverWid"] = p.ApproverWid
+		form["approverId"] = p.ApproverId
+		form["approverName"] = p.ApproverName
+	}
+	if len(p.ImageURLs) > 0 {
+		attachs := make([]map[string]interface{}, 0, len(p.ImageURLs))
+		for _, u := range p.ImageURLs {
+			if u == "" {
+				continue
+			}
+			attachs = append(attachs, map[string]interface{}{"type": 1, "url": u})
+		}
+		if len(attachs) > 0 {
+			form["applyAttach"] = attachs
+		} else {
+			form["applyAttach"] = []interface{}{}
+		}
+	} else {
+		form["applyAttach"] = []interface{}{}
+	}
+	return form
+}
+
+// SubmitLeaveApply 提交请假申请（明文 JSON body + Cpdaily-Extension 头）
+func SubmitLeaveApply(cookieMap map[string]string, host string, form map[string]interface{}, lon, lat, deviceId, username string) error {
+	extensionString := GetExtensionString(lat, lon, deviceId, username)
+
+	body, err := leavePost(cookieMap, host+leaveAPIBase+"/apply", form, extensionString)
+	if err != nil {
+		return fmt.Errorf("提交请假请求失败: %w", err)
+	}
+
+	var result struct {
+		Code    json.Number `json:"code"`
+		Message string      `json:"message"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return fmt.Errorf("解析请假响应失败: %w, body: %s", err, string(body))
+	}
+	code, _ := result.Code.Int64()
+	slog.Info("leave/apply 响应", "code", result.Code.String(), "message", result.Message)
+	if code != 0 {
+		msg := result.Message
+		if msg == "" {
+			msg = "未知错误"
+		}
+		return fmt.Errorf("%s", msg)
+	}
+	return nil
+}

backed/internal/service/cpdaily/leave_apply_test.go

@@ -0,0 +1,277 @@
+package cpdaily
+
+import (
+	"encoding/json"
+	"net/http"
+	"net/http/httptest"
+	"testing"
+)
+
+// mock 请假申请接口：queryLeaveTypes 返回基础信息（开关全 null，复刻真实返回），
+// queryLeaveTypeCfg 返回权威开关，checkOnceLeave 返回成功。
+func newLeaveApplyMockServer(t *testing.T) *httptest.Server {
+	t.Helper()
+	return httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		w.Header().Set("Content-Type", "application/json")
+		switch r.URL.Path {
+		case "/wec-counselor-leave-apps/leave/queryLeaveTypes":
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{
+				"code": "0",
+				"datas": map[string]interface{}{
+					"leaveType": []map[string]interface{}{
+						{
+							"id": "4443", "code": 3, "name": "外出申请（省内）", "mustOut": 1,
+							"needApproval": nil, "enableAttach": nil, "reasonWordLimit": 10, "attachmentNumberLimit": 4,
+						},
+						{
+							"id": "1225", "code": 1, "name": "事假", "mustOut": 0,
+							"needApproval": nil, "enableAttach": nil, "reasonWordLimit": 10, "attachmentNumberLimit": 4,
+						},
+					},
+				},
+			})
+		case "/wec-counselor-leave-apps/leave/stu/queryLeaveTypeCfg":
+			var body map[string]interface{}
+			_ = json.NewDecoder(r.Body).Decode(&body)
+			code := leaveAnyInt(body["code"])
+			// code=3：需要审批人 + 允许附件；code=1：均不需要（复刻实测差异）
+			needApproval, enableAttach := 0, 0
+			if code == 3 {
+				needApproval, enableAttach = 1, 1
+			}
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{
+				"code": "0",
+				"datas": map[string]interface{}{
+					"wid": "4443", "code": code, "name": "外出申请（省内）",
+					"mustOut": 1, "needApproval": needApproval, "enableAttach": enableAttach,
+					"reasonWordLimit": 10, "attachmentNumberLimit": 4, "chooseAttendance": 0,
+					"disableTime": 0, "limitDay": 90,
+				},
+			})
+		case "/wec-counselor-leave-apps/leave/stu/checkOnceLeave":
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{"code": "0", "message": "SUCCESS", "datas": nil})
+		case "/wec-counselor-leave-apps/leave/apply":
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{"code": "0", "message": "SUCCESS"})
+		default:
+			http.NotFound(w, r)
+		}
+	}))
+}
+
+func TestFetchLeaveTypesMergesTypeCfg(t *testing.T) {
+	srv := newLeaveApplyMockServer(t)
+	defer srv.Close()
+
+	list, err := FetchLeaveTypes(map[string]string{}, srv.URL)
+	if err != nil {
+		t.Fatalf("FetchLeaveTypes 返回错误: %v", err)
+	}
+	if len(list) != 2 {
+		t.Fatalf("期望 2 个请假类型，实际 %d 个", len(list))
+	}
+	// code=3：权威开关来自 cfg（needApproval=1 / enableAttach=1）
+	var out LeaveType
+	var personal LeaveType
+	for _, lt := range list {
+		if lt.Code == 3 {
+			out = lt
+		}
+		if lt.Code == 1 {
+			personal = lt
+		}
+	}
+	if out.Name != "外出申请（省内）" || out.NeedApproval != 1 || out.EnableAttach != 1 || out.MustOut != 1 {
+		t.Errorf("类型合并结果错误: %+v", out)
+	}
+	if out.ReasonWordLimit != 10 || out.LimitDay != 90 {
+		t.Errorf("字数/天数限制错误: %+v", out)
+	}
+	if personal.NeedApproval != 0 || personal.EnableAttach != 0 {
+		t.Errorf("事假不应需要审批/附件: %+v", personal)
+	}
+}
+
+func TestCheckOnceLeave(t *testing.T) {
+	srv := newLeaveApplyMockServer(t)
+	defer srv.Close()
+
+	if err := CheckOnceLeave(map[string]string{}, srv.URL); err != nil {
+		t.Errorf("checkOnceLeave 应通过: %v", err)
+	}
+}
+
+func TestBuildLeaveApplyForm(t *testing.T) {
+	// 离校：紧急联系人/目的地/详细地址均保留，destination 由地址拼接
+	p := LeaveApplyParams{
+		LeaveType:     3,
+		StartTime:     "2026-09-15 08:00:00",
+		EndTime:       "2026-09-16 20:00:00",
+		LeaveReason:   "回家处理家庭事务",
+		OutStatus:     true,
+		UrgencyMobile: "13800000000",
+		Address:       "福建省/厦门市/思明区",
+		DetailAddress: "某某路 1 号",
+		Longitude:     "118.1",
+		Latitude:      "24.6",
+		LocationAddr:  "福建省厦门市思明区",
+		ImageURLs:     []string{"https://obs.example.com/a.jpg", "https://obs.example.com/b.jpg"},
+		ApproverWid:   "93458825",
+		ApproverId:    "20220109",
+		ApproverName:  "罗亭",
+	}
+	form := BuildLeaveApplyForm(p, "device-1", "15", "9.9.6")
+
+	if form["leaveType"] != 3 || form["startTime"] != "2026-09-15 08:00:00" || form["outStatus"] != true {
+		t.Errorf("基础字段错误: %+v", form)
+	}
+	if form["destination"] != "福建省/厦门市/思明区/某某路 1 号" {
+		t.Errorf("destination 拼接错误: %v", form["destination"])
+	}
+	if form["approverWid"] != "93458825" || form["approverId"] != "20220109" || form["approverName"] != "罗亭" {
+		t.Errorf("审批人字段错误: %v/%v/%v", form["approverWid"], form["approverId"], form["approverName"])
+	}
+	attach, ok := form["applyAttach"].([]map[string]interface{})
+	if !ok || len(attach) != 2 || attach[0]["url"] != "https://obs.example.com/a.jpg" || attach[1]["url"] != "https://obs.example.com/b.jpg" {
+		t.Errorf("多附件结构错误: %v", form["applyAttach"])
+	}
+	if attach[0]["type"] != 1 || attach[1]["type"] != 1 {
+		t.Errorf("附件 type 应为 1: %v", attach)
+	}
+	loc, ok := form["location"].(map[string]interface{})
+	if !ok || loc["longitude"] != "118.1" || loc["latitude"] != "24.6" || loc["address"] != "福建省厦门市思明区" {
+		t.Errorf("location 结构错误: %v", form["location"])
+	}
+
+	// 不离校：紧急联系人/地址字段清空、destination 为空、无审批人/无附件
+	p2 := LeaveApplyParams{
+		LeaveType:     1,
+		StartTime:     "2026-09-15 08:00:00",
+		EndTime:       "2026-09-15 18:00:00",
+		LeaveReason:   "身体不适需休息",
+		OutStatus:     false,
+		UrgencyMobile: "13800000000", // 故意传入，应被清空
+		Address:       "福建省/厦门市",
+		DetailAddress: "某某路",
+		Longitude:     "118.1",
+		Latitude:      "24.6",
+		LocationAddr:  "校内",
+	}
+	form2 := BuildLeaveApplyForm(p2, "device-1", "15", "9.9.6")
+	if form2["urgencyMobile"] != "" || form2["address"] != "" || form2["detailAddress"] != "" {
+		t.Errorf("不离校时地址字段应清空: %v/%v/%v", form2["urgencyMobile"], form2["address"], form2["detailAddress"])
+	}
+	if form2["destination"] != "" {
+		t.Errorf("不离校时 destination 应为空: %v", form2["destination"])
+	}
+	if _, ok := form2["approverWid"]; ok {
+		t.Errorf("未选审批人时不应携带 approverWid")
+	}
+	if attach, ok := form2["applyAttach"].([]interface{}); !ok || len(attach) != 0 {
+		t.Errorf("无附件时 applyAttach 应为空数组: %v", form2["applyAttach"])
+	}
+	// 无抄送人：ccInfo 仍必须存在且为空结构
+	cc, ok := form2["ccInfo"].(map[string]interface{})
+	if !ok || cc["totalSize"] != 0 {
+		t.Errorf("无抄送人时 ccInfo 应为空结构: %v", form2["ccInfo"])
+	}
+}
+
+func TestBuildLeaveCcInfo(t *testing.T) {
+	// 学生（纯数字 userId）+ 教师（含字母 userId）分组
+	users := []LeaveApprover{
+		{UserWid: "92274797", UserId: "02727", UserName: "王欣然"},    // 纯数字 → students
+		{UserWid: "915560902", UserId: "kjxy0003", UserName: "杨瑚"}, // 含字母 → teachers
+	}
+	cc := BuildLeaveCcInfo(users)
+	if cc["totalSize"] != 2 {
+		t.Errorf("totalSize 应为 2，实际 %v", cc["totalSize"])
+	}
+	students, _ := cc["students"].([]interface{})
+	teachers, _ := cc["teachers"].([]interface{})
+	if len(students) != 1 || len(teachers) != 1 {
+		t.Fatalf("分组错误: students=%d teachers=%d", len(students), len(teachers))
+	}
+	st, _ := students[0].(map[string]interface{})
+	if st["userWid"] != "92274797" || st["name2Id"] != "王欣然/02727" || st["personType"] != 1 {
+		t.Errorf("学生抄送人字段错误: %v", st)
+	}
+	tc, _ := teachers[0].(map[string]interface{})
+	if tc["userWid"] != "915560902" || tc["personType"] != 0 {
+		t.Errorf("教师抄送人字段错误: %v", tc)
+	}
+
+	// 空列表：结构完整但 totalSize=0
+	empty := BuildLeaveCcInfo(nil)
+	if empty["totalSize"] != 0 {
+		t.Errorf("空抄送人 totalSize 应为 0: %v", empty["totalSize"])
+	}
+	if arr, ok := empty["teachers"].([]interface{}); !ok || len(arr) != 0 {
+		t.Errorf("空抄送人 teachers 应为空数组: %v", empty["teachers"])
+	}
+
+	// 提交表单携带抄送人
+	form := BuildLeaveApplyForm(LeaveApplyParams{
+		LeaveType: 1, StartTime: "2026-09-15 08:00:00", EndTime: "2026-09-15 18:00:00",
+		LeaveReason: "身体不适需休息", Longitude: "118.1", Latitude: "24.6", LocationAddr: "校内",
+		CcUsers: users,
+	}, "device-1", "15", "9.9.6")
+	fcc, _ := form["ccInfo"].(map[string]interface{})
+	if fcc == nil || fcc["totalSize"] != 2 {
+		t.Errorf("表单 ccInfo 应包含 2 名抄送人: %v", form["ccInfo"])
+	}
+}
+
+func TestSubmitLeaveApply(t *testing.T) {
+	srv := newLeaveApplyMockServer(t)
+	defer srv.Close()
+
+	form := BuildLeaveApplyForm(LeaveApplyParams{
+		LeaveType: 1, StartTime: "2026-09-15 08:00:00", EndTime: "2026-09-15 18:00:00",
+		LeaveReason: "身体不适需休息", Longitude: "118.1", Latitude: "24.6", LocationAddr: "校内",
+	}, "device-1", "15", "9.9.6")
+
+	if err := SubmitLeaveApply(map[string]string{}, srv.URL, form, "118.1", "24.6", "device-1", "20251960205"); err != nil {
+		t.Errorf("SubmitLeaveApply 应成功: %v", err)
+	}
+}
+
+// TestLeaveMaxAttachCount 附件数量上限：学校未配置/超 4 张收敛为 4，否则取学校值
+func TestLeaveMaxAttachCount(t *testing.T) {
+	cases := []struct {
+		schoolLimit int
+		want        int
+	}{
+		{0, 4},  // 未配置
+		{-1, 4}, // 异常值
+		{2, 2},
+		{4, 4},
+		{9, 4}, // 超产品上限
+	}
+	for _, c := range cases {
+		if got := LeaveMaxAttachCount(c.schoolLimit); got != c.want {
+			t.Errorf("LeaveMaxAttachCount(%d) = %d, want %d", c.schoolLimit, got, c.want)
+		}
+	}
+}
+
+// TestBuildLeaveApplyFormEmptyAttachURLs 多图字段中的空串应被剔除，全空时仍输出空数组
+func TestBuildLeaveApplyFormEmptyAttachURLs(t *testing.T) {
+	form := BuildLeaveApplyForm(LeaveApplyParams{
+		LeaveType: 1, StartTime: "2026-09-15 08:00:00", EndTime: "2026-09-15 18:00:00",
+		LeaveReason: "身体不适需休息", Longitude: "118.1", Latitude: "24.6", LocationAddr: "校内",
+		ImageURLs: []string{"", "https://obs.example.com/only.jpg", ""},
+	}, "device-1", "15", "9.9.6")
+	attach, ok := form["applyAttach"].([]map[string]interface{})
+	if !ok || len(attach) != 1 || attach[0]["url"] != "https://obs.example.com/only.jpg" {
+		t.Errorf("空串应被剔除: %v", form["applyAttach"])
+	}
+
+	form2 := BuildLeaveApplyForm(LeaveApplyParams{
+		LeaveType: 1, StartTime: "2026-09-15 08:00:00", EndTime: "2026-09-15 18:00:00",
+		LeaveReason: "身体不适需休息", Longitude: "118.1", Latitude: "24.6", LocationAddr: "校内",
+		ImageURLs: []string{"", ""},
+	}, "device-1", "15", "9.9.6")
+	if attach2, ok := form2["applyAttach"].([]interface{}); !ok || len(attach2) != 0 {
+		t.Errorf("全空时应为空数组: %v", form2["applyAttach"])
+	}
+}

backed/internal/service/cpdaily/leave_new_test.go

@@ -0,0 +1,165 @@
+package cpdaily
+
+import (
+	"testing"
+)
+
+// TestLeaveNewObsKeyOf 验证 obsKey 推导（与官方前端 AA 函数一致）
+func TestLeaveNewObsKeyOf(t *testing.T) {
+	cases := []struct {
+		name string
+		url  string
+		want string
+	}{
+		{"普通路径", "https://counselor-cos-wecres.campusphere.net/counselor/leave/1020385267004784/attachment/abc.jpeg?sign=xxx", "/counselor/leave/1020385267004784/attachment/abc.jpeg"},
+		{"newBucket形态", "https://cdn.example.com/foo/newBucket/leave/abc.png", "newBucket/leave/abc.png"},
+		{"空URL", "", ""},
+	}
+	for _, c := range cases {
+		t.Run(c.name, func(t *testing.T) {
+			if got := LeaveNewObsKeyOf(c.url); got != c.want {
+				t.Errorf("LeaveNewObsKeyOf(%q) = %q, want %q", c.url, got, c.want)
+			}
+		})
+	}
+}
+
+// TestLeaveAppFlavorFromApps 验证应用列表 → 套件判定
+func TestLeaveNewCanReport(t *testing.T) {
+	cases := []struct {
+		status, reportMode string
+		want               bool
+	}{
+		{"3", "1", true},
+		{"4", "1", true},
+		{"3", "2", true},
+		{"4", "2", true},
+		{"3", "0", false},
+		{"4", "3", false},
+		{"2", "1", false},
+		{"7", "1", false},
+	}
+	for _, c := range cases {
+		got := leaveNewCanReport(LeaveNewItem{Status: c.status, ReportMode: c.reportMode})
+		if got != c.want {
+			t.Errorf("canReport(status=%s, reportMode=%s) = %v, want %v", c.status, c.reportMode, got, c.want)
+		}
+	}
+}
+
+// TestLeaveNewStatusText 验证状态文案映射完整
+func TestLeaveNewStatusText(t *testing.T) {
+	for _, code := range []string{"1", "2", "3", "4", "5", "6", "7", "8", "9", "10"} {
+		if LeaveNewStatusText[code] == "" {
+			t.Errorf("status %s 缺少文案映射", code)
+		}
+	}
+}
+
+// TestBuildLeaveNewReportForm 验证销假表单结构（含确认人与附件）
+func TestBuildLeaveNewReportForm(t *testing.T) {
+	approver := &LeaveNewApprover{UserWid: "92271929", UserId: "2022110006", UserName: "张文烨", RoleCode: "1003", RoleName: "辅导员", DeptName: "智能制造学院"}
+	form := BuildLeaveNewReportForm(LeaveNewReportParams{
+		LeaveID:   "e1529da9d4c94341b0b1f7f2278eb2ab",
+		Address:   "泰州学院",
+		Longitude: "119.948267",
+		Latitude:  "32.474102",
+		Approver:  approver,
+	})
+	if form["leaveId"] != "e1529da9d4c94341b0b1f7f2278eb2ab" {
+		t.Errorf("leaveId 缺失: %v", form["leaveId"])
+	}
+	loc, ok := form["location"].(map[string]interface{})
+	if !ok || loc["address"] != "泰州学院" {
+		t.Errorf("location 结构错误: %v", form["location"])
+	}
+	if form["approverWid"] != "92271929" || form["approverRoleCode"] != "1003" {
+		t.Errorf("确认人字段错误: approverWid=%v approverRoleCode=%v", form["approverWid"], form["approverRoleCode"])
+	}
+	if attachs, ok := form["attachs"].([]interface{}); !ok || len(attachs) != 0 {
+		t.Errorf("无附件时 attachs 应为空数组: %v", form["attachs"])
+	}
+
+	form2 := BuildLeaveNewReportForm(LeaveNewReportParams{
+		LeaveID: "x", Address: "a", Longitude: "1", Latitude: "2",
+		ImageURL: "https://cos.example.com/counselor/leave/1/attachment/a.jpeg?sign=1",
+	})
+	attachs2 := form2["attachs"].([]map[string]interface{})
+	if len(attachs2) != 1 || attachs2[0]["obsKey"] != "/counselor/leave/1/attachment/a.jpeg" {
+		t.Errorf("附件结构错误: %v", attachs2)
+	}
+}
+
+// TestBuildLeaveNewApplyForm 验证请假表单结构（离校/不离校两分支 + 抄送人）
+func TestBuildLeaveNewApplyForm(t *testing.T) {
+	approver := &LeaveNewApprover{UserWid: "92271929", UserId: "2022110006", UserName: "张文烨"}
+	form := BuildLeaveNewApplyForm(LeaveNewApplyParams{
+		TypeWid:         8214,
+		BeginTime:       "2026-09-16 08:00",
+		EndTime:         "2026-09-16 18:00",
+		LeaveReason:     "测试原因",
+		LocationAddr:    "泰州学院",
+		Longitude:       "119.9",
+		Latitude:        "32.4",
+		IsLeaveOut:      1,
+		Destination:     "江苏省/南京市/玄武区",
+		Detail:          "某地",
+		EmergencyName:   "张三",
+		EmergencyMobile: "13800000000",
+		Approver:        approver,
+		CcUsers:         []LeaveNewApprover{{UserWid: "1", UserId: "s1", UserName: "李四", RoleCode: "1003"}},
+		ImageURLs: []string{
+			"https://cos.example.com/counselor/leave/1/attachment/a.jpeg?sign=1",
+			"https://cos.example.com/counselor/leave/1/attachment/b.png?sign=2",
+		},
+	})
+	if form["typeWid"] != 8214 {
+		t.Errorf("typeWid 错误: %v", form["typeWid"])
+	}
+	attachs := form["attachs"].([]map[string]interface{})
+	if len(attachs) != 2 {
+		t.Fatalf("多附件应为 2 张: %v", attachs)
+	}
+	if attachs[0]["attachUrl"] != "https://cos.example.com/counselor/leave/1/attachment/a.jpeg?sign=1" ||
+		attachs[0]["obsKey"] != "/counselor/leave/1/attachment/a.jpeg" {
+		t.Errorf("第 1 张附件结构错误: %v", attachs[0])
+	}
+	if attachs[1]["attachUrl"] != "https://cos.example.com/counselor/leave/1/attachment/b.png?sign=2" ||
+		attachs[1]["obsKey"] != "/counselor/leave/1/attachment/b.png" {
+		t.Errorf("第 2 张附件结构错误: %v", attachs[1])
+	}
+	if attachs[0]["attachType"] != 1 || attachs[1]["attachType"] != 1 {
+		t.Errorf("attachType 应为 1: %v", attachs)
+	}
+	lo := form["leaveOutInfo"].(map[string]interface{})
+	if lo["isLeaveOut"] != 1 || lo["destination"] != "江苏省/南京市/玄武区" || lo["emergencyConcat"] != "张三" {
+		t.Errorf("leaveOutInfo 错误: %v", lo)
+	}
+	cc := form["ccObjects"].([]map[string]interface{})
+	if len(cc) != 1 || cc[0]["userWid"] != "1" || cc[0]["source"] != "2" {
+		t.Errorf("ccObjects 错误: %v", cc)
+	}
+
+	// 不离校分支：离校字段应清空
+	form2 := BuildLeaveNewApplyForm(LeaveNewApplyParams{TypeWid: 8216, IsLeaveOut: 0, Destination: "不该出现", EmergencyMobile: "138"})
+	lo2 := form2["leaveOutInfo"].(map[string]interface{})
+	if lo2["destination"] != "" || lo2["emergencyMobile"] != "" {
+		t.Errorf("不离校时离校字段应清空: %v", lo2)
+	}
+	if attachs2, ok := form2["attachs"].([]map[string]interface{}); !ok || len(attachs2) != 0 {
+		t.Errorf("无附件时 attachs 应为空数组: %v", form2["attachs"])
+	}
+}
+
+// TestLeaveNewResultErr 验证响应码解析（code 为字符串 "0"）
+func TestLeaveNewResultErr(t *testing.T) {
+	if _, err := leaveNewResultErr([]byte(`{"code":"0","message":"SUCCESS","datas":{}}`), "测试"); err != nil {
+		t.Errorf("code=0 不应报错: %v", err)
+	}
+	if _, err := leaveNewResultErr([]byte(`{"code":"-1","message":"参数错误"}`), "测试"); err == nil || err.Error() != "参数错误" {
+		t.Errorf("非 0 应返回 message: %v", err)
+	}
+	if _, err := leaveNewResultErr([]byte(`<html>404</html>`), "测试"); err == nil {
+		t.Error("非 JSON 应报错")
+	}
+}

backed/internal/service/cpdaily/leave_test.go

@@ -0,0 +1,204 @@
+package cpdaily
+
+import (
+	"encoding/json"
+	"net/http"
+	"net/http/httptest"
+	"testing"
+)
+
+// mock 销假模块接口：listOther 返回两行（一行待销假、一行已完成），
+// detailOther 返回规定销假位置（reportPlaces）与开关（reportApplyFlow/enableAttach）。
+// leaveType.code 故意用数字，复刻真实接口（此前声明为 string 导致解析失败）。
+func newLeaveMockServer(t *testing.T) *httptest.Server {
+	t.Helper()
+	return httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		w.Header().Set("Content-Type", "application/json")
+		switch r.URL.Path {
+		case "/wec-counselor-leave-apps/leave/stu/listOther":
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{
+				"code": "0",
+				"datas": map[string]interface{}{
+					"rows": []map[string]interface{}{
+						{
+							"id":          "301",
+							"leaveType":   "事假",
+							"leaveReason": "回家",
+							"createTime":  "2026-09-13 10:00",
+							"actEndTime":  "2026-09-14 08:00",
+							"status":      "8",
+						},
+						{
+							"id":        "302",
+							"leaveType": "病假",
+							"status":    "4", // 已完成，应被过滤
+						},
+					},
+				},
+			})
+		case "/wec-counselor-leave-apps/leave/stu/detailOther":
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{
+				"code": "0",
+				"datas": map[string]interface{}{
+					"detail": map[string]interface{}{
+						"id":        "301",
+						"startDate": "2026-09-13 10:00",
+						"endDate":   "2026-09-14 08:00",
+					},
+					"leaveType": map[string]interface{}{
+						"code":            1, // 数字，复刻真实返回
+						"name":            "事假",
+						"reportApplyFlow": 1,
+						"enableAttach":    1,
+					},
+					"reportPlaces": []map[string]interface{}{
+						{
+							"wid":       "1184",
+							"address":   "云南大学东二院",
+							"longitude": 102.70567818032221,
+							"latitude":  "25.059769487255817",
+							"radius":    "360",
+							"counName":  "ampadmin",
+						},
+					},
+				},
+			})
+		case "/wec-counselor-leave-apps/leave/stu/obtainApproveFlow":
+			var body map[string]interface{}
+			_ = json.NewDecoder(r.Body).Decode(&body)
+			// 时间必须带秒，否则真实服务端返回"日期时间格式错误"
+			start, _ := body["startTime"].(string)
+			end, _ := body["endTime"].(string)
+			if len(start) != 19 || len(end) != 19 {
+				_ = json.NewEncoder(w).Encode(map[string]interface{}{
+					"code": "2210990000", "message": "日期时间格式错误",
+				})
+				return
+			}
+			_ = json.NewEncoder(w).Encode(map[string]interface{}{
+				"code": "0",
+				"datas": map[string]interface{}{
+					"approvers": []map[string]interface{}{
+						{"userWid": "93458825", "userId": "20220109", "userName": "罗亭"},
+						{"userWid": "1246664953", "userId": "12024206007", "userName": "曾伟"},
+					},
+				},
+			})
+		default:
+			http.NotFound(w, r)
+		}
+	}))
+}
+
+func TestFetchLeaveListFiltersCompletedAndParsesReportPlaces(t *testing.T) {
+	srv := newLeaveMockServer(t)
+	defer srv.Close()
+
+	items, err := FetchLeaveList(map[string]string{"MOD_AUTH_CAS": "test"}, srv.URL)
+	if err != nil {
+		t.Fatalf("FetchLeaveList 返回错误: %v", err)
+	}
+	if len(items) != 1 {
+		t.Fatalf("期望过滤后剩 1 条待销假记录，实际 %d 条: %+v", len(items), items)
+	}
+	item := items[0]
+	if item.ID != "301" || item.LeaveType != "事假" || item.Reason != "回家" {
+		t.Errorf("列表字段解析错误: %+v", item)
+	}
+	if len(item.ReportPlaces) != 1 {
+		t.Fatalf("期望解析出 1 个规定销假位置，实际 %d 个", len(item.ReportPlaces))
+	}
+	p := item.ReportPlaces[0]
+	// 数字型经纬度应转为纯文本（避免科学计数法）
+	if p.Longitude != "102.70567818032221" || p.Latitude != "25.059769487255817" || p.Address != "云南大学东二院" || p.Radius != "360" {
+		t.Errorf("规定销假位置解析错误: %+v", p)
+	}
+	if !item.ReportApplyFlow || !item.EnableAttach {
+		t.Errorf("开关解析错误: reportApplyFlow=%v enableAttach=%v", item.ReportApplyFlow, item.EnableAttach)
+	}
+}
+
+func TestFetchLeaveDetailParsesSubmitFields(t *testing.T) {
+	srv := newLeaveMockServer(t)
+	defer srv.Close()
+
+	d, err := FetchLeaveDetail(map[string]string{}, srv.URL, "301")
+	if err != nil {
+		t.Fatalf("FetchLeaveDetail 返回错误: %v", err)
+	}
+	if d.ReportID != "301" {
+		t.Errorf("ReportID = %q, 期望 301", d.ReportID)
+	}
+	// 数字型 code 应转为纯文本 + 数字双形式
+	if d.LeaveCode != "1" {
+		t.Errorf("LeaveCode = %q, 期望 1", d.LeaveCode)
+	}
+	if d.LeaveCodeNum != 1 {
+		t.Errorf("LeaveCodeNum = %d, 期望 1", d.LeaveCodeNum)
+	}
+	if d.LeaveType != "事假" {
+		t.Errorf("LeaveType = %q, 期望 事假", d.LeaveType)
+	}
+	if !d.ReportApplyFlow || !d.EnableAttach {
+		t.Errorf("开关解析错误: reportApplyFlow=%v enableAttach=%v", d.ReportApplyFlow, d.EnableAttach)
+	}
+	if d.StartTime != "2026-09-13 10:00" || d.EndTime != "2026-09-14 08:00" {
+		t.Errorf("起止时间解析错误: %q ~ %q", d.StartTime, d.EndTime)
+	}
+}
+
+func TestFetchReportApprovers(t *testing.T) {
+	srv := newLeaveMockServer(t)
+	defer srv.Close()
+
+	list, err := FetchReportApprovers(map[string]string{}, srv.URL, 1, "2026-09-13 10:00", "2026-09-14 08:00")
+	if err != nil {
+		t.Fatalf("FetchReportApprovers 返回错误: %v", err)
+	}
+	if len(list) != 2 || list[0].UserName != "罗亭" || list[0].UserWid != "93458825" {
+		t.Errorf("审批人解析错误: %+v", list)
+	}
+
+	// 秒级时间：入参已含秒时原样透传
+	if got := leaveTimeWithSeconds("2026-09-13 10:00:30"); got != "2026-09-13 10:00:30" {
+		t.Errorf("已含秒时间不应改动，实际 %q", got)
+	}
+}
+
+func TestBuildLeaveReportForm(t *testing.T) {
+	d := &LeaveDetail{
+		ReportID:  "301",
+		LeaveCode: "1",
+		ReportPlaces: []LeaveReportPlace{
+			{Address: "规定位置地址", Longitude: "118.1", Latitude: "24.6"},
+		},
+	}
+
+	// 无用户地址：兜底使用第一个规定销假位置地址；无图片：reportAttach 为空数组
+	form := BuildLeaveReportForm(d, "", "", "")
+	if form["reportLocation"] != "规定位置地址" {
+		t.Errorf("reportLocation 应兜底规定位置地址，实际 %v", form["reportLocation"])
+	}
+	if attach, ok := form["reportAttach"].([]interface{}); !ok || len(attach) != 0 {
+		t.Errorf("无图片时 reportAttach 应为空数组，实际 %v", form["reportAttach"])
+	}
+	if form["approverWid"] != "" {
+		t.Errorf("未选审批人时 approverWid 应为空字符串，实际 %v", form["approverWid"])
+	}
+	if form["id"] != "301" || form["leaveType"] != "1" {
+		t.Errorf("id/leaveType 字段错误: %v / %v", form["id"], form["leaveType"])
+	}
+
+	// 用户地址优先 + 有图片 + 选择了审批人
+	form2 := BuildLeaveReportForm(d, "用户填写地址", "https://obs.example.com/a.jpg", "93458825")
+	if form2["reportLocation"] != "用户填写地址" {
+		t.Errorf("用户填写的地址应优先，实际 %v", form2["reportLocation"])
+	}
+	if form2["approverWid"] != "93458825" {
+		t.Errorf("应携带所选审批人，实际 %v", form2["approverWid"])
+	}
+	attach, ok := form2["reportAttach"].([]map[string]interface{})
+	if !ok || len(attach) != 1 || attach[0]["type"] != 1 || attach[0]["url"] != "https://obs.example.com/a.jpg" {
+		t.Errorf("有图片时 reportAttach 结构错误: %v", form2["reportAttach"])
+	}
+}

backed/internal/service/cpdaily/login_cas.go

@@ -35,8 +35,23 @@ func newSessionClient() *sessionClient {
 		}).
 		SetHeader("User-Agent", "Mozilla/5.0 (iPhone; CPU iPhone OS 17_0 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.0 Mobile/15E148 Safari/604.1")
 	client.SetCookieJar(jar)
-	client.SetRedirectPolicy(resty.FlexibleRedirectPolicy(20))
-
+	// 自定义重定向策略：与 resty 默认 FlexibleRedirectPolicy 行为一致（最多 20 跳），
+	// 但跨 host 重定向时保留原 User-Agent。resty 默认策略会把跨 host 请求的 UA 换成
+	// "go-resty/2.x"（见 resty redirect.go checkHostAndAddHeaders），而 wisedu 定制 CAS
+	// 按请求 UA 渲染移动端/PC 模板。云南大学等学校从 campusphere 网关跨域跳到 CAS 时
+	// UA 被替换，CAS 渲染 PC 模板导致后续 MFA 页面(reAuthLoginView.do)校验失败被
+	// 302 踢回登录页，无法解析 reAuthType。保留 UA 后移动端模板正常渲染。
+	client.SetRedirectPolicy(resty.RedirectPolicyFunc(func(req *http.Request, via []*http.Request) error {
+		if len(via) >= 20 {
+			return fmt.Errorf("stopped after %d redirects", 20)
+		}
+		if len(via) > 0 && !strings.EqualFold(getHostnameForRedirect(req.URL.Host), getHostnameForRedirect(via[0].URL.Host)) {
+			if ua := via[0].Header.Get("User-Agent"); ua != "" {
+				req.Header.Set("User-Agent", ua)
+			}
+		}
+		return nil
+	}))
 	return &sessionClient{
 		Client: client,
 		jar:    jar,
@@ -52,7 +67,15 @@ func readBody(resp *resty.Response) []byte {
 	return resp.Body()
 }
 
-func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, error) {
+// getHostnameForRedirect 去掉端口后返回小写主机名（重定向跨域判断用）
+func getHostnameForRedirect(host string) string {
+	if i := strings.Index(host, ":"); i > 0 {
+		host = host[:i]
+	}
+	return strings.ToLower(host)
+}
+
+func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, *MFAContext, error) {
 	sc := newSessionClient()
 
 	// 1. 获取合法的登录 URL
@@ -65,7 +88,7 @@ func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password
 
 	loginPageResp, err := sc.R().SetContext(loginCtx).Get(loginUrl)
 	if err != nil {
-		return nil, fmt.Errorf("请求登录页面失败: %w", err)
+		return nil, nil, fmt.Errorf("请求登录页面失败: %w", err)
 	}
 
 	loginPageBytes := readBody(loginPageResp)
@@ -83,13 +106,25 @@ func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password
 	needCaptcha, loginType := detectCaptcha(ctx, loginResponseUrl, username, sc.Client)
 	slog.Info("CAS验证码检测", "needCaptcha", needCaptcha, "loginType", loginType)
 	if needCaptcha {
-		captchaCode := resolveOcrCaptcha(ctx, loginResponseUrl, loginType, sc.Client)
-		slog.Info("CAS验证码OCR", "code", captchaCode)
-		switch loginType {
-		case 0:
-			allInputs["captchaResponse"] = captchaCode
-		default:
-			allInputs["captcha"] = captchaCode
+		if isSliderCaptchaSchool(school.ID) {
+			// 滑块验证码学校（wisedu 定制 CAS 滑块，如华侨大学）：
+			// openSliderCaptcha 取图 → 打码平台识别 → 等激活窗口 → sign 协议提交 verifySliderCaptcha
+			//（提交打码值 v、v+1、v-1，失败换图重试，详见 slider.go），
+			// 通过后 captcha 字段留空提交
+			casBase := fmt.Sprintf("%s://%s/authserver", loginResponseUrl.Scheme, loginResponseUrl.Host)
+			if err := resolveWiseduSliderCaptcha(loginCtx, casBase, loginResponseUrl.String(), sc.Client); err != nil {
+				return nil, nil, fmt.Errorf("滑块验证失败: %w", err)
+			}
+			slog.Info("CAS滑块验证通过")
+		} else {
+			captchaCode := resolveOcrCaptcha(ctx, loginResponseUrl, loginType, sc.Client)
+			slog.Info("CAS验证码OCR", "code", captchaCode)
+			switch loginType {
+			case 0:
+				allInputs["captchaResponse"] = captchaCode
+			default:
+				allInputs["captcha"] = captchaCode
+			}
 		}
 	}
 
@@ -103,7 +138,7 @@ func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password
 		if loginResp != nil && loginResp.StatusCode() == 302 {
 			slog.Info("CAS登录重定向（登录成功）", "location", loginResp.Header().Get("Location"))
 		} else {
-			return nil, fmt.Errorf("提交登录失败: %w", err)
+			return nil, nil, fmt.Errorf("提交登录失败: %w", err)
 		}
 	}
 
@@ -112,8 +147,20 @@ func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password
 	// 7. 处理响应
 	switch loginResp.StatusCode() {
 	case 302:
-		slog.Info("CAS登录成功", "redirect", loginResp.Header().Get("Location"))
-		return handleCasLoginSuccess(ctx, loginResp, school, sc)
+		location := loginResp.Header().Get("Location")
+		// 多因子认证：302 到 reAuthCheck/reAuthLoginView.do?isMultifactor=true&service=...
+		// 此时 CAS 会话有效但未签发票据，需自动发送验证码并等待用户提交
+		if strings.Contains(location, "isMultifactor=true") || strings.Contains(location, "reAuthCheck") {
+			slog.Info("CAS触发多因子认证(MFA)", "location", location)
+			mfa, err := handleMFATriggered(ctx, loginResp, school, sc)
+			if err != nil {
+				return nil, nil, err
+			}
+			return nil, mfa, ErrMFARequired
+		}
+		slog.Info("CAS登录成功", "redirect", location)
+		cookies, err := handleCasLoginSuccess(ctx, loginResp, school, sc)
+		return cookies, nil, err
 	case 200, 401:
 		body := readBody(loginResp)
 		slog.Info("CAS登录失败响应体", "body", string(body[:min(len(body), 2000)]))
@@ -121,15 +168,16 @@ func casLogin(ctx context.Context, school *SchoolDetailInfo, username, password
 		if err == nil && isCasNeedKickOut(doc) {
 			slog.Info("CAS需要踢下线")
 			kickResp := submitCasKickOut(ctx, loginResponseUrl.String(), doc, sc.Client)
-			return handleCasLoginSuccess(ctx, kickResp, school, sc)
+			cookies, err := handleCasLoginSuccess(ctx, kickResp, school, sc)
+			return cookies, nil, err
 		}
 		msg := getCasErrorMessage(doc)
 		if msg == "" {
 			msg = "登录失败，请检查账号密码"
 		}
-		return nil, fmt.Errorf("%s", msg)
+		return nil, nil, fmt.Errorf("%s", msg)
 	default:
-		return nil, fmt.Errorf("登录返回异常状态码: %d", loginResp.StatusCode())
+		return nil, nil, fmt.Errorf("登录返回异常状态码: %d", loginResp.StatusCode())
 	}
 }
 
@@ -164,8 +212,10 @@ func parseLoginForm(page []byte, username, password string) map[string]string {
 		return inputs
 	}
 
-	// 优先选择密码登录表单（pwdFromId），其次是其他已知CAS表单ID
-	selectors := []string{"#pwdFromId", "#phoneFromId", "#casLoginForm", "#loginFromId", "#fm1", "form"}
+	// 优先选择密码登录表单（pwdFromId/pwdLoginDiv），其次是其他已知CAS表单ID。
+	// pwdLoginDiv 为 wisedu 定制 CAS 的账密区域（如华侨大学登录页含 3 个 id 均为
+	// loginFromId 的表单 fido/动态码/账密，账密字段位于 #pwdLoginDiv 内）
+	selectors := []string{"#pwdFromId", "#phoneFromId", "#casLoginForm", "#pwdLoginDiv", "#loginFromId", "#fm1", "form"}
 	var formSel *goquery.Selection
 	for _, sel := range selectors {
 		formSel = doc.Find(sel)

backed/internal/service/cpdaily/login_lntu.go

@@ -0,0 +1,43 @@
+package cpdaily
+
+import (
+	"context"
+	"net/http"
+	"strings"
+)
+
+// ========== 辽宁工程技术大学（lntu）单独适配 ==========
+
+// LntuSchoolId 辽宁工程技术大学 tenant id
+const LntuSchoolId = "lntu"
+
+// lntuCasLoginEntry 计算辽宁工程技术大学 CAS 登录入口：
+// 网关域 fdm.lntu.edu.cn 的 /iap（school.IdsUrl）会 302 到学校 CAS
+// （authserver.lntu.edu.cn/authserver/login），service 参数携带网关回调
+// /iap/loginSuccess?sessionToken=...；走完 CAS 账密后回调该地址，
+// cookie 才能正确落在 fdm.lntu.edu.cn 域（wec-* 任务接口所在域）。
+func lntuCasLoginEntry(school *SchoolDetailInfo) string {
+	if school == nil {
+		return ""
+	}
+	if school.IdsUrl != "" && strings.Contains(school.IdsUrl, "/iap") {
+		return school.IdsUrl
+	}
+	if school.WecloudUrl != "" {
+		return strings.TrimSuffix(school.WecloudUrl, "/") + "/iap"
+	}
+	return school.AmpUrl
+}
+
+// lntuCasLogin 辽宁工程技术大学强制走 CAS：
+// 平台接口返回 joinType=CLOUD（IsIap()=true），但网关 /iap/doLogin 不存在（HTTP 405），
+// IAP 账密提交必然失败并报 FAIL_UPNOTMATCH（"用户名或密码不匹配"，误导用户）；
+// 实际链路为 IAP 入口（fdm.lntu.edu.cn/iap）302 → 学校 CAS 账密 → 回调
+// /iap/loginSuccess 建立网关会话。因此强制走 CAS 流程（同许昌学院 xcu 模式）。
+func lntuCasLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, *MFAContext, error) {
+	lntu := *school
+	if entry := lntuCasLoginEntry(school); entry != "" {
+		lntu.AmpUrl = entry
+	}
+	return casLogin(ctx, &lntu, username, password)
+}

backed/internal/service/cpdaily/login_lntu_test.go

@@ -0,0 +1,91 @@
+package cpdaily
+
+import "testing"
+
+// TestLntuCasLoginEntry 覆盖辽宁工程技术大学 CAS 登录入口计算逻辑
+func TestLntuCasLoginEntry(t *testing.T) {
+	cases := []struct {
+		name   string
+		school *SchoolDetailInfo
+		want   string
+	}{
+		{
+			name:   "正常idsUrl（/iap 网关入口）",
+			school: &SchoolDetailInfo{IdsUrl: "https://fdm.lntu.edu.cn/iap"},
+			want:   "https://fdm.lntu.edu.cn/iap",
+		},
+		{
+			name:   "idsUrl缺失回退wecloud+/iap",
+			school: &SchoolDetailInfo{WecloudUrl: "https://fdm.lntu.edu.cn"},
+			want:   "https://fdm.lntu.edu.cn/iap",
+		},
+		{
+			name:   "wecloud带尾斜杠",
+			school: &SchoolDetailInfo{WecloudUrl: "https://fdm.lntu.edu.cn/"},
+			want:   "https://fdm.lntu.edu.cn/iap",
+		},
+		{
+			name:   "idsUrl非iap路径回退wecloud",
+			school: &SchoolDetailInfo{IdsUrl: "https://ids.lntu.edu.cn/authserver", WecloudUrl: "https://fdm.lntu.edu.cn"},
+			want:   "https://fdm.lntu.edu.cn/iap",
+		},
+		{
+			name:   "均缺失回退ampUrl",
+			school: &SchoolDetailInfo{AmpUrl: "https://fdm.lntu.edu.cn/wec-portal-mobile/client"},
+			want:   "https://fdm.lntu.edu.cn/wec-portal-mobile/client",
+		},
+		{
+			name:   "均为空",
+			school: &SchoolDetailInfo{},
+			want:   "",
+		},
+		{
+			name:   "nil学校",
+			school: nil,
+			want:   "",
+		},
+	}
+	for _, c := range cases {
+		t.Run(c.name, func(t *testing.T) {
+			if got := lntuCasLoginEntry(c.school); got != c.want {
+				t.Errorf("lntuCasLoginEntry() = %q, want %q", got, c.want)
+			}
+		})
+	}
+}
+
+// TestLntuCasLoginEntryOverridesAmpUrl 确认 lntuCasLogin 用网关入口覆盖 ampUrl 后走 CAS 流程
+func TestLntuCasLoginEntryOverridesAmpUrl(t *testing.T) {
+	school := &SchoolDetailInfo{
+		ID:         LntuSchoolId,
+		Name:       "辽宁工程技术大学",
+		JoinType:   "CLOUD", // 平台标记为 CLOUD，但 IAP 不可用，需强制 CAS
+		IdsUrl:     "https://fdm.lntu.edu.cn/iap",
+		WecloudUrl: "https://fdm.lntu.edu.cn",
+		AmpUrl:     "https://fdm.lntu.edu.cn/wec-portal-mobile/client",
+	}
+	// 模拟 lntuCasLogin 内部的入口覆盖（不发起网络请求）
+	clone := *school
+	clone.AmpUrl = lntuCasLoginEntry(school)
+	if got := getCasValidLoginUrl(&clone); got != "https://fdm.lntu.edu.cn/iap" {
+		t.Errorf("getCasValidLoginUrl() = %q, want 网关 /iap 入口", got)
+	}
+	// 原对象不被修改
+	if school.AmpUrl != "https://fdm.lntu.edu.cn/wec-portal-mobile/client" {
+		t.Errorf("原 school 对象 ampUrl 被意外修改: %q", school.AmpUrl)
+	}
+}
+
+// TestLntuIsSliderCaptchaSchool 确认 lntu 归入滑块验证码学校需通过配置声明
+// （captchaSwitch=2 + createSliderCaptcha → /common/toSliderCaptcha.htl，与 hqdx 同协议）
+func TestLntuSliderProtocolSameAsHqu(t *testing.T) {
+	// 协议一致性由配置驱动：lntu 与 hqdx 共用 resolveWiseduSliderCaptcha
+	//（openSliderCaptcha.htl 取图 → 打码 → verifySliderCaptcha.htl sign 提交）。
+	// 此处仅断言常量存在且不与其他学校 ID 冲突。
+	if LntuSchoolId == "" || LntuSchoolId != "lntu" {
+		t.Errorf("LntuSchoolId = %q, want lntu", LntuSchoolId)
+	}
+	if HquSchoolId == LntuSchoolId {
+		t.Errorf("lntu 与 hqdx 学校 ID 冲突")
+	}
+}

backed/internal/service/cpdaily/login_mfa.go

@@ -0,0 +1,485 @@
+package cpdaily
+
+import (
+	"context"
+	"encoding/json"
+	"fmt"
+	"log/slog"
+	"net/http"
+	"net/url"
+	"regexp"
+	"strings"
+	"time"
+
+	"github.com/PuerkitoBio/goquery"
+	"github.com/go-resty/resty/v2"
+)
+
+// ========== CAS 多因子认证（MFA / reAuth）==========
+
+// 今日校园定制 CAS 的多因子认证扩展（reAuthCheck）。
+// 触发场景：CAS 账密提交成功后不是直接签发 ST 票据，而是 302 到
+//   {base}/authserver/reAuthCheck/reAuthLoginView.do?isMultifactor=true&service=<encoded>
+// 该页面渲染当前用户全部可用的二次认证方式（Tab / 更多菜单 / 旧版列表），
+// 调用方应把方式列表返回给用户选择；用户选定后调用发码接口（按需先 changeReAuthType.do
+// 切换服务端会话方式），用户取得验证码后再提交 reAuthSubmit.do 完成认证，
+// 最后访问 /login?service= 完成票据交换。
+
+// ErrMFARequired 表示本次登录触发了多因子认证，
+// 调用方应为返回的 MFAContext 暂存并引导用户选择验证方式、获取验证码并提交。
+var ErrMFARequired = fmt.Errorf("mfa_required")
+
+// ErrMFASessionExpired 表示 MFA 中间会话已失效（Redis 过期 / reAuth_unauthorized / 会话被服务端作废），
+// 调用方应引导用户重新登录（可用 errors.Is 判断）。
+var ErrMFASessionExpired = fmt.Errorf("mfa_session_expired")
+
+// MFAAuthMethod 一种可用的多因子验证方式（来自 MFA 页面渲染的可用方式列表）
+type MFAAuthMethod struct {
+	Type    string `json:"type"`              // reAuthType 数字编码（3=短信 4=企业微信 5=今日校园 11=邮箱 12=钉钉 13=WeLink 15=公众号）
+	Name    string `json:"name"`              // 展示名（优先页面文案，缺省用内置映射）
+	Default bool   `json:"default,omitempty"` // 页面默认选中项
+}
+
+// MFAContext 触发 MFA 后的中间会话状态（可 JSON 序列化存 Redis，TTL 内有效）
+type MFAContext struct {
+	BaseURL          string                    `json:"baseUrl"`                // CAS 根地址，如 http://ids.hfpec.edu.cn
+	ContextPath      string                    `json:"contextPath"`            // CAS 上下文路径，默认 /authserver
+	Service          string                    `json:"service"`                // reAuth service（含 sessionToken）
+	ReAuthType       string                    `json:"reAuthType"`             // 当前/用户最后选定的方式：2=密码 3=短信 5=今日校园 11=邮箱 12=钉钉 13=WeLink 15=公众号
+	UserID           string                    `json:"userId"`                 // 学工号
+	AuthMethods      []MFAAuthMethod           `json:"authMethods,omitempty"`  // 页面支持的全部可用验证方式
+	WecloudUrl       string                    `json:"wecloudUrl"`             // 完成登录后 activateSession 所需
+	CookiesByHost    map[string][]*http.Cookie `json:"cookiesByHost"`          // CAS 阶段会话（按域保存）
+}
+
+// MFASendResult 发送 MFA 验证码的结果
+type MFASendResult struct {
+	Mobile   string `json:"mobile,omitempty"`   // 收码目标（手机号等，可能带掩码）
+	CodeTime int    `json:"codeTime,omitempty"` // 可再次发送的倒计时秒数（0 表示不限制/未提供）
+	Message  string `json:"message,omitempty"`  // 服务端提示文案
+}
+
+// reAuthType → 发码接口的 authCodeTypeName 映射（源自 mobile-reAuth.js sendDynamicCodeByPhone）
+var reAuthCodeTypeNames = map[string]string{
+	"3":  "reAuthDynamicCodeType",              // 手机短信
+	"4":  "reAuthWChatDynamicCodeType",         // 企业微信
+	"5":  "reAuthCpdailyDynamicCodeType",       // 今日校园
+	"11": "reAuthEmailDynamicCodeType",         // 邮箱
+	"12": "reAuthDingTalkDynamicCodeType",      // 钉钉
+	"13": "reAuthWeLinkDynamicCodeType",        // WeLink
+	"15": "reAuthWeChatServiceDynamicCodeType", // 微信公众号
+}
+
+// reAuthType → 默认展示名（页面 Tab 无文案时兜底）
+var reAuthTypeNames = map[string]string{
+	"2":  "密码验证",
+	"3":  "短信验证码",
+	"4":  "企业微信验证码",
+	"5":  "今日校园验证码",
+	"6":  "实人认证",
+	"7":  "安全问题",
+	"9":  "QQ扫码",
+	"10": "安全令牌OTP",
+	"11": "邮箱验证",
+	"12": "钉钉验证码",
+	"13": "WeLink验证码",
+	"15": "公众号验证码",
+}
+
+// 需要发送动态码的 reAuthType 集合（密码/人脸/密保问题等类型不走发码接口）
+func reAuthTypeNeedsDynamicCode(reAuthType string) bool {
+	_, ok := reAuthCodeTypeNames[reAuthType]
+	return ok
+}
+
+var (
+	reAuthParamsBlockRegexp = regexp.MustCompile(`var\s+reAuthParams\s*=\s*\{([\s\S]*?)\n\s*\}`)
+	reAuthTypeRegexp        = regexp.MustCompile(`"reAuthType"\s*:\s*"([^"]*)"`)
+	reAuthServiceRegexp     = regexp.MustCompile(`"service"\s*:\s*"([^"]*)"`)
+	reAuthUserIdRegexp      = regexp.MustCompile(`"reAuthUserId"\s*:\s*"([^"]*)"`)
+	contextPathRegexp       = regexp.MustCompile(`contextPath\s*=\s*"([^"]*)"`)
+	trailingDigitsRegexp    = regexp.MustCompile(`(\d+)$`)
+)
+
+// 页面可用验证方式选择器（兼容历代模板；注释块内的元素不会被 goquery 匹配）：
+//   .mobile-reauth-tab-item[data-type]  移动端 Tab（如 id="mobile_tab_5"）
+//   .reauth-tab-item[data-type]         新版统一模板 Tab（如 id="tab_13"）
+//   .reauth-tab-more-item[id]           "更多"菜单（id 即编号）
+//   .changeReAuthTypes[id]              旧版列表（id 即编号）
+//   .other_type_button[id]              "选择认证方式"弹窗按钮（如许昌学院 xcuTheme，id 即编号）
+const mfaMethodSelectors = ".mobile-reauth-tab-item, .reauth-tab-item, .reauth-tab-more-item, .changeReAuthTypes, .other_type_button"
+
+// parseMFAAuthMethods 从 MFA 页面解析全部可用验证方式（返回页面渲染顺序）
+func parseMFAAuthMethods(page string) []MFAAuthMethod {
+	doc, err := goquery.NewDocumentFromReader(strings.NewReader(page))
+	if err != nil {
+		return nil
+	}
+	var methods []MFAAuthMethod
+	seen := make(map[string]bool)
+	doc.Find(mfaMethodSelectors).Each(func(_ int, s *goquery.Selection) {
+		reAuthType := strings.TrimSpace(s.AttrOr("data-type", ""))
+		if reAuthType == "" {
+			// 无 data-type 时从 id 提取尾部数字：mobile_tab_5 / tab_13 / 5 均可
+			reAuthType = trailingDigitsRegexp.FindString(s.AttrOr("id", ""))
+		}
+		if reAuthType == "" || seen[reAuthType] {
+			return
+		}
+		name := strings.TrimSpace(s.Find(".mobile-reauth-tab-text").Text())
+		if name == "" {
+			name = strings.TrimSpace(s.Text())
+		}
+		if name == "" {
+			name = reAuthTypeNames[reAuthType]
+		}
+		if name == "" {
+			name = "验证方式" + reAuthType
+		}
+		seen[reAuthType] = true
+		methods = append(methods, MFAAuthMethod{
+			Type:    reAuthType,
+			Name:    name,
+			Default: s.HasClass("mobile-reauth-tab-active") || s.HasClass("reauth-tab-active"),
+		})
+	})
+	return methods
+}
+
+// normalizeMFAAuthMethods 规范化可用验证方式列表：
+//  1. 仅保留能接收动态码、本流程可完成的方式（短信/企业微信/今日校园/邮箱/钉钉/WeLink/公众号）；
+//  2. 过滤后为空时保留原列表（页面异常时前端仍能看到可选方式，发码时会得到明确提示）；
+//  3. 列表整体为空（页面无 Tab / 解析失败）且当前方式支持动态码时，用当前方式兜底为唯一选项，
+//     避免前端「选择验证方式」无项可选、流程走不通；
+//  4. 页面未标记默认项时，按 defaultType 标记，最后兜底标记首项。
+func normalizeMFAAuthMethods(methods []MFAAuthMethod, defaultType string) []MFAAuthMethod {
+	var supported []MFAAuthMethod
+	for _, m := range methods {
+		if reAuthTypeNeedsDynamicCode(m.Type) {
+			supported = append(supported, m)
+		}
+	}
+	if len(supported) > 0 {
+		methods = supported
+	}
+	if len(methods) == 0 {
+		if !reAuthTypeNeedsDynamicCode(defaultType) {
+			return methods
+		}
+		// 页面无 Tab（解析失败或旧版模板）：用当前 reAuthType 兜底为唯一方式
+		name := reAuthTypeNames[defaultType]
+		if name == "" {
+			name = "验证方式" + defaultType
+		}
+		return []MFAAuthMethod{{Type: defaultType, Name: name, Default: true}}
+	}
+	if !hasDefaultMFAMethod(methods) {
+		for i := range methods {
+			if methods[i].Type == defaultType {
+				methods[i].Default = true
+				break
+			}
+		}
+	}
+	if !hasDefaultMFAMethod(methods) {
+		methods[0].Default = true
+	}
+	return methods
+}
+
+// hasDefaultMFAMethod 列表内是否已有默认项
+func hasDefaultMFAMethod(methods []MFAAuthMethod) bool {
+	for _, m := range methods {
+		if m.Default {
+			return true
+		}
+	}
+	return false
+}
+
+// handleMFATriggered 处理 CAS 登录后 302 到 MFA 页面的情况：
+// 解析 MFA 页面参数与全部可用验证方式，返回 MFAContext 供用户选择方式、发送并提交验证码。
+func handleMFATriggered(ctx context.Context, resp *resty.Response, school *SchoolDetailInfo, sc *sessionClient) (*MFAContext, error) {
+	location, err := resp.RawResponse.Location()
+	if err != nil {
+		return nil, fmt.Errorf("获取MFA重定向地址失败: %w", err)
+	}
+
+	// 恢复自动重定向（后续请求页面需要跟随）
+	sc.SetRedirectPolicy(resty.FlexibleRedirectPolicy(10))
+	pageResp, err := sc.R().SetContext(ctx).Get(location.String())
+	if err != nil {
+		return nil, fmt.Errorf("请求MFA页面失败: %w", err)
+	}
+	page := string(readBody(pageResp))
+	slog.Info("MFA页面获取", "url", location.String(), "bodyLen", len(page))
+
+	mfa := &MFAContext{
+		WecloudUrl: school.WecloudUrl,
+	}
+
+	// CAS 根地址与上下文路径
+	if u, err := url.Parse(location.String()); err == nil {
+		mfa.BaseURL = u.Scheme + "://" + u.Host
+	}
+	mfa.ContextPath = "/authserver"
+	if m := contextPathRegexp.FindStringSubmatch(page); len(m) > 1 {
+		mfa.ContextPath = strings.ReplaceAll(m[1], `\/`, "/")
+	}
+
+	// 解析 reAuthParams 块内的关键字段
+	block := reAuthParamsBlockRegexp.FindStringSubmatch(page)
+	if len(block) > 1 {
+		params := block[1]
+		if m := reAuthTypeRegexp.FindStringSubmatch(params); len(m) > 1 {
+			mfa.ReAuthType = m[1]
+		}
+		if m := reAuthServiceRegexp.FindStringSubmatch(params); len(m) > 1 {
+			mfa.Service = strings.ReplaceAll(m[1], `\/`, "/")
+		}
+		if m := reAuthUserIdRegexp.FindStringSubmatch(params); len(m) > 1 {
+			mfa.UserID = m[1]
+		}
+	}
+	// 兜底：service 从 302 Location 的 query 取
+	if mfa.Service == "" {
+		mfa.Service = location.Query().Get("service")
+	}
+	if mfa.ReAuthType == "" {
+		mfa.ReAuthType = "5"
+		slog.Warn("MFA页面未解析到reAuthType，按动态码处理", "base", mfa.BaseURL)
+	}
+
+	// 解析页面全部可用验证方式（Tab / 更多菜单 / 旧版列表）
+	mfa.AuthMethods = normalizeMFAAuthMethods(parseMFAAuthMethods(page), mfa.ReAuthType)
+	slog.Info("MFA参数解析", "reAuthType", mfa.ReAuthType, "userId", mfa.UserID,
+		"service", mfa.Service, "methods", len(mfa.AuthMethods))
+
+	// 不再自动发送验证码：由用户在前端选择验证方式后调用 SendMFADynamicCode 发送
+	if !reAuthTypeNeedsDynamicCode(mfa.ReAuthType) {
+		slog.Warn("MFA默认验证方式非动态码类型，需用户选择其他方式", "reAuthType", mfa.ReAuthType)
+	}
+
+	// 保存当前 CAS 会话（按域）
+	mfa.CookiesByHost = sc.jar.AllCookiesByHost()
+
+	return mfa, nil
+}
+
+// restoreMFACasSession 把触发 MFA 时保存的 CAS 会话恢复到新的会话客户端
+func restoreMFACasSession(sc *sessionClient, mfa *MFAContext) {
+	for host, cookies := range mfa.CookiesByHost {
+		u := &url.URL{Scheme: "http", Host: host}
+		if strings.HasPrefix(mfa.BaseURL, "https://") {
+			u.Scheme = "https"
+		}
+		sc.jar.SetCookies(u, cookies)
+	}
+}
+
+// changeMFAAuthType 调用 changeReAuthType.do 把服务端 MFA 会话切换到指定验证方式
+// POST {base}{contextPath}/reAuthCheck/changeReAuthType.do
+func changeMFAAuthType(ctx context.Context, client *resty.Client, mfa *MFAContext, reAuthType string) error {
+	changeUrl := mfa.BaseURL + mfa.ContextPath + "/reAuthCheck/changeReAuthType.do"
+	resp, err := client.R().SetContext(ctx).
+		SetFormData(map[string]string{
+			"isMultifactor": "true",
+			"reAuthType":    reAuthType,
+			"service":       mfa.Service,
+		}).
+		Post(changeUrl)
+	if err != nil {
+		return fmt.Errorf("切换MFA验证方式失败: %w", err)
+	}
+	body := readBody(resp)
+	slog.Info("MFA切换验证方式响应", "status", resp.StatusCode(), "reAuthType", reAuthType,
+		"body", string(body[:min(len(body), 500)]))
+
+	// code 兼容数字 1 与字符串 "1"（不同学校版本返回类型不一致）
+	var result struct {
+		Code    interface{} `json:"code"`
+		Message string      `json:"message"`
+	}
+	if err := json.Unmarshal(body, &result); err != nil {
+		return fmt.Errorf("切换MFA验证方式响应解析失败: %w", err)
+	}
+	if fmt.Sprintf("%v", result.Code) != "1" {
+		return fmt.Errorf("%s", orDefault(result.Message, "该验证方式暂不可用，请选择其他方式"))
+	}
+	return nil
+}
+
+// sendReAuthDynamicCodeResult 发码接口响应
+type sendReAuthDynamicCodeResult struct {
+	Res           string `json:"res"`           // success/cpdaily_success/wechat_success/other_success/code_time_fail
+	ReturnMessage string `json:"returnMessage"` // 服务端提示文案
+	Mobile        string `json:"mobile"`        // 收码目标（手机号等）
+	CodeTime      int    `json:"codeTime"`      // 可再次发送的倒计时秒数
+	ErrCode       string `json:"errCode"`       // 错误码（如 206302 会话失效）
+}
+
+// postReAuthDynamicCode 调用 CAS 发码接口发送验证码
+// POST {base}{contextPath}/dynamicCode/getDynamicCodeByReauth.do
+func postReAuthDynamicCode(ctx context.Context, client *resty.Client, mfa *MFAContext, authCodeTypeName string) (*sendReAuthDynamicCodeResult, error) {
+	sendUrl := mfa.BaseURL + mfa.ContextPath + "/dynamicCode/getDynamicCodeByReauth.do"
+	resp, err := client.R().SetContext(ctx).
+		SetFormData(map[string]string{
+			"userName":         mfa.UserID,
+			"authCodeTypeName": authCodeTypeName,
+		}).
+		Post(sendUrl)
+	if err != nil {
+		return nil, fmt.Errorf("发送MFA验证码失败: %w", err)
+	}
+	body := readBody(resp)
+	slog.Info("MFA验证码发送响应", "status", resp.StatusCode(), "body", string(body[:min(len(body), 500)]))
+
+	var result sendReAuthDynamicCodeResult
+	if err := json.Unmarshal(body, &result); err != nil {
+		return nil, fmt.Errorf("发送MFA验证码响应解析失败: %w", err)
+	}
+	// 206302：服务端 MFA 会话已失效
+	if result.ErrCode == "206302" {
+		return nil, fmt.Errorf("%w: 验证会话已失效，请重新登录", ErrMFASessionExpired)
+	}
+
+	switch result.Res {
+	case "success", "cpdaily_success", "wechat_success", "other_success", "code_time_fail":
+		// 发送成功（code_time_fail 为倒计时未结束，验证码此前已发出）
+		return &result, nil
+	default:
+		msg := result.ReturnMessage
+		if msg == "" {
+			msg = "发送验证码失败，请稍后重试"
+		}
+		return nil, fmt.Errorf("%s", msg)
+	}
+}
+
+// SendMFADynamicCode 用户选定验证方式后发送动态验证码：
+// 与当前方式不同时先调用 changeReAuthType.do 切换服务端会话，再调用发码接口；
+// 成功后同步 mfa.ReAuthType，供后续 reAuthSubmit.do 提交使用。
+func SendMFADynamicCode(ctx context.Context, mfa *MFAContext, reAuthType string) (*MFASendResult, error) {
+	if mfa == nil || len(mfa.CookiesByHost) == 0 {
+		return nil, fmt.Errorf("%w: 验证会话不存在，请重新登录", ErrMFASessionExpired)
+	}
+	if reAuthType == "" {
+		reAuthType = mfa.ReAuthType
+	}
+	if len(mfa.AuthMethods) > 0 && !mfaHasAuthMethod(mfa.AuthMethods, reAuthType) {
+		return nil, fmt.Errorf("不支持的验证方式，请选择其他方式")
+	}
+	if !reAuthTypeNeedsDynamicCode(reAuthType) {
+		name := reAuthTypeNames[reAuthType]
+		if name == "" {
+			name = "验证方式" + reAuthType
+		}
+		return nil, fmt.Errorf("「%s」暂不支持发送验证码，请选择其他方式", name)
+	}
+
+	loginCtx, cancel := context.WithTimeout(context.Background(), 60*time.Second)
+	defer cancel()
+
+	sc := newSessionClient()
+	restoreMFACasSession(sc, mfa)
+
+	// 与当前会话方式不同时先切换（与官方页面 Tab 切换行为一致）
+	if reAuthType != mfa.ReAuthType {
+		if err := changeMFAAuthType(loginCtx, sc.Client, mfa, reAuthType); err != nil {
+			return nil, err
+		}
+		mfa.ReAuthType = reAuthType
+		slog.Info("MFA验证方式已切换", "reAuthType", reAuthType)
+	}
+
+	result, err := postReAuthDynamicCode(loginCtx, sc.Client, mfa, reAuthCodeTypeNames[reAuthType])
+	if err != nil {
+		return nil, err
+	}
+	return &MFASendResult{
+		Mobile:   result.Mobile,
+		CodeTime: result.CodeTime,
+		Message:  orDefault(result.ReturnMessage, "验证码已发送"),
+	}, nil
+}
+
+// mfaHasAuthMethod 判断方式编号是否在可用列表中
+func mfaHasAuthMethod(methods []MFAAuthMethod, reAuthType string) bool {
+	for _, m := range methods {
+		if m.Type == reAuthType {
+			return true
+		}
+	}
+	return false
+}
+
+// CompleteMFALogin 提交用户输入的验证码，完成 MFA 认证并走完 CAS 票据交换，
+// 返回登录成功后的全部 cookies。
+func CompleteMFALogin(ctx context.Context, mfa *MFAContext, code string) ([]*http.Cookie, error) {
+	if mfa == nil || len(mfa.CookiesByHost) == 0 {
+		return nil, fmt.Errorf("%w: 验证会话不存在，请重新登录", ErrMFASessionExpired)
+	}
+
+	loginCtx, cancel := context.WithTimeout(context.Background(), 90*time.Second)
+	defer cancel()
+
+	sc := newSessionClient()
+	// 恢复 CAS 阶段会话
+	restoreMFACasSession(sc, mfa)
+
+	// 1. 提交验证码（reAuthSubmit.do 返回 JSON，不涉及重定向）
+	submitUrl := mfa.BaseURL + mfa.ContextPath + "/reAuthCheck/reAuthSubmit.do"
+	submitResp, err := sc.R().SetContext(loginCtx).
+		SetFormData(map[string]string{
+			"service":       mfa.Service,
+			"reAuthType":    mfa.ReAuthType,
+			"isMultifactor": "true",
+			"password":      "",
+			"dynamicCode":   code,
+			"uuid":          "",
+			"answer1":       "",
+			"answer2":       "",
+			"otpCode":       "",
+		}).
+		Post(submitUrl)
+	if err != nil {
+		return nil, fmt.Errorf("提交MFA验证码失败: %w", err)
+	}
+	body := readBody(submitResp)
+	slog.Info("MFA验证码提交响应", "status", submitResp.StatusCode(), "body", string(body[:min(len(body), 500)]))
+
+	var result struct {
+		Code string `json:"code"`
+		Msg  string `json:"msg"`
+	}
+	_ = json.Unmarshal(body, &result)
+	switch result.Code {
+	case "reAuth_failed":
+		return nil, fmt.Errorf("%s", orDefault(result.Msg, "验证码错误或已过期"))
+	case "reAuth_unauthorized":
+		return nil, fmt.Errorf("%w: %s", ErrMFASessionExpired, orDefault(result.Msg, "验证会话已失效，请重新登录"))
+	}
+
+	// 2. 完成 CAS 票据交换：GET /login?service=... → 302(service?ticket=) → wecloud /iap/loginSuccess
+	exchangeUrl := mfa.BaseURL + mfa.ContextPath + "/login?service=" + url.QueryEscape(mfa.Service)
+	sc.SetRedirectPolicy(resty.FlexibleRedirectPolicy(20))
+	exchangeResp, err := sc.R().SetContext(loginCtx).Get(exchangeUrl)
+	if err != nil {
+		return nil, fmt.Errorf("MFA票据交换失败: %w", err)
+	}
+	_ = exchangeResp
+
+	// 3. 激活 wecloud 会话
+	activateSession(loginCtx, mfa.WecloudUrl, sc.Client)
+
+	cookies := sc.jar.AllCookies()
+	return cookies, nil
+}
+
+// orDefault 空串时取默认值
+func orDefault(s, def string) string {
+	if strings.TrimSpace(s) == "" {
+		return def
+	}
+	return s
+}

backed/internal/service/cpdaily/login_mfa_test.go

@@ -0,0 +1,394 @@
+package cpdaily
+
+import (
+	"context"
+	"errors"
+	"net/http"
+	"net/http/httptest"
+	"strings"
+	"testing"
+)
+
+// ========== MFA 页面「可用验证方式」解析测试 ==========
+
+// 移动端模板样本（结构取自真实 MFA 页面，已脱敏）
+const mfaMobilePageSample = `<!DOCTYPE html><html><body>
+<script>var reAuthParams = {
+"reAuthType":"5",
+"isMultifactor":"true",
+"service":"https:\/\/school.campusphere.net\/iap\/loginSuccess?sessionToken=test-token",
+"reAuthUserId":"20220000000"
+};</script>
+<div class="mobile-reauth-tab-list" id="mobileTabList">
+<div class="mobile-reauth-tab-item mobile-reauth-tab-active" id="mobile_tab_5"
+onclick="handleMobileTabClick(this)" data-type="5" data-index="0">
+<span class="mobile-reauth-tab-text" title="今日校园验证码">今日校园验证码</span>
+</div>
+<div class="mobile-reauth-tab-item" id="mobile_tab_11" onclick="handleMobileTabClick(this)" data-type="11" data-index="1">
+<span class="mobile-reauth-tab-text" title="邮箱验证">邮箱验证</span>
+</div>
+</div>
+</body></html>`
+
+func TestParseMFAAuthMethodsMobileTabs(t *testing.T) {
+	methods := parseMFAAuthMethods(mfaMobilePageSample)
+	if len(methods) != 2 {
+		t.Fatalf("期望解析出 2 个方式，实际 %d: %+v", len(methods), methods)
+	}
+	if methods[0].Type != "5" || methods[0].Name != "今日校园验证码" || !methods[0].Default {
+		t.Errorf("第 1 项解析错误: %+v", methods[0])
+	}
+	if methods[1].Type != "11" || methods[1].Name != "邮箱验证" || methods[1].Default {
+		t.Errorf("第 2 项解析错误: %+v", methods[1])
+	}
+}
+
+func TestParseMFAAuthMethodsNewLayoutWithMoreMenu(t *testing.T) {
+	page := `<html><body>
+<div class="reauth-tab-item reauth-tab-active" id="tab_13" data-type="13"></div>
+<div class="reauth-tab-item" id="tab_3" data-type="3"></div>
+<a class="reauth-tab-more-item" id="10">OTP</a>
+</body></html>`
+	methods := parseMFAAuthMethods(page)
+	if len(methods) != 3 {
+		t.Fatalf("期望解析出 3 个方式，实际 %d: %+v", len(methods), methods)
+	}
+	if methods[0].Type != "13" || !methods[0].Default || methods[0].Name != "WeLink验证码" {
+		t.Errorf("第 1 项解析错误（应取 data-type、active 标记、兜底名）: %+v", methods[0])
+	}
+	if methods[1].Type != "3" || methods[1].Name != "短信验证码" {
+		t.Errorf("第 2 项解析错误: %+v", methods[1])
+	}
+	if methods[2].Type != "10" || methods[2].Name != "OTP" {
+		t.Errorf("更多菜单项解析错误（id 即编号、文本即名字）: %+v", methods[2])
+	}
+}
+
+func TestParseMFAAuthMethodsLegacyLayout(t *testing.T) {
+	page := `<html><body>
+<div class="changeReAuthTypes" id="3"></div>
+<div class="changeReAuthTypes" id="10"></div>
+</body></html>`
+	methods := parseMFAAuthMethods(page)
+	if len(methods) != 2 {
+		t.Fatalf("期望解析出 2 个方式，实际 %d: %+v", len(methods), methods)
+	}
+	if methods[0].Type != "3" || methods[1].Type != "10" {
+		t.Errorf("旧版列表解析错误: %+v", methods)
+	}
+}
+
+// 许昌学院 xcuTheme：「选择认证方式」弹窗（结构取自真实 MFA 页面，已脱敏）
+const mfaOtherTypeDialogPageSample = `<html><body>
+<script>var reAuthParams = {
+"reAuthType":"3",
+"isMultifactor":"true",
+"service":"https:\/\/xcu.campusphere.net\/iap\/loginSuccess?sessionToken=test-token",
+"reAuthUserId":"5810260823"
+};</script>
+<div id="other_dialog">
+	<div class="mask changeOtherType"></div>
+	<div class="dialog-reAuth changeOtherType" id="changeOtherType">
+		<div class="other_type_title other_type_header_title">选择认证方式</div>
+		<div id="3" class="other_type_button" onclick="changeMobileReAuthType(this)">短信验证码</div>
+		<div class="other_type_title cancel_bottom_btn" onclick="mobileChangeTypeCancel();">取消</div>
+	</div>
+</div>
+</body></html>`
+
+func TestParseMFAAuthMethodsOtherTypeDialog(t *testing.T) {
+	methods := parseMFAAuthMethods(mfaOtherTypeDialogPageSample)
+	if len(methods) != 1 {
+		t.Fatalf("弹窗方式列表应解析出 1 个方式，实际 %d: %+v", len(methods), methods)
+	}
+	if methods[0].Type != "3" || methods[0].Name != "短信验证码" {
+		t.Errorf("弹窗方式解析错误（id 即编号、文本即名字）: %+v", methods[0])
+	}
+}
+
+func TestParseMFAAuthMethodsOtherTypeDialogMulti(t *testing.T) {
+	// 多方式弹窗：标题不应被误解析，仅 .other_type_button 计入
+	page := `<html><body>
+<div class="dialog-reAuth changeOtherType" id="changeOtherType">
+	<div class="other_type_title other_type_header_title">选择认证方式</div>
+	<div id="3" class="other_type_button">短信验证码</div>
+	<div id="11" class="other_type_button">邮箱验证</div>
+	<div class="other_type_title cancel_bottom_btn">取消</div>
+</div>
+</body></html>`
+	methods := parseMFAAuthMethods(page)
+	if len(methods) != 2 {
+		t.Fatalf("期望解析出 2 个方式，实际 %d: %+v", len(methods), methods)
+	}
+	if methods[0].Type != "3" || methods[0].Name != "短信验证码" || methods[1].Type != "11" || methods[1].Name != "邮箱验证" {
+		t.Errorf("多方式弹窗解析错误: %+v", methods)
+	}
+}
+
+func TestParseMFAAuthMethodsDedupeAcrossLayouts(t *testing.T) {
+	// 同一方式同时出现在 Tab 与弹窗时应去重（保留先出现项）
+	page := `<html><body>
+<div class="reauth-tab-item" id="tab_3" data-type="3"></div>
+<div class="other_type_button" id="3">短信验证码</div>
+</body></html>`
+	methods := parseMFAAuthMethods(page)
+	if len(methods) != 1 || methods[0].Type != "3" {
+		t.Fatalf("跨布局重复方式应去重，实际: %+v", methods)
+	}
+}
+
+func TestParseMFAAuthMethodsIgnoresComments(t *testing.T) {
+	page := `<html><body>
+<!-- <div class="mobile-reauth-tab-item" data-type="9"><span class="mobile-reauth-tab-text">QQ扫码</span></div> -->
+<div class="mobile-reauth-tab-item" data-type="5"><span class="mobile-reauth-tab-text">今日校园验证码</span></div>
+</body></html>`
+	methods := parseMFAAuthMethods(page)
+	if len(methods) != 1 || methods[0].Type != "5" {
+		t.Fatalf("注释块内的方式不应被解析，实际: %+v", methods)
+	}
+}
+
+func TestParseMFAAuthMethodsEmptyPage(t *testing.T) {
+	if methods := parseMFAAuthMethods("<html><body><p>no tabs</p></body></html>"); len(methods) != 0 {
+		t.Fatalf("无方式列表的页面应返回空，实际: %+v", methods)
+	}
+}
+
+// ========== 方式列表规范化测试 ==========
+
+func TestNormalizeMFAAuthMethodsFiltersNonDynamicCode(t *testing.T) {
+	in := []MFAAuthMethod{
+		{Type: "2", Name: "密码验证"},
+		{Type: "5", Name: "今日校园验证码"},
+		{Type: "11", Name: "邮箱验证"},
+		{Type: "10", Name: "安全令牌OTP"},
+	}
+	out := normalizeMFAAuthMethods(in, "5")
+	if len(out) != 2 || out[0].Type != "5" || out[1].Type != "11" {
+		t.Fatalf("应过滤到仅动态码方式 [5,11]，实际: %+v", out)
+	}
+	if !out[0].Default || out[1].Default {
+		t.Errorf("默认项标记错误: %+v", out)
+	}
+}
+
+func TestNormalizeMFAAuthMethodsKeepsAllWhenNoDynamicCode(t *testing.T) {
+	in := []MFAAuthMethod{
+		{Type: "2", Name: "密码验证"},
+		{Type: "6", Name: "实人认证"},
+	}
+	out := normalizeMFAAuthMethods(in, "2")
+	if len(out) != 2 {
+		t.Fatalf("全为非动态码时应保留原列表，实际: %+v", out)
+	}
+	if !out[0].Default {
+		t.Errorf("应按 defaultType 标记默认项: %+v", out)
+	}
+}
+
+func TestNormalizeMFAAuthMethodsDefaultFallbacks(t *testing.T) {
+	// 页面未标记默认 + defaultType 匹配第二项
+	in := []MFAAuthMethod{
+		{Type: "5", Name: "Today"},
+		{Type: "11", Name: "Email"},
+	}
+	out := normalizeMFAAuthMethods(in, "11")
+	if !out[1].Default || out[0].Default {
+		t.Fatalf("defaultType=11 应标记第二项: %+v", out)
+	}
+	// defaultType 不在列表时标记首项
+	in2 := []MFAAuthMethod{
+		{Type: "5", Name: "Today"},
+		{Type: "3", Name: "SMS"},
+	}
+	out2 := normalizeMFAAuthMethods(in2, "9")
+	if !out2[0].Default {
+		t.Fatalf("defaultType 不在列表时应标记首项: %+v", out2)
+	}
+}
+
+func TestNormalizeMFAAuthMethodsEmptyListFallback(t *testing.T) {
+	// 页面无 Tab / 解析失败且当前方式支持动态码：用当前方式兜底为唯一选项，避免前端无可选
+	out := normalizeMFAAuthMethods(nil, "5")
+	if len(out) != 1 || out[0].Type != "5" || out[0].Name != "今日校园验证码" || !out[0].Default {
+		t.Fatalf("空列表应按 reAuthType=5 兜底为唯一选项，实际: %+v", out)
+	}
+	// 当前方式不支持动态码（如实人认证）时不造选项，保持空
+	if out := normalizeMFAAuthMethods(nil, "6"); len(out) != 0 {
+		t.Fatalf("非动态码方式不应兜底，实际: %+v", out)
+	}
+	// defaultType 为空同样不猜测
+	if out := normalizeMFAAuthMethods(nil, ""); len(out) != 0 {
+		t.Fatalf("defaultType 为空不应兜底，实际: %+v", out)
+	}
+}
+
+// ========== SendMFADynamicCode 全流程测试（mock CAS 服务器） ==========
+
+func TestSendMFADynamicCode(t *testing.T) {
+	var (
+		changeCalled bool
+		changeForm   map[string]string
+		codeForm     map[string]string
+		changeResp   = `{"code":1,"data":{"reAuthType":"11"}}`
+		codeResp     = `{"res":"other_success","returnMessage":"验证码已发送成功!","mobile":"138****0000","codeTime":120}`
+	)
+	server := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		w.Header().Set("Content-Type", "application/json")
+		switch r.URL.Path {
+		case "/authserver/reAuthCheck/changeReAuthType.do":
+			changeCalled = true
+			_ = r.ParseForm()
+			changeForm = map[string]string{
+				"isMultifactor": r.Form.Get("isMultifactor"),
+				"reAuthType":    r.Form.Get("reAuthType"),
+				"service":       r.Form.Get("service"),
+			}
+			_, _ = w.Write([]byte(changeResp))
+		case "/authserver/dynamicCode/getDynamicCodeByReauth.do":
+			_ = r.ParseForm()
+			codeForm = map[string]string{
+				"userName":         r.Form.Get("userName"),
+				"authCodeTypeName": r.Form.Get("authCodeTypeName"),
+			}
+			_, _ = w.Write([]byte(codeResp))
+		default:
+			http.NotFound(w, r)
+		}
+	}))
+	defer server.Close()
+	host := strings.TrimPrefix(server.URL, "http://")
+
+	newMFA := func() *MFAContext {
+		return &MFAContext{
+			BaseURL:     server.URL,
+			ContextPath: "/authserver",
+			Service:     "https://school.campusphere.net/iap/loginSuccess?sessionToken=t",
+			ReAuthType:  "5",
+			UserID:      "20220000000",
+			AuthMethods: []MFAAuthMethod{
+				{Type: "5", Name: "今日校园验证码", Default: true},
+				{Type: "11", Name: "邮箱验证"},
+			},
+			CookiesByHost: map[string][]*http.Cookie{
+				host: {{Name: "CASTGC", Value: "TGT-test"}},
+			},
+		}
+	}
+	reset := func() {
+		changeCalled = false
+		changeForm = nil
+		codeForm = nil
+		changeResp = `{"code":1,"data":{"reAuthType":"11"}}`
+		codeResp = `{"res":"other_success","returnMessage":"验证码已发送成功!","mobile":"138****0000","codeTime":120}`
+	}
+
+	t.Run("切换到新方式并发送", func(t *testing.T) {
+		reset()
+		mfa := newMFA()
+		result, err := SendMFADynamicCode(context.Background(), mfa, "11")
+		if err != nil {
+			t.Fatalf("发送失败: %v", err)
+		}
+		if !changeCalled {
+			t.Error("选择了与默认不同的方式，应先调用 changeReAuthType.do")
+		}
+		if changeForm["isMultifactor"] != "true" || changeForm["reAuthType"] != "11" || changeForm["service"] != mfa.Service {
+			t.Errorf("切换参数错误: %+v", changeForm)
+		}
+		if codeForm["authCodeTypeName"] != "reAuthEmailDynamicCodeType" || codeForm["userName"] != "20220000000" {
+			t.Errorf("发码参数错误: %+v", codeForm)
+		}
+		if result.Mobile != "138****0000" || result.CodeTime != 120 || result.Message != "验证码已发送成功!" {
+			t.Errorf("发码结果解析错误: %+v", result)
+		}
+		if mfa.ReAuthType != "11" {
+			t.Errorf("发送成功后应同步 ReAuthType=11，实际 %s", mfa.ReAuthType)
+		}
+	})
+
+	t.Run("沿用默认方式不切换", func(t *testing.T) {
+		reset()
+		mfa := newMFA()
+		_, err := SendMFADynamicCode(context.Background(), mfa, "5")
+		if err != nil {
+			t.Fatalf("发送失败: %v", err)
+		}
+		if changeCalled {
+			t.Error("选择与默认相同的方式不应调用 changeReAuthType.do")
+		}
+		if codeForm["authCodeTypeName"] != "reAuthCpdailyDynamicCodeType" {
+			t.Errorf("发码参数错误: %+v", codeForm)
+		}
+	})
+
+	t.Run("切换响应 code 为字符串1也兼容", func(t *testing.T) {
+		reset()
+		changeResp = `{"code":"1","data":{"reAuthType":"11"}}`
+		mfa := newMFA()
+		if _, err := SendMFADynamicCode(context.Background(), mfa, "11"); err != nil {
+			t.Fatalf("字符串 code=1 应视为切换成功，实际报错: %v", err)
+		}
+	})
+
+	t.Run("不在可用列表的方式被拒绝", func(t *testing.T) {
+		reset()
+		mfa := newMFA()
+		if _, err := SendMFADynamicCode(context.Background(), mfa, "2"); err == nil {
+			t.Fatal("不在列表中的方式应报错")
+		}
+	})
+
+	t.Run("列表内非动态码方式被拒绝", func(t *testing.T) {
+		reset()
+		mfa := newMFA()
+		mfa.AuthMethods = append(mfa.AuthMethods, MFAAuthMethod{Type: "6", Name: "实人认证"})
+		_, err := SendMFADynamicCode(context.Background(), mfa, "6")
+		if err == nil || !strings.Contains(err.Error(), "暂不支持发送验证码") {
+			t.Fatalf("非动态码方式应明确报错，实际: %v", err)
+		}
+	})
+
+	t.Run("会话缺失返回过期错误", func(t *testing.T) {
+		reset()
+		mfa := newMFA()
+		mfa.CookiesByHost = nil
+		_, err := SendMFADynamicCode(context.Background(), mfa, "5")
+		if !errors.Is(err, ErrMFASessionExpired) {
+			t.Fatalf("会话缺失应返回 ErrMFASessionExpired，实际: %v", err)
+		}
+	})
+
+	t.Run("发码失败透传服务端文案", func(t *testing.T) {
+		reset()
+		codeResp = `{"res":"fail","returnMessage":"发送过于频繁，请稍后再试"}`
+		mfa := newMFA()
+		_, err := SendMFADynamicCode(context.Background(), mfa, "5")
+		if err == nil || !strings.Contains(err.Error(), "发送过于频繁") {
+			t.Fatalf("应透传服务端失败文案，实际: %v", err)
+		}
+	})
+
+	t.Run("倒计时未结束视为已发送", func(t *testing.T) {
+		reset()
+		codeResp = `{"res":"code_time_fail","returnMessage":"验证码已发送，请勿重复获取","codeTime":60}`
+		mfa := newMFA()
+		result, err := SendMFADynamicCode(context.Background(), mfa, "5")
+		if err != nil {
+			t.Fatalf("code_time_fail 应视为发送成功: %v", err)
+		}
+		if result.CodeTime != 60 {
+			t.Errorf("应回传倒计时秒数，实际: %+v", result)
+		}
+	})
+
+	t.Run("会话失效错误码映射为过期", func(t *testing.T) {
+		reset()
+		codeResp = `{"res":"fail","errCode":"206302","returnMessage":"会话失效"}`
+		mfa := newMFA()
+		_, err := SendMFADynamicCode(context.Background(), mfa, "5")
+		if !errors.Is(err, ErrMFASessionExpired) {
+			t.Fatalf("errCode=206302 应映射为 ErrMFASessionExpired，实际: %v", err)
+		}
+	})
+}

backed/internal/service/cpdaily/login_xcu.go

@@ -0,0 +1,40 @@
+package cpdaily
+
+import (
+	"context"
+	"net/http"
+	"strings"
+)
+
+// ========== 许昌学院（xcu）单独适配 ==========
+
+// XcuSchoolId 许昌学院 tenant id
+const XcuSchoolId = "xcu"
+
+// xcuCasLoginEntry 计算许昌学院 CAS 登录入口：
+// 校园网关的 /portal/login 会 302 到学校 CAS（authserver.xcu.edu.cn），并在 service 中
+// 携带网关回调（/iap/loginSuccess?sessionToken=...）；走完 CAS 账密 + MFA 后回调该地址，
+// cookie 才能正确落在 xcu.campusphere.net 域（wec-* 任务接口所在域，activateSession 依赖）。
+// WecloudUrl 缺失时回退用学校 ampUrl（仅保证能走通 CAS 账密 + MFA）。
+func xcuCasLoginEntry(school *SchoolDetailInfo) string {
+	if school == nil {
+		return ""
+	}
+	if school.WecloudUrl != "" {
+		return strings.TrimSuffix(school.WecloudUrl, "/") + "/portal/login"
+	}
+	return school.AmpUrl
+}
+
+// xcuCasLogin 许昌学院强制走 CAS：
+// 平台接口返回 joinType=CLOUD（IsIap()=true），但其 IAP 账密接口 /iap/doLogin 与通用
+// IAP 密码加密格式不兼容（实测 RSA hex/base64 等多种编码均返回 FAIL_UPNOTMATCH）；
+// 实际登录链路为 IAP 入口 302 → 学校 CAS 账密 → MFA → 回调 /iap/loginSuccess 建立网关会话。
+// 因此不走通用 IAP 流程，强制用 CAS 流程并从校园网关入口进入（详见 xcuCasLoginEntry）。
+func xcuCasLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, *MFAContext, error) {
+	xcu := *school
+	if entry := xcuCasLoginEntry(school); entry != "" {
+		xcu.AmpUrl = entry
+	}
+	return casLogin(ctx, &xcu, username, password)
+}

backed/internal/service/cpdaily/login_xcu_test.go

@@ -0,0 +1,69 @@
+package cpdaily
+
+import "testing"
+
+// TestXcuCasLoginEntry 覆盖许昌学院 CAS 登录入口计算逻辑
+func TestXcuCasLoginEntry(t *testing.T) {
+	cases := []struct {
+		name   string
+		school *SchoolDetailInfo
+		want   string
+	}{
+		{
+			name:   "正常wecloud",
+			school: &SchoolDetailInfo{WecloudUrl: "https://xcu.campusphere.net"},
+			want:   "https://xcu.campusphere.net/portal/login",
+		},
+		{
+			name:   "wecloud带尾斜杠",
+			school: &SchoolDetailInfo{WecloudUrl: "https://xcu.campusphere.net/"},
+			want:   "https://xcu.campusphere.net/portal/login",
+		},
+		{
+			name: "wecloud缺失回退ampUrl",
+			school: &SchoolDetailInfo{
+				AmpUrl: "https://casp.xcu.edu.cn/newmobile/client",
+			},
+			want: "https://casp.xcu.edu.cn/newmobile/client",
+		},
+		{
+			name:   "均为空",
+			school: &SchoolDetailInfo{},
+			want:   "",
+		},
+		{
+			name:   "nil学校",
+			school: nil,
+			want:   "",
+		},
+	}
+	for _, c := range cases {
+		t.Run(c.name, func(t *testing.T) {
+			if got := xcuCasLoginEntry(c.school); got != c.want {
+				t.Errorf("xcuCasLoginEntry() = %q, want %q", got, c.want)
+			}
+		})
+	}
+}
+
+// TestXcuCasLoginEntryOverridesAmpUrl 确认 xcuCasLogin 用网关入口覆盖 ampUrl 后走 CAS 流程
+func TestXcuCasLoginEntryOverridesAmpUrl(t *testing.T) {
+	school := &SchoolDetailInfo{
+		ID:         XcuSchoolId,
+		Name:       "许昌学院",
+		JoinType:   "CLOUD",
+		IdsUrl:     "https://authserver.xcu.edu.cn/authserver",
+		WecloudUrl: "https://xcu.campusphere.net",
+		AmpUrl:     "https://casp.xcu.edu.cn/newmobile/client",
+	}
+	// 模拟 xcuCasLogin 内部的入口覆盖（不发起网络请求）
+	clone := *school
+	clone.AmpUrl = xcuCasLoginEntry(school)
+	if got := getCasValidLoginUrl(&clone); got != "https://xcu.campusphere.net/portal/login" {
+		t.Errorf("getCasValidLoginUrl() = %q, want 网关入口", got)
+	}
+	// 原对象不被修改
+	if school.AmpUrl != "https://casp.xcu.edu.cn/newmobile/client" {
+		t.Errorf("原 school 对象 ampUrl 被意外修改: %q", school.AmpUrl)
+	}
+}

backed/internal/service/cpdaily/qrcode.go

@@ -0,0 +1,151 @@
+package cpdaily
+
+import (
+	"bytes"
+	"encoding/base64"
+	"fmt"
+	"image"
+	_ "image/gif"
+	_ "image/jpeg"
+	_ "image/png"
+	"regexp"
+	"strings"
+	"time"
+
+	"github.com/go-resty/resty/v2"
+	"github.com/makiuchi-d/gozxing"
+	"github.com/makiuchi-d/gozxing/qrcode"
+	"golang.org/x/image/draw"
+	_ "golang.org/x/image/webp"
+)
+
+// qrUuidPattern 匹配二维码内容中的 uuid 参数（如 ...?uuid=1583a6...&isNeedExtra=0）
+var qrUuidPattern = regexp.MustCompile(`uuid=([0-9a-zA-Z_-]+)`)
+
+// bareUuidPattern 匹配纯 uuid（32 位十六进制字符串，如 1583a66272854585833eb13b56fc1937）
+var bareUuidPattern = regexp.MustCompile(`^[0-9a-fA-F]{32}$`)
+
+// bareTokenPattern 匹配"整串即 uuid 的裸值"，用于存库后回读的场景。
+// 链接里的 uuid 允许 [0-9a-zA-Z_-]+（见 qrUuidPattern），并非都是 32 位 hex，
+// 因此仅靠 bareUuidPattern 无法反解非 hex 的 uuid，会导致签到失败。
+// 长度限制 8~64 且不含空白/URL 符号，避免把普通文本误判为 uuid。
+var bareTokenPattern = regexp.MustCompile(`^[0-9a-zA-Z_-]{8,64}$`)
+
+// ExtractQrUuid 从二维码文本内容中提取签到二维码 uuid。
+// 支持三种形式：完整链接（取 uuid= 参数值）、32 位 hex 裸 uuid、其它形式的裸 uuid token。
+func ExtractQrUuid(text string) string {
+	text = strings.TrimSpace(text)
+	if text == "" {
+		return ""
+	}
+	if m := qrUuidPattern.FindStringSubmatch(text); len(m) == 2 {
+		return m[1]
+	}
+	if bareUuidPattern.MatchString(text) {
+		return strings.ToLower(text)
+	}
+	if bareTokenPattern.MatchString(text) {
+		return text
+	}
+	return ""
+}
+
+// DecodeQRFromImage 解码图片数据中的二维码，返回其中文本内容。
+// 先直接解码，失败后放大图片重试（应对小尺寸/低分辨率截图）。
+func DecodeQRFromImage(data []byte) (string, error) {
+	img, _, err := image.Decode(bytes.NewReader(data))
+	if err != nil {
+		return "", fmt.Errorf("识别图片格式失败: %w", err)
+	}
+
+	text, err := decodeQRImage(img)
+	if err == nil {
+		return text, nil
+	}
+	// 放大 3 倍重试
+	if text, err2 := decodeQRImage(scaleImage(img, 3)); err2 == nil {
+		return text, nil
+	}
+	return "", fmt.Errorf("未能识别图片中的二维码: %w", err)
+}
+
+func decodeQRImage(img image.Image) (string, error) {
+	bmp, err := gozxing.NewBinaryBitmapFromImage(img)
+	if err != nil {
+		return "", err
+	}
+	hints := map[gozxing.DecodeHintType]interface{}{
+		gozxing.DecodeHintType_TRY_HARDER: true,
+	}
+	result, err := qrcode.NewQRCodeReader().Decode(bmp, hints)
+	if err != nil {
+		return "", err
+	}
+	return result.GetText(), nil
+}
+
+// scaleImage 将图片按整数倍放大（用于提高小图二维码的识别率）
+func scaleImage(img image.Image, factor int) image.Image {
+	b := img.Bounds()
+	dst := image.NewRGBA(image.Rect(0, 0, b.Dx()*factor, b.Dy()*factor))
+	draw.CatmullRom.Scale(dst, dst.Bounds(), img, b, draw.Over, nil)
+	return dst
+}
+
+// ResolveQrUuidFromContent 从用户提供的二维码内容中解析出签到 uuid。
+// 支持三种形式：
+//  1. 文本直填（二维码链接或纯 uuid）
+//  2. base64 图片（dataURI，前端上传的本地预览图）
+//  3. http(s) 图片链接（下载后解码）
+func ResolveQrUuidFromContent(content string) (string, error) {
+	content = strings.TrimSpace(content)
+	if content == "" {
+		return "", fmt.Errorf("尚未上传签到二维码")
+	}
+
+	// 1) 内容本身已是文本（链接或 uuid），直接提取
+	if uuid := ExtractQrUuid(content); uuid != "" {
+		return uuid, nil
+	}
+
+	// 2) base64 图片（dataURI）
+	if IsDataURIImage(content) {
+		idx := strings.Index(content, ",")
+		if idx < 0 {
+			return "", fmt.Errorf("二维码图片数据格式不正确")
+		}
+		imgBytes, err := base64.StdEncoding.DecodeString(content[idx+1:])
+		if err != nil {
+			return "", fmt.Errorf("解码二维码图片失败: %w", err)
+		}
+		return decodeQrTextToUuid(imgBytes)
+	}
+
+	// 3) http(s) 图片链接：下载后解码
+	if strings.HasPrefix(content, "http://") || strings.HasPrefix(content, "https://") {
+		client := resty.New().SetTimeout(30 * time.Second)
+		resp, err := client.R().
+			SetHeader("User-Agent", "Mozilla/5.0 (Linux; Android 15) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/131.0.6778.81 Mobile Safari/537.36").
+			Get(content)
+		if err != nil {
+			return "", fmt.Errorf("下载二维码图片失败: %w", err)
+		}
+		if resp.StatusCode() > 299 {
+			return "", fmt.Errorf("下载二维码图片失败(HTTP %d)", resp.StatusCode())
+		}
+		return decodeQrTextToUuid(resp.Body())
+	}
+
+	return "", fmt.Errorf("无法识别的二维码内容，请上传二维码图片或粘贴二维码链接")
+}
+
+func decodeQrTextToUuid(imgBytes []byte) (string, error) {
+	text, err := DecodeQRFromImage(imgBytes)
+	if err != nil {
+		return "", err
+	}
+	if uuid := ExtractQrUuid(text); uuid != "" {
+		return uuid, nil
+	}
+	return "", fmt.Errorf("二维码内容中未找到 uuid: %s", text)
+}

backed/internal/service/cpdaily/qrcode_test.go

@@ -0,0 +1,67 @@
+package cpdaily
+
+import (
+	"encoding/base64"
+	"os"
+	"testing"
+)
+
+const testQrUuid = "1583a66272854585833eb13b56fc1937"
+
+func TestExtractQrUuid(t *testing.T) {
+	cases := []struct{ in, want string }{
+		{"https://ynu.campusphere.net/wec-counselor-sign-apps/stu/qrsign/index.html?uuid=1583a66272854585833eb13b56fc1937&isNeedExtra=0&schoolId=1018615911902606", "1583a66272854585833eb13b56fc1937"},
+		{"1583a66272854585833eb13b56fc1937", "1583a66272854585833eb13b56fc1937"},
+		{"  xxxxx?uuid=abc123XYZ&y=1  ", "abc123XYZ"},
+		{"no uuid here", ""},
+		{"", ""},
+		// 裸 uuid 回读（formData 只存 uuid 后的解析路径）
+		{"abc123XYZ", "abc123XYZ"},                                // 非 32-hex 的裸 uuid
+		{"1583a66272854585833eb13b56fc1937", "1583a66272854585833eb13b56fc1937"}, // 32-hex
+		{"uuid_with-dash", "uuid_with-dash"},                      // 含 _ 和 -
+		{"ab", ""},                                                // 太短，不认为是 uuid
+		{"has space x", ""},                                       // 含空白，不认为是 uuid
+		{"https://x.edu.cn/a/b", ""},                              // URL 含符号，不走裸 token 分支
+	}
+	for _, c := range cases {
+		if got := ExtractQrUuid(c.in); got != c.want {
+			t.Errorf("ExtractQrUuid(%q) = %q, want %q", c.in, got, c.want)
+		}
+	}
+}
+
+func TestResolveQrUuidFromLinkText(t *testing.T) {
+	uuid, err := ResolveQrUuidFromContent("https://ynu.campusphere.net/wec-counselor-sign-apps/stu/qrsign/index.html?uuid=1583a66272854585833eb13b56fc1937&isNeedExtra=0")
+	if err != nil || uuid != testQrUuid {
+		t.Fatalf("link text resolve = (%q, %v), want (%q, nil)", uuid, err, testQrUuid)
+	}
+	if _, err := ResolveQrUuidFromContent(""); err == nil {
+		t.Fatal("empty content should return error")
+	}
+	if _, err := ResolveQrUuidFromContent("some random text"); err == nil {
+		t.Fatal("unrecognized content should return error")
+	}
+}
+
+func TestDecodeQrImageAndResolve(t *testing.T) {
+	imgBytes, err := os.ReadFile("testdata/test_qr.png")
+	if err != nil {
+		t.Fatalf("read test qr image: %v", err)
+	}
+
+	// 1) 直接解码图片中的二维码
+	text, err := DecodeQRFromImage(imgBytes)
+	if err != nil {
+		t.Fatalf("decode qr image: %v", err)
+	}
+	if got := ExtractQrUuid(text); got != testQrUuid {
+		t.Fatalf("decoded text %q -> uuid %q, want %q", text, got, testQrUuid)
+	}
+
+	// 2) dataURI 形式（前端本地上传的图片）
+	dataURI := "data:image/png;base64," + base64.StdEncoding.EncodeToString(imgBytes)
+	uuid, err := ResolveQrUuidFromContent(dataURI)
+	if err != nil || uuid != testQrUuid {
+		t.Fatalf("dataURI resolve = (%q, %v), want (%q, nil)", uuid, err, testQrUuid)
+	}
+}

backed/internal/service/cpdaily/service.go

@@ -157,27 +157,47 @@ func hasUsableLoginUrl(school *SchoolDetailInfo) bool {
 }
 
 // CpdailyLogin 执行 cpdaily 登录
-// 返回登录成功后的所有 cookies
-func CpdailyLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, error) {
+// 返回登录成功后的所有 cookies；若触发多因子认证(MFA)，返回 (nil, mfaCtx, ErrMFARequired)，
+// 调用方应暂存 mfaCtx 并引导用户完成验证码校验（CompleteMFALogin）。
+func CpdailyLogin(ctx context.Context, school *SchoolDetailInfo, username, password string) ([]*http.Cookie, *MFAContext, error) {
 	// 南昌理工学院：自研 CAS→IAP 混合认证，与通用 IAP/CAS 流程均不兼容，单独适配
 	if school.ID == NutSchoolId {
-		return nutCasIapLogin(ctx, school, username, password)
+		cookies, err := nutCasIapLogin(ctx, school, username, password)
+		return cookies, nil, err
 	}
 	// 合肥师范学院：学校统一身份认证 SSO 会拒绝单点登录跳转（"系统拒绝单点登录跳转"），
 	// 但其 wecloud 网关（hfnu.campusphere.net）支持标准 IAP 账密登录，单独走 IAP
 	if school.ID == HfnuSchoolId {
-		return iapLogin(ctx, school, username, password)
+		cookies, err := iapLogin(ctx, school, username, password)
+		return cookies, nil, err
+	}
+	// 许昌学院：平台配置 joinType=CLOUD（IsIap=true），但 IAP 账密登录实际不兼容；
+	// 学校真实链路为 CAS 账密 + MFA + /iap/loginSuccess 回调，单独强制走 CAS（详见 login_xcu.go）
+	if school.ID == XcuSchoolId {
+		return xcuCasLogin(ctx, school, username, password)
+	}
+	// 辽宁工程技术大学：平台配置 joinType=CLOUD（IsIap=true），但网关 /iap/doLogin 不存在（405），
+	// IAP 提交报 FAIL_UPNOTMATCH 误导为"密码错误"；实际链路为 /iap 302 → 学校 CAS（authserver.lntu.edu.cn）
+	// → 回调 /iap/loginSuccess 建立网关会话，同 xcu 模式单独强制走 CAS（详见 login_lntu.go）
+	if school.ID == LntuSchoolId {
+		return lntuCasLogin(ctx, school, username, password)
+	}
+	// 华侨大学：写死强制走通用 CAS 流程——CAS 账密登录需 wisedu 定制滑块验证码
+	//（casLogin 内按 sliderIds 配置分流，见 slider.go），IAP 账密接口不兼容（FAIL_UPNOTMATCH）
+	if school.ID == HquSchoolId {
+		return casLogin(ctx, school, username, password)
 	}
 	if school.IsIap() || iapSchoolIds[school.ID] {
 		if !hasUsableLoginUrl(school) {
 			slog.Warn("IAP学校缺少登录地址", "school", school.Name, "schoolId", school.ID)
-			return nil, fmt.Errorf("该校登录配置不完整（缺少登录地址），暂不支持自动登录，请稍后重试或提交待适配反馈")
+			return nil, nil, fmt.Errorf("该校登录配置不完整（缺少登录地址），暂不支持自动登录，请稍后重试或提交待适配反馈")
 		}
-		return iapLogin(ctx, school, username, password)
+		cookies, err := iapLogin(ctx, school, username, password)
+		return cookies, nil, err
 	}
 	if !hasUsableLoginUrl(school) {
 		slog.Warn("CAS学校缺少登录地址", "school", school.Name, "schoolId", school.ID)
-		return nil, fmt.Errorf("该校暂未开放自动登录（待适配），请稍后重试或提交待适配反馈")
+		return nil, nil, fmt.Errorf("该校暂未开放自动登录（待适配），请稍后重试或提交待适配反馈")
 	}
 	return casLogin(ctx, school, username, password)
 }

backed/internal/service/cpdaily/slider.go

@@ -0,0 +1,341 @@
+package cpdaily
+
+import (
+	"context"
+	"crypto/aes"
+	"crypto/cipher"
+	"crypto/rand"
+	"encoding/base64"
+	"encoding/json"
+	"fmt"
+	"log/slog"
+	"strings"
+	"time"
+
+	"cpdaily-new/internal/config"
+
+	"github.com/go-resty/resty/v2"
+)
+
+// HquSchoolId 华侨大学 tenant id（CAS 登录需 wisedu 滑块验证码，IAP 账密接口不兼容）
+const HquSchoolId = "hqdx"
+
+// isSliderCaptchaSchool 判断学校是否为滑块验证码学校（wisedu 定制 CAS 滑块）。
+// 学校列表来自配置 [cpdaily] sliderIds（与老版一致：1018764144934965/sdhyxy/hqdx）。
+func isSliderCaptchaSchool(schoolID string) bool {
+	for _, id := range config.Global.Cpdaily.SliderIds {
+		if id == schoolID {
+			return true
+		}
+	}
+	return false
+}
+
+// ========== 滑块验证码识别（通用方案） ==========
+//
+// 与图片验证码 OCR（captchaOCR）对等的通用识别入口：sliderGapOCR。
+// 打码平台 /slider 接口（与 /classifier 等共用同一个 X-Api-Key）：
+//
+//	POST {captchaBaseUrl}/slider  JSON: {"big_image": "<b64>", "small_image": "<b64>"}
+//	响应: {"code":200,"msg":"success","data":152}
+//	data = 滑块需横向移动的像素距离（wisedu 口径，与服务端 verifySliderCaptcha 期望值同尺度）
+
+// sliderGapOCR 识别滑块缺口横向位置（通用入口）。
+// bigImageB64/smallImageB64 为背景大图与滑块小图的 base64（不带 data: 前缀）。
+// 返回滑块需横向移动的像素距离。
+func sliderGapOCR(bigImageB64, smallImageB64 string) (int, error) {
+	cfg := config.Global.Cpdaily
+	resp, err := resty.New().
+		SetTimeout(15*time.Second).
+		R().
+		SetHeader("X-Api-Key", cfg.CaptchaApiKey).
+		SetHeader("Content-Type", "application/json").
+		SetBody(map[string]string{
+			"big_image":   bigImageB64,
+			"small_image": smallImageB64,
+		}).
+		Post(strings.TrimSuffix(cfg.CaptchaBaseUrl, "/") + "/slider")
+	if err != nil {
+		return 0, fmt.Errorf("滑块识别请求失败: %w", err)
+	}
+
+	var result struct {
+		Code int    `json:"code"`
+		Data int    `json:"data"`
+		Msg  string `json:"msg"`
+	}
+	bodyStr := resp.String()
+	if err := json.Unmarshal([]byte(bodyStr), &result); err != nil {
+		return 0, fmt.Errorf("滑块识别响应解析失败: %w, body: %s", err, bodyStr)
+	}
+	if result.Code != 200 {
+		return 0, fmt.Errorf("滑块识别失败: code=%d msg=%s", result.Code, result.Msg)
+	}
+	if result.Data <= 0 {
+		return 0, fmt.Errorf("滑块识别结果无效: %d", result.Data)
+	}
+	return result.Data, nil
+}
+
+// ========== wisedu CAS 滑块验证码（如华侨大学 id.hqu.edu.cn） ==========
+//
+// 前端协议（longbow sliderCaptcha v2.0 + encrypt.js，2026-02 逆向并实测调通）：
+//
+//  1. GET {cas}/common/openSliderCaptcha.htl
+//     → {"bigImage":"<b64>","smallImage":"<b64>","tagWidth":..,"yHeight":..}
+//  2. safeSecure = window.atob(smallImage) 末 16 字节（latin1→UTF-8 字符串，trim 后作 AES key）
+//  3. 拖动结束后 POST {cas}/common/verifySliderCaptcha.htl，表单仅一个字段 sign：
+//     sign = encryptPassword(JSON.stringify({canvasLength,moveLength,tracks}), safeSecure)
+//     encryptPassword(data,key) = AES-128-CBC-PKCS7（key=Utf8(key.trim())，
+//     iv=randomString(16)，明文=randomString(64)+data），输出标准 base64
+//  4. 响应 {"errorCode":1,"errorMsg":"success"} = 通过；{"errorCode":0} = 失败
+//
+// 服务端校验特性（实测修正，推翻此前「无容差 + ±12 扫描」结论）：
+//   - open 后存在约 1.3~1.7s 的激活延迟：延迟内提交任何值（含真值）都返回失败；
+//   - 激活后服务端接受以真值为中心的宽区间（实测上缘 +8、下缘 -6~-8，相对打码值），
+//     打码平台返回值即为区间中心附近（误差 0±1），故等待激活后提交打码值本身即可通过；
+//   - 失败不消费图片，可在同一张图上反复提交；仅验证成功才作废该图；
+//   - 早期观察到的「打码偏差 -8~+9」为快速扫描跨过激活窗口的落点伪影（非真实识别误差）。
+
+// wiseduSliderVerifyWidth 前端滑块容器宽度（canvasLength 固定上报值）
+const wiseduSliderVerifyWidth = 280
+
+// wiseduAesChars encrypt.js 随机字符集（用于 64 位随机前缀与 16 位随机 IV）
+const wiseduAesChars = "ABCDEFGHJKMNPQRSTWXYZabcdefhijkmnprstwxyz2345678"
+
+// wiseduSliderMaxRounds 换图重试上限（每张图内先提交窄候选序列）
+const wiseduSliderMaxRounds = 5
+
+// wiseduSliderActivateWait 服务端激活延迟等待时长：从 openSliderCaptcha 响应完成起算。
+// 实测激活点约在 open 后 1.3~1.7s（期间提交任何值都被拒），2.5s 留足抖动裕度。
+// 测试可替换为零。
+var wiseduSliderActivateWait = 2500 * time.Millisecond
+
+// wiseduSliderSubmitGap 同图候选值之间的提交间隔，进一步吸收激活窗口抖动。
+// 测试可替换为零。
+var wiseduSliderSubmitGap = 350 * time.Millisecond
+
+// wiseduSliderCandidates 同图候选值偏移序列：以打码值本身为中心（贴合接受区间中心），
+// ±1 仅作识别误差/激活抖动的兜底（激活后接受 ±8 宽区间，通常首个候选即命中）。
+var wiseduSliderCandidates = []int{0, 1, -1}
+
+// wiseduSliderRetryDelay 换图重试等待时长（测试可替换为零延迟）
+var wiseduSliderRetryDelay = func(round int) time.Duration {
+	return time.Duration(500+round*300) * time.Millisecond
+}
+
+// wiseduSliderTrack 前端 tracks 元素（a=横向位移、b=纵向偏移、c=累计时间ms）
+type wiseduSliderTrack struct {
+	A int `json:"a"`
+	B int `json:"b"`
+	C int `json:"c"`
+}
+
+// wiseduSliderTrackPayload verifySliderCaptcha 加密前的 JSON 载荷
+type wiseduSliderTrackPayload struct {
+	CanvasLength int                 `json:"canvasLength"`
+	MoveLength   int                 `json:"moveLength"`
+	Tracks       []wiseduSliderTrack `json:"tracks"`
+}
+
+// resolveWiseduSliderCaptcha 完成 wisedu CAS 滑块验证（自动换图重试）。
+// casBase 为 CAS 根路径（如 https://id.hqu.edu.cn/authserver）；
+// referer 为当前登录页 URL（模拟浏览器请求头）；
+// client 须与登录页共用同一会话（cookie jar）。
+func resolveWiseduSliderCaptcha(ctx context.Context, casBase, referer string, client *resty.Client) error {
+	return resolveWiseduSliderCaptchaFn(ctx, casBase, referer, client, sliderGapOCR)
+}
+
+// resolveWiseduSliderCaptchaFn 允许注入缺口识别函数（测试用）
+func resolveWiseduSliderCaptchaFn(ctx context.Context, casBase, referer string, client *resty.Client,
+	gapFn func(bigImageB64, smallImageB64 string) (int, error)) error {
+	base := strings.TrimSuffix(casBase, "/")
+	var lastErr error
+	for round := 0; round < wiseduSliderMaxRounds; round++ {
+		if round > 0 {
+			time.Sleep(wiseduSliderRetryDelay(round))
+		}
+		lastErr = wiseduSliderOnce(ctx, base, referer, client, gapFn, round)
+		if lastErr == nil {
+			return nil
+		}
+		slog.Info("wisedu滑块本轮失败，换图重试", "round", round+1, "err", lastErr.Error())
+	}
+	return lastErr
+}
+
+// wiseduSliderOnce 单轮滑块验证：取图 → 打码 → 等激活窗口 → 提交窄候选序列（v、v+1、v-1）
+func wiseduSliderOnce(ctx context.Context, base, referer string, client *resty.Client,
+	gapFn func(string, string) (int, error), round int) error {
+	// 1. 获取滑块图片（同会话换图）
+	resp, err := client.R().SetContext(ctx).
+		SetHeader("X-Requested-With", "XMLHttpRequest").
+		SetHeader("Referer", referer).
+		Get(base + "/common/openSliderCaptcha.htl")
+	if err != nil {
+		return fmt.Errorf("获取滑块图片失败: %w", err)
+	}
+	openedAt := time.Now()
+	var slider struct {
+		BigImage   string `json:"bigImage"`
+		SmallImage string `json:"smallImage"`
+	}
+	body := readBody(resp)
+	if err := json.Unmarshal(body, &slider); err != nil || slider.BigImage == "" || slider.SmallImage == "" {
+		return fmt.Errorf("解析滑块图片响应失败: %v, body: %s", err, string(body[:min(len(body), 200)]))
+	}
+
+	// 2. safeSecure（小图末 16 字节）与打码识别
+	safeSecure, err := sliderSafeSecure(slider.SmallImage)
+	if err != nil {
+		return err
+	}
+	gapX, err := gapFn(slider.BigImage, slider.SmallImage)
+	if err != nil {
+		return err
+	}
+
+	// 3. 等待服务端激活窗口：激活前提交任何值（含真值）都会被拒
+	if wait := wiseduSliderActivateWait - time.Since(openedAt); wait > 0 {
+		slog.Info("wisedu滑块等待激活窗口", "round", round+1, "wait", wait.String())
+		time.Sleep(wait)
+	}
+
+	// 4. 提交窄候选序列：打码值本身（接受区间中心），v±1 兜底激活抖动/识别误差
+	for i, off := range wiseduSliderCandidates {
+		if i > 0 && wiseduSliderSubmitGap > 0 {
+			time.Sleep(wiseduSliderSubmitGap)
+		}
+		moveLength := gapX + off
+		if moveLength <= 0 {
+			continue
+		}
+		payload, err := json.Marshal(wiseduSliderTrackPayload{
+			CanvasLength: wiseduSliderVerifyWidth,
+			MoveLength:   moveLength,
+			Tracks:       wiseduSliderTracks(moveLength),
+		})
+		if err != nil {
+			return err
+		}
+		sign, err := encryptSliderSign(string(payload), safeSecure)
+		if err != nil {
+			return err
+		}
+		vResp, err := client.R().SetContext(ctx).
+			SetHeader("X-Requested-With", "XMLHttpRequest").
+			SetHeader("Referer", referer).
+			SetFormData(map[string]string{"sign": sign}).
+			Post(base + "/common/verifySliderCaptcha.htl")
+		if err != nil {
+			return fmt.Errorf("提交滑块校验失败: %w", err)
+		}
+		var vResult struct {
+			ErrorCode int    `json:"errorCode"`
+			ErrorMsg  string `json:"errorMsg"`
+		}
+		vBody := readBody(vResp)
+		_ = json.Unmarshal(vBody, &vResult)
+		slog.Info("wisedu滑块校验", "round", round+1, "gapX", gapX, "offset", off,
+			"moveLength", moveLength, "errorCode", vResult.ErrorCode)
+		if vResult.ErrorCode == 1 {
+			return nil
+		}
+	}
+	return fmt.Errorf("本张图候选值全部未通过（打码值 %d）", gapX)
+}
+
+// sliderSafeSecure 取小图 base64 解码后的末 16 字节作为 safeSecure。
+// 前端 ids-sliderCaptcha.js 中 safeSecure.value 由 atob(smallImage) 的末 16 个
+// charCode 逐字节拼成；encrypt.js 使用时先 trim 再作 AES key（Utf8 编码）。
+func sliderSafeSecure(smallImageB64 string) (string, error) {
+	raw, err := base64.StdEncoding.DecodeString(smallImageB64)
+	if err != nil {
+		return "", fmt.Errorf("小图 base64 解码失败: %w", err)
+	}
+	if len(raw) < 16 {
+		return "", fmt.Errorf("小图数据不足 16 字节: %d", len(raw))
+	}
+	var sb strings.Builder
+	for _, c := range raw[len(raw)-16:] {
+		sb.WriteRune(rune(c))
+	}
+	// 复刻 JS 正则 /(^\s+)|(\s+$)/g 的 trim（字节码点 ≤255，空白字符集有限）
+	return strings.Trim(sb.String(), "\t\n\v\f\r \u00a0"), nil
+}
+
+// encryptSliderSign 复刻 encrypt.js encryptPassword(data, key)：
+// AES-128-CBC-PKCS7，key=Utf8(key.trim())，iv=randomString(16)，
+// 明文=randomString(64)+data，输出标准 base64（仅密文，IV 不外传，与 CryptoJS 一致）。
+//
+// IV 随机且不随请求发送是安全的：CBC 解密时 IV 只影响第一块（16 字节）明文，
+// 而首块落在 64 位随机前缀内部；服务端剥离前缀后从固定偏移解析 JSON，不受影响
+// （已用真实 CryptoJS 输出 + openssl/node 解密交叉验证）。
+func encryptSliderSign(data, safeSecure string) (string, error) {
+	key := []byte(safeSecure)
+	switch len(key) {
+	case 16, 24, 32:
+	default:
+		return "", fmt.Errorf("safeSecure 长度非法（%d 字节，须为 16/24/32）", len(key))
+	}
+	block, err := aes.NewCipher(key)
+	if err != nil {
+		return "", err
+	}
+	padded := pkcs7Pad([]byte(randomAesChars(64)+data), block.BlockSize())
+	iv := []byte(randomAesChars(aes.BlockSize))
+	ciphertext := make([]byte, len(padded))
+	cipher.NewCBCEncrypter(block, iv).CryptBlocks(ciphertext, padded)
+	return base64.StdEncoding.EncodeToString(ciphertext), nil
+}
+
+// wiseduSliderTracks 生成拟人化拖动轨迹，模拟 longbow.js 采集的 {a,b,c} 采样点：
+// 首个点为 {0,0,0}，随后按比例推进并带轻微抖动，最后一点精确对齐 moveLength
+// （对应前端 mouseup 时的最终位移）。
+func wiseduSliderTracks(move int) []wiseduSliderTrack {
+	steps := 8 + randSmallN(5) // 8~12 个中间采样点
+	tracks := make([]wiseduSliderTrack, 0, steps+2)
+	tracks = append(tracks, wiseduSliderTrack{A: 0, B: 0, C: 0})
+	a, c := 0, 0
+	for i := 1; i <= steps; i++ {
+		target := move * i / steps
+		if target <= a {
+			target = a + 1
+		}
+		if target > move {
+			target = move
+		}
+		a = target + randSmallN(3) - 1 // ±1 抖动
+		if a > move {
+			a = move
+		}
+		if a < 0 {
+			a = 0
+		}
+		c += 20 + randSmallN(45)
+		tracks = append(tracks, wiseduSliderTrack{A: a, B: randSmallN(3) - 1, C: c})
+	}
+	c += 30 + randSmallN(40)
+	tracks = append(tracks, wiseduSliderTrack{A: move, B: 0, C: c})
+	return tracks
+}
+
+// randomAesChars 生成 n 个 wiseduAesChars 字符集的随机字符（对应 encrypt.js randomString）
+func randomAesChars(n int) string {
+	buf := make([]byte, n)
+	_, _ = rand.Read(buf)
+	for i, c := range buf {
+		buf[i] = wiseduAesChars[int(c)%len(wiseduAesChars)]
+	}
+	return string(buf)
+}
+
+// randSmallN 返回 [0,n) 的伪随机数（仅用于轨迹/时间的拟人化抖动，无安全要求）
+func randSmallN(n int) int {
+	if n <= 0 {
+		return 0
+	}
+	b := make([]byte, 1)
+	_, _ = rand.Read(b)
+	return int(b[0]) % n
+}

backed/internal/service/cpdaily/slider_test.go

@@ -0,0 +1,497 @@
+package cpdaily
+
+import (
+	"context"
+	"crypto/aes"
+	"crypto/cipher"
+	"encoding/base64"
+	"encoding/json"
+	"fmt"
+	"net/http"
+	"net/http/cookiejar"
+	"net/http/httptest"
+	"strings"
+	"testing"
+	"time"
+
+	"cpdaily-new/internal/config"
+
+	"github.com/go-resty/resty/v2"
+)
+
+// ========== isSliderCaptchaSchool ==========
+
+func TestIsSliderCaptchaSchool(t *testing.T) {
+	old := config.Global.Cpdaily.SliderIds
+	defer func() { config.Global.Cpdaily.SliderIds = old }()
+	config.Global.Cpdaily.SliderIds = []string{"1018764144934965", "sdhyxy", "hqdx"}
+
+	for _, id := range []string{"hqdx", "sdhyxy", "1018764144934965"} {
+		if !isSliderCaptchaSchool(id) {
+			t.Errorf("%s 应为滑块学校", id)
+		}
+	}
+	for _, id := range []string{"xcu", "nut", "hfnu", ""} {
+		if isSliderCaptchaSchool(id) {
+			t.Errorf("%s 不应为滑块学校", id)
+		}
+	}
+}
+
+// ========== safeSecure / sign 加密（encrypt.js 协议） ==========
+
+// mockSliderSafe 模拟小图末 16 字节（hqu 实测为 ASCII 串）
+const mockSliderSafe = "Ta1PFklnamXPYqZX"
+
+// mockSmallImageB64 构造以 mockSliderSafe 结尾的 base64 小图
+func mockSmallImageB64() string {
+	raw := append([]byte{0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x01}, []byte(mockSliderSafe)...)
+	return base64.StdEncoding.EncodeToString(raw)
+}
+
+func TestSliderSafeSecure(t *testing.T) {
+	got, err := sliderSafeSecure(mockSmallImageB64())
+	if err != nil {
+		t.Fatalf("sliderSafeSecure: %v", err)
+	}
+	if got != mockSliderSafe {
+		t.Fatalf("safeSecure=%q, want %q", got, mockSliderSafe)
+	}
+
+	// 首尾空白应被 trim（复刻 encrypt.js 的 key.replace 正则）
+	trimmed := base64.StdEncoding.EncodeToString([]byte("\tTa1PFklnamXPYqZ\n"))
+	if got, err := sliderSafeSecure(trimmed); err != nil || got != "Ta1PFklnamXPYqZ" {
+		t.Fatalf("trim 后 safeSecure=%q err=%v", got, err)
+	}
+
+	// 不足 16 字节应报错
+	short := base64.StdEncoding.EncodeToString([]byte("short"))
+	if _, err := sliderSafeSecure(short); err == nil {
+		t.Fatal("小图不足 16 字节应报错")
+	}
+}
+
+func TestEncryptSliderSign(t *testing.T) {
+	const key = "0123456789abcdef"
+	plain := `{"canvasLength":280,"moveLength":99,"tracks":[{"a":0,"b":0,"c":0}]}`
+
+	sign, err := encryptSliderSign(plain, key)
+	if err != nil {
+		t.Fatalf("encryptSliderSign: %v", err)
+	}
+	raw, err := base64.StdEncoding.DecodeString(sign)
+	if err != nil || len(raw)%aes.BlockSize != 0 {
+		t.Fatalf("sign base64/长度异常: err=%v len=%d", err, len(raw))
+	}
+
+	// 用零 IV 解密（IV 只影响首块 16 字节，落于前缀内，不影响前缀后半段与载荷）
+	block, _ := aes.NewCipher([]byte(key))
+	pt := make([]byte, len(raw))
+	cipher.NewCBCDecrypter(block, make([]byte, aes.BlockSize)).CryptBlocks(pt, raw)
+	pt = pkcs7Unpad(pt)
+
+	if len(pt) != 64+len(plain) {
+		t.Fatalf("解密明文长度=%d, want %d", len(pt), 64+len(plain))
+	}
+	if string(pt[64:]) != plain {
+		t.Fatalf("解密明文=%q, want %q", string(pt[64:]), plain)
+	}
+	// 首块因 IV 未知为乱码，第 16~63 字节应为合法前缀字符（48 个）
+	for _, c := range string(pt[16:64]) {
+		if !strings.ContainsRune(wiseduAesChars, c) {
+			t.Fatalf("随机前缀包含非法字符 %q", c)
+		}
+	}
+}
+
+// 真实 CryptoJS（/tmp/hqu_encrypt.js encryptPassword）产出的 sign 夹具：
+// key=Ta1PFklnamXPYqZX，明文载荷为 canvasLength=280/moveLength=65/2 个 tracks 采样点。
+// 用于锁定与前端 CryptoJS 的互通性（前缀长度、填充、base64、载荷可解析）。
+const realCryptoJSSignFixture = "+vjAgkLevuKAVqM/x6dCJJwlR5xLcrJ0yW6tqTmeu8MXCCBJvY4rttiA4ouUBHYdCP2zjYzbGgKDyTvTQdmvPnOV6DlSiQvCIhtaQcBksVFjYsMi2i7hCaKu3sfA9SszYZVs/8AvSqPPcvr+MlvarV7fSPaJdtPpbI1lYSU30MiFHBTl5V8cZMdlA+Zj290xoQlg3niG2V3f0sLzEQ4Wrg=="
+
+func TestDecryptRealCryptoJSFixture(t *testing.T) {
+	pt, err := decryptMockSign(realCryptoJSSignFixture)
+	if err != nil {
+		t.Fatalf("解密真实 CryptoJS sign 失败: %v", err)
+	}
+	p := mockDecryptSign(t, realCryptoJSSignFixture)
+	if p.CanvasLength != 280 || p.MoveLength != 65 {
+		t.Fatalf("载荷字段错误: %+v", p)
+	}
+	if len(p.Tracks) != 2 || p.Tracks[1].A != 65 {
+		t.Fatalf("tracks 错误: %+v", p.Tracks)
+	}
+	// 第 16~63 字节为合法前缀字符（48 个）
+	for _, c := range string(pt[16:64]) {
+		if !strings.ContainsRune(wiseduAesChars, c) {
+			t.Fatalf("随机前缀包含非法字符 %q", c)
+		}
+	}
+}
+
+func TestWiseduSliderTracks(t *testing.T) {
+	tracks := wiseduSliderTracks(65)
+	if len(tracks) < 2 {
+		t.Fatalf("tracks 采样点过少: %d", len(tracks))
+	}
+	if first := tracks[0]; first.A != 0 || first.B != 0 || first.C != 0 {
+		t.Fatalf("首个采样点应为 {0,0,0}: %+v", first)
+	}
+	if last := tracks[len(tracks)-1]; last.A != 65 {
+		t.Fatalf("末点 a=%d, want 65（对齐 moveLength）", last.A)
+	}
+	prevC := 0
+	for i, p := range tracks {
+		if p.C < prevC {
+			t.Fatalf("第 %d 点时间回退: %+v", i, p)
+		}
+		if p.A < 0 || p.A > 65 {
+			t.Fatalf("第 %d 点位移越界: %+v", i, p)
+		}
+		prevC = p.C
+	}
+}
+
+// ========== wisedu CAS 滑块流程（httptest mock，sign 协议） ==========
+
+// disableSliderDelays 将换图重试延迟、激活等待与候选间隔全部置零（加速测试）
+func disableSliderDelays(t *testing.T) {
+	t.Helper()
+	oldDelay := wiseduSliderRetryDelay
+	oldWait := wiseduSliderActivateWait
+	oldGap := wiseduSliderSubmitGap
+	wiseduSliderRetryDelay = func(int) time.Duration { return 0 }
+	wiseduSliderActivateWait = 0
+	wiseduSliderSubmitGap = 0
+	t.Cleanup(func() {
+		wiseduSliderRetryDelay = oldDelay
+		wiseduSliderActivateWait = oldWait
+		wiseduSliderSubmitGap = oldGap
+	})
+}
+
+// mockDecryptSign 用 mockSliderSafe 解密并解析 sign 载荷（模拟服务端行为）。
+// 加密端 IV 随机且不外传：CBC 中 IV 只影响解密后第一块（16 字节），而该 16 字节
+// 落在 64 位随机前缀内部，服务端剥掉前缀后解析 JSON 不受任何影响，故此处 IV 取
+// 零向量即可，解密结果第 16 字节起与前端一致（已用真实 CryptoJS 输出交叉验证）。
+func mockDecryptSign(t *testing.T, sign string) wiseduSliderTrackPayload {
+	t.Helper()
+	pt, err := decryptMockSign(sign)
+	if err != nil {
+		t.Fatalf("解密 sign 失败: %v", err)
+	}
+	var p wiseduSliderTrackPayload
+	if err := json.Unmarshal(pt[64:], &p); err != nil {
+		t.Fatalf("解密载荷 JSON 解析失败: %v, prefix64=%q body=%s", err, string(pt[:64]), string(pt[64:]))
+	}
+	return p
+}
+
+// decryptMockSign 用 mockSliderSafe 解密 sign（零 IV），返回去除 PKCS7 填充后的明文
+func decryptMockSign(sign string) ([]byte, error) {
+	raw, err := base64.StdEncoding.DecodeString(sign)
+	if err != nil {
+		return nil, err
+	}
+	if len(raw) < 32 || len(raw)%aes.BlockSize != 0 {
+		return nil, fmt.Errorf("sign 长度异常: %d", len(raw))
+	}
+	block, err := aes.NewCipher([]byte(mockSliderSafe))
+	if err != nil {
+		return nil, err
+	}
+	pt := make([]byte, len(raw))
+	cipher.NewCBCDecrypter(block, make([]byte, aes.BlockSize)).CryptBlocks(pt, raw)
+	pt = pkcs7Unpad(pt)
+	if len(pt) < 64 {
+		return nil, fmt.Errorf("解密后明文过短: %d", len(pt))
+	}
+	return pt, nil
+}
+
+// mockSliderServer 起一个 wisedu CAS 滑块 mock：
+// verify 接受 accept 集合中的 moveLength（errorCode=1），其余一律 errorCode=0
+func mockSliderServer(t *testing.T, accept map[int]bool, wantGapX int,
+	openCalls, verifyCalls *int) *httptest.Server {
+	t.Helper()
+	small := mockSmallImageB64()
+	mux := http.NewServeMux()
+	mux.HandleFunc("/authserver/common/openSliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		*openCalls++
+		if r.Header.Get("X-Requested-With") != "XMLHttpRequest" {
+			t.Errorf("open 缺少 X-Requested-With 头")
+		}
+		if r.Header.Get("Referer") == "" {
+			t.Errorf("open 缺少 Referer 头")
+		}
+		writeJSON(w, map[string]string{"bigImage": "ZmFrZWJpZw==", "smallImage": small})
+	})
+	mux.HandleFunc("/authserver/common/verifySliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		*verifyCalls++
+		if r.Header.Get("X-Requested-With") != "XMLHttpRequest" {
+			t.Errorf("verify 缺少 X-Requested-With 头")
+		}
+		_ = r.ParseForm()
+		p := mockDecryptSign(t, r.PostFormValue("sign"))
+		if p.CanvasLength != 280 {
+			t.Errorf("canvasLength=%d, want 280", p.CanvasLength)
+		}
+		if len(p.Tracks) < 2 {
+			t.Errorf("tracks 采样点过少: %d", len(p.Tracks))
+		}
+		if last := p.Tracks[len(p.Tracks)-1]; last.A != p.MoveLength {
+			t.Errorf("tracks 末点 a=%d 应等于 moveLength=%d", last.A, p.MoveLength)
+		}
+		if accept[p.MoveLength] {
+			writeJSON(w, map[string]int{"errorCode": 1})
+			return
+		}
+		writeJSON(w, map[string]int{"errorCode": 0})
+	})
+	ts := httptest.NewServer(mux)
+	t.Cleanup(ts.Close)
+	return ts
+}
+
+// 打码值直接命中：1 次 open + 1 次 verify
+func TestResolveWiseduSliderCaptchaMock(t *testing.T) {
+	disableSliderDelays(t)
+	var openCalls, verifyCalls int
+	ts := mockSliderServer(t, map[int]bool{65: true}, 65, &openCalls, &verifyCalls)
+
+	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
+	defer cancel()
+	err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil })
+	if err != nil {
+		t.Fatalf("滑块流程失败: %v", err)
+	}
+	if openCalls != 1 || verifyCalls != 1 {
+		t.Fatalf("open=%d verify=%d, want 1/1", openCalls, verifyCalls)
+	}
+}
+
+// 打码值略偏（真值=打码值+1）：同一张图第 2 个候选即命中，不应换图
+func TestResolveWiseduSliderCaptchaCandidateHit(t *testing.T) {
+	disableSliderDelays(t)
+	var openCalls, verifyCalls int
+	ts := mockSliderServer(t, map[int]bool{66: true}, 65, &openCalls, &verifyCalls)
+
+	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
+	defer cancel()
+	err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil })
+	if err != nil {
+		t.Fatalf("滑块流程失败: %v", err)
+	}
+	// 失败不换图（±1 由同图候选覆盖），成功即止
+	if openCalls != 1 {
+		t.Fatalf("open=%d, want 1（同图候选不应换图）", openCalls)
+	}
+	if verifyCalls != 2 {
+		t.Fatalf("verify=%d, want 2（65 失败后 66 命中）", verifyCalls)
+	}
+}
+
+// 真值=打码值-1：第 3 个候选（65,66,64 中 64）命中
+func TestResolveWiseduSliderCaptchaCandidateHitBelow(t *testing.T) {
+	disableSliderDelays(t)
+	var openCalls, verifyCalls int
+	ts := mockSliderServer(t, map[int]bool{64: true}, 65, &openCalls, &verifyCalls)
+
+	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
+	defer cancel()
+	err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil })
+	if err != nil {
+		t.Fatalf("滑块流程失败: %v", err)
+	}
+	if openCalls != 1 || verifyCalls != 3 {
+		t.Fatalf("open=%d verify=%d, want 1/3（65,66 失败后 64 命中）", openCalls, verifyCalls)
+	}
+}
+
+// 5 张图全失败：每图 3 个候选值（0,+1,-1），共 15 次 verify 后报错
+func TestResolveWiseduSliderCaptchaExhausted(t *testing.T) {
+	disableSliderDelays(t)
+	var openCalls, verifyCalls int
+	ts := mockSliderServer(t, map[int]bool{}, 65, &openCalls, &verifyCalls)
+
+	ctx, cancel := context.WithTimeout(context.Background(), 20*time.Second)
+	defer cancel()
+	err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil })
+	if err == nil {
+		t.Fatal("持续失败应返回错误")
+	}
+	if openCalls != 5 {
+		t.Fatalf("open=%d, want 5", openCalls)
+	}
+	if verifyCalls != 3*5 {
+		t.Fatalf("verify=%d, want %d", verifyCalls, 3*5)
+	}
+}
+
+// 取图失败（非 JSON 响应）应报错并换图重试
+func TestResolveWiseduSliderCaptchaBadResponse(t *testing.T) {
+	disableSliderDelays(t)
+	var openCalls, verifyCalls int
+	mux := http.NewServeMux()
+	mux.HandleFunc("/authserver/common/openSliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		openCalls++
+		_, _ = w.Write([]byte("<html>error</html>"))
+	})
+	mux.HandleFunc("/authserver/common/verifySliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		verifyCalls++
+		t.Error("取图失败时不应调用 verify")
+	})
+	ts := httptest.NewServer(mux)
+	defer ts.Close()
+
+	ctx, cancel := context.WithTimeout(context.Background(), 20*time.Second)
+	defer cancel()
+	if err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil }); err == nil {
+		t.Fatal("应返回错误")
+	}
+	if openCalls != 5 {
+		t.Fatalf("open=%d, want 5", openCalls)
+	}
+	if verifyCalls != 0 {
+		t.Fatalf("verify=%d, want 0", verifyCalls)
+	}
+}
+
+// 服务端激活延迟：mock 在 open 后 300ms 内拒绝一切值（复刻实测 1.3~1.7s 激活窗口），
+// 等待逻辑（此处缩短为 400ms）应保证首个候选即命中：open=1、verify=1。
+// 若等待缺失，首个候选会落在拒绝窗口内而多提交一轮，verify 数与 open 数都会变化。
+func TestResolveWiseduSliderCaptchaActivationWait(t *testing.T) {
+	oldWait := wiseduSliderActivateWait
+	oldGap := wiseduSliderSubmitGap
+	oldDelay := wiseduSliderRetryDelay
+	wiseduSliderActivateWait = 400 * time.Millisecond
+	wiseduSliderSubmitGap = 0
+	wiseduSliderRetryDelay = func(int) time.Duration { return 0 }
+	t.Cleanup(func() {
+		wiseduSliderActivateWait = oldWait
+		wiseduSliderSubmitGap = oldGap
+		wiseduSliderRetryDelay = oldDelay
+	})
+
+	const rejectWithin = 300 * time.Millisecond
+	var openCalls, verifyCalls int
+	var openAt time.Time
+	mux := http.NewServeMux()
+	mux.HandleFunc("/authserver/common/openSliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		openCalls++
+		openAt = time.Now()
+		writeJSON(w, map[string]string{"bigImage": "ZmFrZWJpZw==", "smallImage": mockSmallImageB64()})
+	})
+	mux.HandleFunc("/authserver/common/verifySliderCaptcha.htl", func(w http.ResponseWriter, r *http.Request) {
+		verifyCalls++
+		_ = r.ParseForm()
+		p := mockDecryptSign(t, r.PostFormValue("sign"))
+		if time.Since(openAt) >= rejectWithin && p.MoveLength == 65 {
+			writeJSON(w, map[string]int{"errorCode": 1})
+			return
+		}
+		writeJSON(w, map[string]int{"errorCode": 0})
+	})
+	ts := httptest.NewServer(mux)
+	defer ts.Close()
+
+	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
+	defer cancel()
+	err := resolveWiseduSliderCaptchaFn(ctx, ts.URL+"/authserver", ts.URL+"/login", newTestRestyClient(),
+		func(string, string) (int, error) { return 65, nil })
+	if err != nil {
+		t.Fatalf("滑块流程失败: %v", err)
+	}
+	if openCalls != 1 || verifyCalls != 1 {
+		t.Fatalf("open=%d verify=%d, want 1/1（激活等待后首个候选应命中）", openCalls, verifyCalls)
+	}
+}
+
+// ========== parseLoginForm 表单选择（#pwdLoginDiv 优先级） ==========
+
+// 模拟华侨大学登录页：3 个 form（fido/动态码/账密），账密字段位于 #pwdLoginDiv
+func TestParseLoginFormPwdLoginDiv(t *testing.T) {
+	inputs := parseLoginForm([]byte(hquLoginPageHTML), "2523132014", "testpwd123")
+
+	if inputs["cllt"] != "userNameLogin" {
+		t.Fatalf("应选中 #pwdLoginDiv 账密表单, cllt=%s", inputs["cllt"])
+	}
+	if inputs["username"] != "2523132014" {
+		t.Fatalf("username 错误: %s", inputs["username"])
+	}
+	if inputs["execution"] != "e1s1" {
+		t.Fatalf("execution 错误: %s", inputs["execution"])
+	}
+	// 密码应被 AES 加密（含 pwdEncryptSalt）
+	if inputs["password"] == "" || inputs["password"] == "testpwd123" {
+		t.Fatalf("password 应被加密: %q", inputs["password"])
+	}
+	// userPassword（明文框）应被删除
+	if _, ok := inputs["userPassword"]; ok {
+		t.Fatal("userPassword 字段应被删除")
+	}
+	// captcha 留空（滑块通过后提交）
+	if v, ok := inputs["captcha"]; !ok || v != "" {
+		t.Fatalf("captcha 应保留空值: %q %v", v, ok)
+	}
+}
+
+// ========== 辅助 ==========
+
+func writeJSON(w http.ResponseWriter, v interface{}) {
+	w.Header().Set("Content-Type", "application/json")
+	_ = json.NewEncoder(w).Encode(v)
+}
+
+func newTestRestyClient() *resty.Client {
+	// 与 sessionClient 保持一致：DoNotParseResponse 模式（readBody 依赖 RawBody）
+	jar, _ := cookiejar.New(nil)
+	return resty.New().
+		SetTimeout(5*time.Second).
+		SetDoNotParseResponse(true).
+		SetCookieJar(jar).
+		SetHeader("User-Agent", "Mozilla/5.0 (iPhone; CPU iPhone OS 17_0 like Mac OS X)")
+}
+
+// 模拟华侨大学登录页 HTML（账密字段位于 #pwdLoginDiv，含 pwdEncryptSalt）
+const hquLoginPageHTML = `<!DOCTYPE html>
+<html><body>
+<form method="post" id="loginFromId_fido" class="loginFromClass_fido" action="/authserver/login">
+  <input type="hidden" name="_eventId" value="submit"/>
+  <input type="text" name="username" value=""/>
+  <input type="hidden" name="responseJson" value=""/>
+  <input type="hidden" id="cllt" name="cllt" value="userNameLoginFido"/>
+  <input type="hidden" name="dllt" value="generalLogin"/>
+  <input type="hidden" id="lt" name="lt" value=""/>
+  <input type="hidden" name="execution" value="e1s1"/>
+</form>
+<form method="post" id="loginFromId" class="loginFromClass" action="/authserver/login">
+  <input type="text" name="username" value=""/>
+  <input type="text" id="captcha" name="captcha" placeholder="请输入验证码"/>
+  <input type="text" name="dynamicCode" value=""/>
+  <input type="hidden" name="_eventId" value="submit"/>
+  <input type="hidden" id="lt" name="lt" value=""/>
+  <input type="hidden" id="cllt" name="cllt" value="dynamicLogin"/>
+  <input type="hidden" name="dllt" value="generalLogin"/>
+  <input type="hidden" name="execution" value="e1s1"/>
+</form>
+<form method="post" id="loginFromId" class="loginFromClass" action="/authserver/login">
+  <div id="pwdLoginDiv">
+    <input type="text" name="username" value=""/>
+    <input type="password" name="userPassword" value=""/>
+    <input type="hidden" name="password" value=""/>
+    <input type="text" id="captcha" name="captcha" placeholder="请输入验证码"/>
+    <input type="hidden" name="_eventId" value="submit"/>
+    <input type="hidden" id="lt" name="lt" value=""/>
+    <input type="hidden" id="cllt" name="cllt" value="userNameLogin"/>
+    <input type="hidden" name="dllt" value="generalLogin"/>
+    <input type="hidden" name="execution" value="e1s1"/>
+  </div>
+</form>
+<input type="hidden" id="pwdEncryptSalt" value="sQJL9rnqFD65soWK"/>
+</body></html>`

backed/internal/service/cpdaily/task.go

@@ -26,6 +26,7 @@ type TaskType string
 const (
 	TaskTypeSign       TaskType = "sign"
 	TaskTypeSleepCheck TaskType = "sleep_check"
+	TaskTypeLeave      TaskType = "leave" // 销假（请假销假）图片上传使用
 )
 
 // 各任务类型的 API 基础路径
@@ -485,6 +486,11 @@ func ParseTaskForm(detail *TaskFormDetail, historyRows map[string]interface{}) [
 		histRows = historyRows
 	}
 
+	// 扫码签到任务（signMode=2）：只需要签到二维码（可选照片/额外字段），不需要定位信息
+	if isScanMode(rows) {
+		return parseScanTaskForm(detail, histRows)
+	}
+
 	// 提取历史值（与旧版系统格式一致：lon/lat/address 分开存储）
 	histLon := ""
 	histLat := ""
@@ -719,8 +725,131 @@ func ParseTaskForm(detail *TaskFormDetail, historyRows map[string]interface{}) [
 	return list
 }
 
+// parseScanTaskForm 生成扫码签到任务（signMode=2）的表单项：
+// 签到二维码（必填，支持上传图片或粘贴链接）+ 可选签到照片 + 可选额外字段
+func parseScanTaskForm(detail *TaskFormDetail, histRows map[string]interface{}) []cpdmodel.CpTaskFormItem {
+	rows := detail.Rows
+	var list []cpdmodel.CpTaskFormItem
+
+	// 二维码ID（uuid）：历史值若为可解析的链接/文本，统一归一化为 uuid 存储，
+	// 避免把整条链接（乃至 base64 图片）写进 formData。
+	histQr := ""
+	if histRows != nil {
+		if v, ok := histRows["qrCode"]; ok && v != nil {
+			raw := fmt.Sprintf("%v", v)
+			if uuid := ExtractQrUuid(raw); uuid != "" {
+				histQr = uuid
+			} else if !IsDataURIImage(raw) {
+				histQr = raw
+			}
+		}
+	}
+	list = append(list, cpdmodel.CpTaskFormItem{
+		Title:    "二维码ID",
+		ColName:  "uuid",
+		Type:     cpdmodel.ItemTypeImage,
+		Required: true,
+		Content:  histQr,
+		Show:     true,
+		Tip:      "上传现场签到二维码图片，自动解析并保存二维码ID（uuid）",
+	})
+
+	// 签到照片（任务要求时保留）
+	isPhoto := detail.IsPhoto
+	if !isPhoto && histRows != nil {
+		if v, ok := histRows["isPhoto"]; ok {
+			if f, ok := v.(float64); ok && f == 1 {
+				isPhoto = true
+			}
+		}
+	}
+	if isPhoto {
+		histSignPhotoUrl := ""
+		if histRows != nil {
+			if photo, ok := histRows["signPhotoUrl"]; ok && photo != nil {
+				histSignPhotoUrl = fmt.Sprintf("%v", photo)
+			}
+		}
+		if histSignPhotoUrl == "" {
+			if photo, ok := rows["signPhotoUrl"]; ok && photo != nil {
+				histSignPhotoUrl = fmt.Sprintf("%v", photo)
+			}
+		}
+		list = append(list, cpdmodel.CpTaskFormItem{
+			Title:    "签到照片",
+			ColName:  "signImg",
+			Type:     cpdmodel.ItemTypeImage,
+			Required: true,
+			Content:  histSignPhotoUrl,
+			Default:  histSignPhotoUrl,
+			Show:     true,
+		})
+	}
+
+	// 额外字段
+	if detail.IsNeedExtra {
+		for i, field := range detail.ExtraField {
+			fm, ok := field.(map[string]interface{})
+			if !ok {
+				continue
+			}
+			extraTitle, _ := fm["title"].(string)
+			isReq, _ := fm["isRequired"].(bool)
+			hasOther, _ := fm["hasOtherItems"].(bool)
+
+			item := cpdmodel.CpTaskFormItem{
+				Title:    extraTitle,
+				ColName:  extraTitle,
+				Type:     cpdmodel.ItemTypeSingle,
+				Number:   uint(i + 1),
+				Required: isReq,
+				IsOther:  hasOther,
+				Show:     true,
+			}
+			if items, ok := fm["extraFieldItems"].([]interface{}); ok {
+				for _, it := range items {
+					if im, ok := it.(map[string]interface{}); ok {
+						content, _ := im["content"].(string)
+						otherItems, _ := im["isOtherItems"].(bool)
+						item.Options = append(item.Options, cpdmodel.CpTaskFormOption{
+							Content:      content,
+							IsOtherItems: otherItems,
+						})
+					}
+				}
+			}
+			list = append(list, item)
+		}
+	}
+
+	return list
+}
+
 // FillSubmitForm 根据用户配置的表单项填充提交表单
-func FillSubmitForm(rows map[string]interface{}, formItems []cpdmodel.CpTaskFormItem, deviceId string) map[string]interface{} {
+// isScanMode 判断任务是否为扫码签到类型（signMode=2，兼容数字/字符串/json.Number）
+func isScanMode(rows map[string]interface{}) bool {
+	if rows == nil {
+		return false
+	}
+	switch v := rows["signMode"].(type) {
+	case float64:
+		return int(v) == 2
+	case int:
+		return v == 2
+	case string:
+		return v == "2"
+	case json.Number:
+		return v.String() == "2"
+	}
+	return false
+}
+
+func FillSubmitForm(rows map[string]interface{}, formItems []cpdmodel.CpTaskFormItem, deviceId string) (map[string]interface{}, error) {
+	// 扫码签到任务（signMode=2）：从签到二维码解析 uuid，提交体用 qrUuid 替代 signInstanceWid
+	if isScanMode(rows) {
+		return fillScanSubmitForm(rows, formItems)
+	}
+
 	result := make(map[string]interface{})
 
 	// 提取经纬度和地址（兼容旧版 lon/lat 和新版 latAndLon 两种格式）
@@ -793,6 +922,13 @@ func FillSubmitForm(rows map[string]interface{}, formItems []cpdmodel.CpTaskForm
 	}
 
 	// 额外字段
+	fillExtraFields(rows, formItems, result)
+
+	return result, nil
+}
+
+// fillExtraFields 填充任务额外字段（isNeedExtra）到提交表单
+func fillExtraFields(rows map[string]interface{}, formItems []cpdmodel.CpTaskFormItem, result map[string]interface{}) {
 	isNeedExtra := false
 	if v, ok := rows["isNeedExtra"]; ok {
 		if f, ok := v.(float64); ok && f == 1 {
@@ -835,8 +971,50 @@ func FillSubmitForm(rows map[string]interface{}, formItems []cpdmodel.CpTaskForm
 	} else {
 		result["isNeedExtra"] = 0
 	}
+}
 
-	return result
+// fillScanSubmitForm 生成扫码签到（signMode=2）的提交表单：
+// 取二维码ID（uuid）字段，解析出 uuid 后用 qrUuid 替代 signInstanceWid（两者不并存），
+// 不携带经纬度等定位字段。
+// 字段名兼容：新数据为 uuid，历史数据为 qrCode。
+func fillScanSubmitForm(rows map[string]interface{}, formItems []cpdmodel.CpTaskFormItem) (map[string]interface{}, error) {
+	qrContent := ""
+	for _, v := range formItems {
+		if v.ColName == "uuid" || v.ColName == "qrCode" {
+			qrContent = strings.TrimSpace(v.Content)
+			break
+		}
+	}
+	uuid, err := ResolveQrUuidFromContent(qrContent)
+	if err != nil {
+		return nil, fmt.Errorf("二维码签到任务缺少有效签到二维码: %w", err)
+	}
+
+	result := map[string]interface{}{
+		"qrUuid":       uuid,
+		"uaIsCpadaily": true,
+	}
+
+	// 签到照片（任务要求时保留，与普通签到一致）
+	isPhoto := false
+	if v, ok := rows["isPhoto"]; ok {
+		if f, ok := v.(float64); ok && f == 1 {
+			isPhoto = true
+		}
+	}
+	if isPhoto {
+		for _, v := range formItems {
+			if v.ColName == "signImg" && v.Content != "" {
+				result["signPhotoUrl"] = v.Content
+				break
+			}
+		}
+	}
+
+	// 额外字段（与普通签到保持一致的提交结构）
+	fillExtraFields(rows, formItems, result)
+
+	return result, nil
 }
 
 // SignPlace 查寝组/签到任务配置的签到范围点
@@ -1081,6 +1259,7 @@ func SubmitSign(cookieMap map[string]string, host string, taskType TaskType, sub
 		return fmt.Errorf("解析签到响应失败: %w, body: %s", err, string(body))
 	}
 	code, _ := result.Code.Int64()
+	slog.Info("submitSign 响应", "code", result.Code.String(), "message", result.Message, "body", string(body))
 	if code != 0 {
 		msg := result.Message
 		if msg == "" {

backed/internal/service/cpdaily/task_scan_test.go

@@ -0,0 +1,112 @@
+package cpdaily
+
+import (
+	"testing"
+
+	cpdmodel "cpdaily-new/internal/model"
+)
+
+// 扫码任务：提交表单必须用 qrUuid 替代 signInstanceWid，且不携带经纬度
+func TestFillScanSubmitForm(t *testing.T) {
+	rows := map[string]interface{}{
+		"signMode":        float64(2),
+		"signInstanceWid": "397161",
+	}
+	formItems := []cpdmodel.CpTaskFormItem{
+		{Title: "二维码ID", ColName: "uuid", Type: cpdmodel.ItemTypeImage,
+			Content: "https://ynu.campusphere.net/wec-counselor-sign-apps/stu/qrsign/index.html?uuid=1583a66272854585833eb13b56fc1937&isNeedExtra=0"},
+	}
+	form, err := FillSubmitForm(rows, formItems, "device-1")
+	if err != nil {
+		t.Fatalf("FillSubmitForm error: %v", err)
+	}
+	if form["qrUuid"] != "1583a66272854585833eb13b56fc1937" {
+		t.Fatalf("qrUuid = %v", form["qrUuid"])
+	}
+	if _, ok := form["signInstanceWid"]; ok {
+		t.Fatal("scan submit form must NOT contain signInstanceWid")
+	}
+	if _, ok := form["latitude"]; ok {
+		t.Fatal("scan submit form must NOT contain latitude")
+	}
+	if _, ok := form["longitude"]; ok {
+		t.Fatal("scan submit form must NOT contain longitude")
+	}
+	if form["uaIsCpadaily"] != true {
+		t.Fatal("uaIsCpadaily missing")
+	}
+
+	// 缺少二维码 → 明确报错（不再静默生成会假成功的表单）
+	if _, err := FillSubmitForm(rows, nil, "device-1"); err == nil {
+		t.Fatal("missing uuid should return error")
+	}
+
+	// 只存 uuid 的裸值（新流程）：必须能正确解析并提交（含非 32-hex 的 uuid）
+	for _, bare := range []string{"1583a66272854585833eb13b56fc1937", "abc123XYZ"} {
+		items := []cpdmodel.CpTaskFormItem{
+			{Title: "二维码ID", ColName: "uuid", Type: cpdmodel.ItemTypeImage, Content: bare},
+		}
+		f, err := FillSubmitForm(rows, items, "device-1")
+		if err != nil {
+			t.Fatalf("bare uuid %q should resolve, got error: %v", bare, err)
+		}
+		if f["qrUuid"] != bare {
+			t.Fatalf("bare uuid %q → qrUuid = %v", bare, f["qrUuid"])
+		}
+	}
+
+	// 历史数据（colName 仍为 qrCode）继续兼容
+	oldItems := []cpdmodel.CpTaskFormItem{
+		{Title: "签到二维码", ColName: "qrCode", Type: cpdmodel.ItemTypeImage, Content: "1583a66272854585833eb13b56fc1937"},
+	}
+	if f, err := FillSubmitForm(rows, oldItems, "device-1"); err != nil || f["qrUuid"] != "1583a66272854585833eb13b56fc1937" {
+		t.Fatalf("legacy qrCode field should still work: form=%v err=%v", f, err)
+	}
+
+	// 普通任务（无 signMode）不受影响：走原逻辑，且不含 qrUuid
+	normalRows := map[string]interface{}{"signInstanceWid": "123"}
+	normalItems := []cpdmodel.CpTaskFormItem{
+		{ColName: "lat", Content: "24.8"},
+		{ColName: "lon", Content: "102.8"},
+		{ColName: "address", Content: "云南大学"},
+	}
+	normalForm, err := FillSubmitForm(normalRows, normalItems, "device-1")
+	if err != nil {
+		t.Fatalf("normal FillSubmitForm error: %v", err)
+	}
+	if normalForm["latitude"] != "24.8" || normalForm["signInstanceWid"] != "123" {
+		t.Fatalf("normal form mismatch: %v", normalForm)
+	}
+	if _, ok := normalForm["qrUuid"]; ok {
+		t.Fatal("normal form must not contain qrUuid")
+	}
+}
+
+// 扫码任务表单项解析：ParseTaskForm 应生成「二维码ID」图片项，不含经纬度项
+func TestParseScanTaskForm(t *testing.T) {
+	detail := &TaskFormDetail{
+		Rows: map[string]interface{}{"signMode": float64(2)},
+	}
+	items := ParseTaskForm(detail, nil)
+	if len(items) != 1 {
+		t.Fatalf("scan form items = %d, want 1: %+v", len(items), items)
+	}
+	if items[0].ColName != "uuid" || items[0].Type != cpdmodel.ItemTypeImage || !items[0].Required {
+		t.Fatalf("unexpected uuid item: %+v", items[0])
+	}
+}
+
+// 历史行数据里的二维码链接应被归一化为 uuid 存储（不把整条链接写入 formData）
+func TestParseScanTaskFormNormalizesUuid(t *testing.T) {
+	detail := &TaskFormDetail{Rows: map[string]interface{}{"signMode": float64(2)}}
+	histRows := map[string]interface{}{
+		"qrCode": "https://ynu.campusphere.net/wec-counselor-sign-apps/stu/qrsign/index.html?uuid=1583a66272854585833eb13b56fc1937&isNeedExtra=0",
+	}
+	items := ParseTaskForm(detail, histRows)
+	if len(items) != 1 {
+		t.Fatalf("items = %d, want 1", len(items))
+	}
+	if items[0].Content != "1583a66272854585833eb13b56fc1937" {
+		t.Fatalf("history link should normalize to uuid, got %q", items[0].Content)
+	}
+}

backed/internal/service/jwt.go

@@ -12,6 +12,10 @@ type Claims struct {
 	UserID   uint   `json:"userId"`
 	Username string `json:"username"`
 	SchoolID string `json:"schoolId"`
+	// MFA 标记：通过多因子认证通道登录的用户。此类账号第三方会话无法自动续期
+	// （重新登录需人工输入验证码），JWT 有效期与第三方 Cookie 对齐（短期），
+	// 刷新 token 也不会延长会话。
+	MFA bool `json:"mfa,omitempty"`
 	jwt.RegisteredClaims
 }
 
@@ -64,6 +68,43 @@ func GenerateTokens(userID uint, username, schoolID string) (*TokenPair, error)
 	}, nil
 }
 
+// GenerateShortTokens 生成 MFA 通道登录的短期 token 对：
+// access 与 refresh 有效期均为 ttl 秒（与第三方 Cookie 有效期对齐，当前默认配置 7200 即 2 小时，
+// 见 config.JwtConfig.MfaAccessExpire），且携带 MFA 标记——刷新 token 时不会延长会话。
+func GenerateShortTokens(userID uint, username, schoolID string, ttlSeconds int64) (*TokenPair, error) {
+	now := time.Now()
+	jwtCfg := config.Global.Jwt
+
+	accessClaims := Claims{
+		UserID:   userID,
+		Username: username,
+		SchoolID: schoolID,
+		MFA:      true,
+		RegisteredClaims: jwt.RegisteredClaims{
+			ExpiresAt: jwt.NewNumericDate(now.Add(time.Duration(ttlSeconds) * time.Second)),
+			IssuedAt:  jwt.NewNumericDate(now),
+			Issuer:    "cpdaily-new",
+		},
+	}
+	accessToken, err := jwt.NewWithClaims(jwt.SigningMethodHS256, accessClaims).SignedString([]byte(jwtCfg.Secret))
+	if err != nil {
+		return nil, err
+	}
+
+	refreshClaims := accessClaims
+	refreshClaims.Issuer = "cpdaily-new-refresh"
+	refreshToken, err := jwt.NewWithClaims(jwt.SigningMethodHS256, refreshClaims).SignedString([]byte(jwtCfg.Secret))
+	if err != nil {
+		return nil, err
+	}
+
+	return &TokenPair{
+		AccessToken:  accessToken,
+		RefreshToken: refreshToken,
+		ExpiresIn:    ttlSeconds,
+	}, nil
+}
+
 func ValidateToken(tokenString string) (*Claims, error) {
 	claims := &Claims{}
 	token, err := jwt.ParseWithClaims(tokenString, claims, func(token *jwt.Token) (interface{}, error) {
@@ -73,6 +114,17 @@ func ValidateToken(tokenString string) (*Claims, error) {
 		return []byte(config.Global.Jwt.Secret), nil
 	})
 	if err != nil {
+		// MFA access token 服务端校验宽限：MFA 学校第三方会话无法自动续期（重登需人工
+		// 输入验证码），已签发 token 无法修改；当 MfaAccessExpire 调整（如 1h → 2h）时，
+		// 对调整前签发的 MFA access token 按「签发时间 + 当前配置 TTL」放行，使存量用户
+		// 无需重新登录、平滑过渡到新有效期。仅放宽 access（issuer=cpdaily-new）：
+		// refresh 严格按自身 exp 校验，避免出现刷新窗口导致会话被滑动静默续期，
+		// 违背 MFA 短会话设计。
+		if errors.Is(err, jwt.ErrTokenExpired) &&
+			claims.MFA && claims.Issuer == "cpdaily-new" && claims.IssuedAt != nil &&
+			time.Now().Before(claims.IssuedAt.Add(time.Duration(config.Global.Jwt.MfaAccessExpire)*time.Second)) {
+			return claims, nil
+		}
 		return nil, err
 	}
 	if !token.Valid {
@@ -86,6 +138,10 @@ func RefreshTokens(refreshToken string) (*TokenPair, error) {
 	if err != nil {
 		return nil, errors.New("refresh token invalid or expired")
 	}
+	// MFA 通道登录的用户：第三方会话无法自动续期，刷新也不延长有效期
+	if claims.MFA {
+		return GenerateShortTokens(claims.UserID, claims.Username, claims.SchoolID, int64(config.Global.Jwt.MfaAccessExpire))
+	}
 	// 刷新时生成全新 token 对
 	return GenerateTokens(claims.UserID, claims.Username, claims.SchoolID)
 }

backed/internal/service/jwt_test.go

@@ -0,0 +1,134 @@
+package service
+
+import (
+	"testing"
+	"time"
+
+	"cpdaily-new/internal/config"
+
+	"github.com/golang-jwt/jwt/v5"
+)
+
+// 测试配置：MFA TTL 2 小时（与当前生产配置一致）
+func setupJwtTestConfig() {
+	config.Global.Jwt.Secret = "unit-test-secret"
+	config.Global.Jwt.AccessExpire = 3600
+	config.Global.Jwt.RefreshExpire = 864000
+	config.Global.Jwt.MfaAccessExpire = 7200
+}
+
+// signClaims 用手写 Claims 直接签名，模拟不同时期/不同 TTL 签发的 token
+func signClaims(t *testing.T, secret string, claims Claims) string {
+	t.Helper()
+	s, err := jwt.NewWithClaims(jwt.SigningMethodHS256, claims).SignedString([]byte(secret))
+	if err != nil {
+		t.Fatalf("签名失败: %v", err)
+	}
+	return s
+}
+
+// mfaClaims 构造 MFA token Claims：iat 为签发时间，ttl 为签发时的有效期
+func mfaClaims(issuer string, iat time.Time, ttl time.Duration) Claims {
+	return Claims{
+		UserID:   1066,
+		Username: "ynu-20251960205",
+		SchoolID: "ynu",
+		MFA:      true,
+		RegisteredClaims: jwt.RegisteredClaims{
+			IssuedAt:  jwt.NewNumericDate(iat),
+			ExpiresAt: jwt.NewNumericDate(iat.Add(ttl)),
+			Issuer:    issuer,
+		},
+	}
+}
+
+// 场景1：1h 配置时代签发的 MFA access token 已过期 30 分钟，但在「签发时间+2h」宽限内 → 放行
+// （杨蕊宁存量 token 场景：部署 v1.2.39 后无需重新登录）
+func TestMFAOldAccessTokenWithinGrace(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	tokenStr := signClaims(t, config.Global.Jwt.Secret, mfaClaims("cpdaily-new", now.Add(-90*time.Minute), 1*time.Hour))
+	claims, err := ValidateToken(tokenStr)
+	if err != nil {
+		t.Fatalf("宽限窗口内(iat+2h)应放行: %v", err)
+	}
+	if claims.UserID != 1066 || !claims.MFA {
+		t.Fatalf("claims 解析异常: %+v", claims)
+	}
+}
+
+// 场景2：MFA access token 超出「签发时间+2h」宽限 → 拒绝
+func TestMFAOldAccessTokenBeyondGrace(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	tokenStr := signClaims(t, config.Global.Jwt.Secret, mfaClaims("cpdaily-new", now.Add(-150*time.Minute), 1*time.Hour))
+	if _, err := ValidateToken(tokenStr); err == nil {
+		t.Fatal("超出宽限窗口的 MFA access token 必须拒绝")
+	}
+}
+
+// 场景3：MFA refresh token 已过期 → 拒绝（refresh 不享受宽限，避免滑动续期）
+func TestMFAOldRefreshTokenNotGraced(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	tokenStr := signClaims(t, config.Global.Jwt.Secret, mfaClaims("cpdaily-new-refresh", now.Add(-90*time.Minute), 1*time.Hour))
+	if _, err := ValidateToken(tokenStr); err == nil {
+		t.Fatal("MFA refresh token 过期后必须拒绝（不得宽限）")
+	}
+}
+
+// 场景4：非 MFA 的普通 access token 过期 → 按原逻辑拒绝
+func TestNormalExpiredAccessTokenRejected(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	claims := Claims{
+		UserID:   1,
+		Username: "normal-user",
+		MFA:      false,
+		RegisteredClaims: jwt.RegisteredClaims{
+			IssuedAt:  jwt.NewNumericDate(now.Add(-90 * time.Minute)),
+			ExpiresAt: jwt.NewNumericDate(now.Add(-30 * time.Minute)),
+			Issuer:    "cpdaily-new",
+		},
+	}
+	if _, err := ValidateToken(signClaims(t, config.Global.Jwt.Secret, claims)); err == nil {
+		t.Fatal("普通用户过期 access token 必须拒绝")
+	}
+}
+
+// 场景5：正常有效期内（TTL=2h）的 MFA access token → 放行（常规路径不受影响）
+func TestMFAAccessTokenValidNormally(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	tokenStr := signClaims(t, config.Global.Jwt.Secret, mfaClaims("cpdaily-new", now.Add(-10*time.Minute), 2*time.Hour))
+	if _, err := ValidateToken(tokenStr); err != nil {
+		t.Fatalf("有效期内 MFA access token 应放行: %v", err)
+	}
+}
+
+// 场景6：错误签名 → 拒绝（宽限不得绕过签名校验）
+func TestMFAOldAccessTokenWrongSignatureRejected(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	tokenStr := signClaims(t, "wrong-secret", mfaClaims("cpdaily-new", now.Add(-90*time.Minute), 1*time.Hour))
+	if _, err := ValidateToken(tokenStr); err == nil {
+		t.Fatal("错误签名必须拒绝")
+	}
+}
+
+// 场景7：MFA access token 缺少签发时间（iat 缺失）→ 拒绝（无法核定宽限窗口）
+func TestMFAOldAccessTokenWithoutIssuedAtRejected(t *testing.T) {
+	setupJwtTestConfig()
+	now := time.Now()
+	claims := Claims{
+		UserID: 1066,
+		MFA:    true,
+		RegisteredClaims: jwt.RegisteredClaims{
+			ExpiresAt: jwt.NewNumericDate(now.Add(-30 * time.Minute)),
+			Issuer:    "cpdaily-new",
+		},
+	}
+	if _, err := ValidateToken(signClaims(t, config.Global.Jwt.Secret, claims)); err == nil {
+		t.Fatal("缺少 iat 的过期 MFA access token 必须拒绝")
+	}
+}

backed/internal/utils/response.go

@@ -6,6 +6,19 @@ import (
 	"github.com/gofiber/fiber/v2"
 )
 
+// MFA 多因子认证专用业务码：HTTP 200 返回，前端按 code 弹出验证码弹窗而非错误弹窗
+const (
+	CodeMFARequired             = 4281 // 登录触发多因子认证，Data 含 needMFA/mfaToken/expiresIn/authMethods（可用验证方式列表）
+	CodeMFAVerifyFailed         = 4282 // MFA 验证码错误或验证失败（弹窗保留可重试）
+	CodeMFAVerifySessionExpired = 4283 // MFA 验证会话不存在或已过期（前端应关闭弹窗引导重新登录）
+	CodeMFASendCodeFailed       = 4284 // MFA 验证码发送失败（弹窗保留在选择界面，可重试或更换验证方式）
+)
+
+// RespondWithCode 以 HTTP 200 返回指定业务码（MFA 等需要前端精确分支处理的状态）
+func RespondWithCode(c *fiber.Ctx, code int, msg string, data interface{}) error {
+	return c.JSON(Response{Code: code, Message: msg, Data: data})
+}
+
 // FormatFloat 格式化浮点数为字符串保留2位小数
 func FormatFloat(f float64) string {
 	return fmt.Sprintf("%.2f", f)

frondend/index.html

@@ -6,6 +6,28 @@
     <meta name="viewport" content="width=device-width, initial-scale=1.0, maximum-scale=1.0, user-scalable=no, viewport-fit=cover" />
     <meta name="theme-color" content="#f5f5f5" />
     <title>小助手</title>
+    <script>
+      // 老内核（Chrome 78~92，即微信 XWEB / 国产浏览器）缺失的 ES2022 运行时 API 补齐。
+      // 背景：reka-ui（其弹窗组件）与 @vueuse/shared 内部直接调用 Object.hasOwn
+      // （Chrome 93+），而 esbuild/vite 的 target 只降语法、不降运行时 API，
+      // 构建产物在 Chrome 78 上会在弹窗挂载时抛 TypeError。
+      // 该内联脚本先于 module 产物执行（module 默认 defer），故此处按需补齐即可；
+      // 现代内核因特性检测成立而跳过，零开销。写法保持 ES5，避免老内核解析失败。
+      ;(function () {
+        if (typeof Object.hasOwn !== 'function') {
+          Object.defineProperty(Object, 'hasOwn', {
+            value: function (obj, prop) {
+              if (obj === null || obj === undefined) {
+                throw new TypeError('Cannot convert undefined or null to object')
+              }
+              return Object.prototype.hasOwnProperty.call(Object(obj), prop)
+            },
+            configurable: true,
+            writable: true,
+          })
+        }
+      })()
+    </script>
     <script>
       // 暗色主题防闪烁：与 composables/useTheme.ts 保持同一时间规则
       // （18:00–次日 06:00 暗色），在首屏渲染前预设 html.dark 与状态栏色

frondend/package-lock.json

@@ -13,6 +13,7 @@
         "clsx": "^2.1.1",
         "lucide-vue-next": "^1.0.0",
         "qrcode": "^1.5.4",
+        "reka-ui": "^2.10.4",
         "tailwind-merge": "^3.5.0",
         "vue": "^3.5.30",
         "vue-router": "^5.0.4"
@@ -22,6 +23,7 @@
         "@types/node": "^26.0.1",
         "@types/qrcode": "^1.5.6",
         "@vitejs/plugin-vue": "^6.0.5",
+        "lightningcss": "^1.33.0",
         "tailwindcss": "^4.2.2",
         "typescript": "~5.9.3",
         "vite": "^8.0.1",
@@ -159,6 +161,79 @@
         "tslib": "^2.4.0"
       }
     },
+    "node_modules/@floating-ui/core": {
+      "version": "1.8.0",
+      "resolved": "https://registry.npmjs.org/@floating-ui/core/-/core-1.8.0.tgz",
+      "integrity": "sha512-0CIZ5itps/8x7BG8dEIhs53BvCUH2PCoogtakwRTut+Arm58sJooJ0AuZhLw2HJYIR5cMLNPBSS728sPho2khQ==",
+      "dependencies": {
+        "@floating-ui/utils": "^0.2.12"
+      }
+    },
+    "node_modules/@floating-ui/dom": {
+      "version": "1.8.0",
+      "resolved": "https://registry.npmjs.org/@floating-ui/dom/-/dom-1.8.0.tgz",
+      "integrity": "sha512-yXSrzeHZBTZadLOlfyhCkJHNeLJnHRnRInwdZ40L7ZiaAtrBwoYlsDrX3v5zB1Utk7CLfzcOVnVVWoXEky7Ceg==",
+      "dependencies": {
+        "@floating-ui/core": "^1.8.0",
+        "@floating-ui/utils": "^0.2.12"
+      }
+    },
+    "node_modules/@floating-ui/utils": {
+      "version": "0.2.12",
+      "resolved": "https://registry.npmjs.org/@floating-ui/utils/-/utils-0.2.12.tgz",
+      "integrity": "sha512-HpCo8tmWzLVad5s2d19EhAz5zqrrQ6s69qd6moPMQvkOuSwDT1YgRfWSVuc4ennqrgv3OHppiOGMQ7oC13yIww=="
+    },
+    "node_modules/@floating-ui/vue": {
+      "version": "1.1.11",
+      "resolved": "https://registry.npmjs.org/@floating-ui/vue/-/vue-1.1.11.tgz",
+      "integrity": "sha512-HzHKCNVxnGS35r9fCHBc3+uCnjw9IWIlCPL683cGgM9Kgj2BiAl8x1mS7vtvP6F9S/e/q4O6MApwSHj8hNLGfw==",
+      "dependencies": {
+        "@floating-ui/dom": "^1.7.6",
+        "@floating-ui/utils": "^0.2.11",
+        "vue-demi": ">=0.13.0"
+      }
+    },
+    "node_modules/@floating-ui/vue/node_modules/vue-demi": {
+      "version": "0.14.10",
+      "resolved": "https://registry.npmjs.org/vue-demi/-/vue-demi-0.14.10.tgz",
+      "integrity": "sha512-nMZBOwuzabUO0nLgIcc6rycZEebF6eeUfaiQx9+WSk8e29IbLvPU9feI6tqW4kTo3hvoYAJkMh8n8D0fuISphg==",
+      "hasInstallScript": true,
+      "bin": {
+        "vue-demi-fix": "bin/vue-demi-fix.js",
+        "vue-demi-switch": "bin/vue-demi-switch.js"
+      },
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/antfu"
+      },
+      "peerDependencies": {
+        "@vue/composition-api": "^1.0.0-rc.1",
+        "vue": "^3.0.0-0 || ^2.6.0"
+      },
+      "peerDependenciesMeta": {
+        "@vue/composition-api": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/@internationalized/date": {
+      "version": "3.12.4",
+      "resolved": "https://registry.npmjs.org/@internationalized/date/-/date-3.12.4.tgz",
+      "integrity": "sha512-M1dEn4c1U1HsSlaVR8upZtSqvXrTkHDfv18H01uCSJyjVLDxnBR38v/fMxecmlwXKR4i9HeZcmgQAPE6A+aGJQ==",
+      "dependencies": {
+        "@swc/helpers": "^0.5.0"
+      }
+    },
+    "node_modules/@internationalized/number": {
+      "version": "3.6.8",
+      "resolved": "https://registry.npmjs.org/@internationalized/number/-/number-3.6.8.tgz",
+      "integrity": "sha512-8UmMFia46DUt+k97zKd9fKWXcWHR+k8ae3eYzILETuT2KbIvLyOfac7zesw+sJdRAAZ7Q9pM1Mk22aXp2LD0Ig==",
+      "dependencies": {
+        "@swc/helpers": "^0.5.0"
+      }
+    },
     "node_modules/@jridgewell/gen-mapping": {
       "version": "0.3.13",
       "resolved": "https://registry.npmjs.org/@jridgewell/gen-mapping/-/gen-mapping-0.3.13.tgz",
@@ -474,6 +549,14 @@
       "integrity": "sha512-2j9bGt5Jh8hj+vPtgzPtl72j0yRxHAyumoo6TNfAjsLB04UtpSvPbPcDcBMxz7n+9CYB0c1GxQFxYRg2jimqGw==",
       "devOptional": true
     },
+    "node_modules/@swc/helpers": {
+      "version": "0.5.23",
+      "resolved": "https://registry.npmjs.org/@swc/helpers/-/helpers-0.5.23.tgz",
+      "integrity": "sha512-5lSsMOTXURePglDfvuAQUqkGek9Hg2kksOYay2m0+XR++b2NWYL/4sWyuvVBIs8oKnJaxkdi9whaL/sqN13afw==",
+      "dependencies": {
+        "tslib": "^2.8.0"
+      }
+    },
     "node_modules/@tailwindcss/node": {
       "version": "4.3.2",
       "resolved": "https://registry.npmjs.org/@tailwindcss/node/-/node-4.3.2.tgz",
@@ -489,6 +572,255 @@
         "tailwindcss": "4.3.2"
       }
     },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss/-/lightningcss-1.32.0.tgz",
+      "integrity": "sha512-NXYBzinNrblfraPGyrbPoD19C1h9lfI/1mzgWYvXUTe414Gz/X1FD2XBZSZM7rRTrMA8JL3OtAaGifrIKhQ5yQ==",
+      "dev": true,
+      "dependencies": {
+        "detect-libc": "^2.0.3"
+      },
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      },
+      "optionalDependencies": {
+        "lightningcss-android-arm64": "1.32.0",
+        "lightningcss-darwin-arm64": "1.32.0",
+        "lightningcss-darwin-x64": "1.32.0",
+        "lightningcss-freebsd-x64": "1.32.0",
+        "lightningcss-linux-arm-gnueabihf": "1.32.0",
+        "lightningcss-linux-arm64-gnu": "1.32.0",
+        "lightningcss-linux-arm64-musl": "1.32.0",
+        "lightningcss-linux-x64-gnu": "1.32.0",
+        "lightningcss-linux-x64-musl": "1.32.0",
+        "lightningcss-win32-arm64-msvc": "1.32.0",
+        "lightningcss-win32-x64-msvc": "1.32.0"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-android-arm64": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-android-arm64/-/lightningcss-android-arm64-1.32.0.tgz",
+      "integrity": "sha512-YK7/ClTt4kAK0vo6w3X+Pnm0D2cf2vPHbhOXdoNti1Ga0al1P4TBZhwjATvjNwLEBCnKvjJc2jQgHXH0NEwlAg==",
+      "cpu": [
+        "arm64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "android"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-darwin-arm64": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-darwin-arm64/-/lightningcss-darwin-arm64-1.32.0.tgz",
+      "integrity": "sha512-RzeG9Ju5bag2Bv1/lwlVJvBE3q6TtXskdZLLCyfg5pt+HLz9BqlICO7LZM7VHNTTn/5PRhHFBSjk5lc4cmscPQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-darwin-x64": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-darwin-x64/-/lightningcss-darwin-x64-1.32.0.tgz",
+      "integrity": "sha512-U+QsBp2m/s2wqpUYT/6wnlagdZbtZdndSmut/NJqlCcMLTWp5muCrID+K5UJ6jqD2BFshejCYXniPDbNh73V8w==",
+      "cpu": [
+        "x64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-freebsd-x64": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-freebsd-x64/-/lightningcss-freebsd-x64-1.32.0.tgz",
+      "integrity": "sha512-JCTigedEksZk3tHTTthnMdVfGf61Fky8Ji2E4YjUTEQX14xiy/lTzXnu1vwiZe3bYe0q+SpsSH/CTeDXK6WHig==",
+      "cpu": [
+        "x64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "freebsd"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-linux-arm-gnueabihf": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm-gnueabihf/-/lightningcss-linux-arm-gnueabihf-1.32.0.tgz",
+      "integrity": "sha512-x6rnnpRa2GL0zQOkt6rts3YDPzduLpWvwAF6EMhXFVZXD4tPrBkEFqzGowzCsIWsPjqSK+tyNEODUBXeeVHSkw==",
+      "cpu": [
+        "arm"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-linux-arm64-gnu": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-gnu/-/lightningcss-linux-arm64-gnu-1.32.0.tgz",
+      "integrity": "sha512-0nnMyoyOLRJXfbMOilaSRcLH3Jw5z9HDNGfT/gwCPgaDjnx0i8w7vBzFLFR1f6CMLKF8gVbebmkUN3fa/kQJpQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-linux-arm64-musl": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-musl/-/lightningcss-linux-arm64-musl-1.32.0.tgz",
+      "integrity": "sha512-UpQkoenr4UJEzgVIYpI80lDFvRmPVg6oqboNHfoH4CQIfNA+HOrZ7Mo7KZP02dC6LjghPQJeBsvXhJod/wnIBg==",
+      "cpu": [
+        "arm64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-linux-x64-gnu": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-gnu/-/lightningcss-linux-x64-gnu-1.32.0.tgz",
+      "integrity": "sha512-V7Qr52IhZmdKPVr+Vtw8o+WLsQJYCTd8loIfpDaMRWGUZfBOYEJeyJIkqGIDMZPwPx24pUMfwSxxI8phr/MbOA==",
+      "cpu": [
+        "x64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-linux-x64-musl": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-musl/-/lightningcss-linux-x64-musl-1.32.0.tgz",
+      "integrity": "sha512-bYcLp+Vb0awsiXg/80uCRezCYHNg1/l3mt0gzHnWV9XP1W5sKa5/TCdGWaR/zBM2PeF/HbsQv/j2URNOiVuxWg==",
+      "cpu": [
+        "x64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-win32-arm64-msvc": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-win32-arm64-msvc/-/lightningcss-win32-arm64-msvc-1.32.0.tgz",
+      "integrity": "sha512-8SbC8BR40pS6baCM8sbtYDSwEVQd4JlFTOlaD3gWGHfThTcABnNDBda6eTZeqbofalIJhFx0qKzgHJmcPTnGdw==",
+      "cpu": [
+        "arm64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
+    "node_modules/@tailwindcss/node/node_modules/lightningcss-win32-x64-msvc": {
+      "version": "1.32.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-win32-x64-msvc/-/lightningcss-win32-x64-msvc-1.32.0.tgz",
+      "integrity": "sha512-Amq9B/SoZYdDi1kFrojnoqPLxYhQ4Wo5XiL8EVJrVsB8ARoC1PWW6VGtT0WKCemjy8aC+louJnjS7U18x3b06Q==",
+      "cpu": [
+        "x64"
+      ],
+      "dev": true,
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": ">= 12.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/parcel"
+      }
+    },
     "node_modules/@tailwindcss/oxide": {
       "version": "4.3.2",
       "resolved": "https://registry.npmjs.org/@tailwindcss/oxide/-/oxide-4.3.2.tgz",
@@ -731,6 +1063,30 @@
         "vite": "^5.2.0 || ^6 || ^7 || ^8"
       }
     },
+    "node_modules/@tanstack/virtual-core": {
+      "version": "3.17.11",
+      "resolved": "https://registry.npmjs.org/@tanstack/virtual-core/-/virtual-core-3.17.11.tgz",
+      "integrity": "sha512-+ILjvtHup6Y2hzQ6YzwMgX1Q+oQpxEGOXCEsCNaPoIP0VxMbizIBTmYTDtkerkIQS8/CbP1BRuyt8V/8BCsy1g==",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/tannerlinsley"
+      }
+    },
+    "node_modules/@tanstack/vue-virtual": {
+      "version": "3.13.39",
+      "resolved": "https://registry.npmjs.org/@tanstack/vue-virtual/-/vue-virtual-3.13.39.tgz",
+      "integrity": "sha512-AG8sI+6nfrDvN6ixuHJL9LaJTf3//0V5VITZYW3UOaIuSVexnEzsbMu4LH/JhMfRTxwhUXPnLqkl1DlzkZbRtg==",
+      "dependencies": {
+        "@tanstack/virtual-core": "3.17.11"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/tannerlinsley"
+      },
+      "peerDependencies": {
+        "vue": "^2.7.0 || ^3.0.0"
+      }
+    },
     "node_modules/@tybys/wasm-util": {
       "version": "0.10.3",
       "resolved": "https://registry.npmjs.org/@tybys/wasm-util/-/wasm-util-0.10.3.tgz",
@@ -764,6 +1120,11 @@
         "@types/node": "*"
       }
     },
+    "node_modules/@types/web-bluetooth": {
+      "version": "0.0.21",
+      "resolved": "https://registry.npmjs.org/@types/web-bluetooth/-/web-bluetooth-0.0.21.tgz",
+      "integrity": "sha512-oIQLCGWtcFZy2JW77j9k8nHzAOpqMHLQejDA48XXMWH6tjCQHz5RCFz1bzsmROyL6PUm+LLnUiI4BCn221inxA=="
+    },
     "node_modules/@vitejs/plugin-vue": {
       "version": "6.0.7",
       "resolved": "https://registry.npmjs.org/@vitejs/plugin-vue/-/plugin-vue-6.0.7.tgz",
@@ -962,6 +1323,41 @@
       "resolved": "https://registry.npmjs.org/@vue/shared/-/shared-3.5.39.tgz",
       "integrity": "sha512-l1rrBtBfTnmxvtsvdQDXltUUy8S1Y+ZaqdfUzmAnJkTd8Z8rv5v/ytW+TKiqEOWyHPoqtPlNFSs0lhRmYVSHVA=="
     },
+    "node_modules/@vueuse/core": {
+      "version": "14.4.0",
+      "resolved": "https://registry.npmjs.org/@vueuse/core/-/core-14.4.0.tgz",
+      "integrity": "sha512-X4WHz1HlCzCBoYXesUkifzzWBAcZgXG8Fi5iNPQg/epdzOB3gu8Fawj3hvuwYR1nGcXGnvxwYYcUC/71++svtQ==",
+      "dependencies": {
+        "@types/web-bluetooth": "^0.0.21",
+        "@vueuse/metadata": "14.4.0",
+        "@vueuse/shared": "14.4.0"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/antfu"
+      },
+      "peerDependencies": {
+        "vue": "^3.5.0"
+      }
+    },
+    "node_modules/@vueuse/metadata": {
+      "version": "14.4.0",
+      "resolved": "https://registry.npmjs.org/@vueuse/metadata/-/metadata-14.4.0.tgz",
+      "integrity": "sha512-swx/255R6JyHZFJhx845iz5CRWDZdCfvkZOpACWc5+c5WHcG24mv8gUT1WIdFQaHt6dq79rvILd9QnCWiyVm9g==",
+      "funding": {
+        "url": "https://github.com/sponsors/antfu"
+      }
+    },
+    "node_modules/@vueuse/shared": {
+      "version": "14.4.0",
+      "resolved": "https://registry.npmjs.org/@vueuse/shared/-/shared-14.4.0.tgz",
+      "integrity": "sha512-JRgY90Sz8DDtPMsaDflvPMp9xYk69JZAmbuDvAquUVXKr2gEjqtzGNTTthLfckH0BzBqvnu31gb4a8TGLRe79g==",
+      "funding": {
+        "url": "https://github.com/sponsors/antfu"
+      },
+      "peerDependencies": {
+        "vue": "^3.5.0"
+      }
+    },
     "node_modules/acorn": {
       "version": "8.17.0",
       "resolved": "https://registry.npmjs.org/acorn/-/acorn-8.17.0.tgz",
@@ -1012,6 +1408,17 @@
         "url": "https://github.com/chalk/ansi-styles?sponsor=1"
       }
     },
+    "node_modules/aria-hidden": {
+      "version": "1.2.6",
+      "resolved": "https://registry.npmjs.org/aria-hidden/-/aria-hidden-1.2.6.tgz",
+      "integrity": "sha512-ik3ZgC9dY/lYVVM++OISsaYDeg1tb0VtP5uL3ouh1koGOaUMDPpbFIei4JkFimWUFPn90sbMNMXQAIVOlnYKJA==",
+      "dependencies": {
+        "tslib": "^2.0.0"
+      },
+      "engines": {
+        "node": ">=10"
+      }
+    },
     "node_modules/ast-kit": {
       "version": "2.2.0",
       "resolved": "https://registry.npmjs.org/ast-kit/-/ast-kit-2.2.0.tgz",
@@ -1191,6 +1598,11 @@
         "node": ">=0.10.0"
       }
     },
+    "node_modules/defu": {
+      "version": "6.1.7",
+      "resolved": "https://registry.npmjs.org/defu/-/defu-6.1.7.tgz",
+      "integrity": "sha512-7z22QmUWiQ/2d0KkdYmANbRUVABpZ9SNYyH5vx6PZ+nE5bcC0l7uFvEfHlyld/HcGBFTL536ClDt3DEcSlEJAQ=="
+    },
     "node_modules/delayed-stream": {
       "version": "1.0.0",
       "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz",
@@ -1543,9 +1955,9 @@
       }
     },
     "node_modules/lightningcss": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss/-/lightningcss-1.32.0.tgz",
-      "integrity": "sha512-NXYBzinNrblfraPGyrbPoD19C1h9lfI/1mzgWYvXUTe414Gz/X1FD2XBZSZM7rRTrMA8JL3OtAaGifrIKhQ5yQ==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss/-/lightningcss-1.33.0.tgz",
+      "integrity": "sha512-WkUDrojuJs0xkgGf2udWxa3yGBRxPtxUkB79i6aCZLRgc7PM8fZe9TosfPDcvEpQZbuFASnHYmRLBLUbmLOIIA==",
       "devOptional": true,
       "dependencies": {
         "detect-libc": "^2.0.3"
@@ -1558,23 +1970,23 @@
         "url": "https://opencollective.com/parcel"
       },
       "optionalDependencies": {
-        "lightningcss-android-arm64": "1.32.0",
-        "lightningcss-darwin-arm64": "1.32.0",
-        "lightningcss-darwin-x64": "1.32.0",
-        "lightningcss-freebsd-x64": "1.32.0",
-        "lightningcss-linux-arm-gnueabihf": "1.32.0",
-        "lightningcss-linux-arm64-gnu": "1.32.0",
-        "lightningcss-linux-arm64-musl": "1.32.0",
-        "lightningcss-linux-x64-gnu": "1.32.0",
-        "lightningcss-linux-x64-musl": "1.32.0",
-        "lightningcss-win32-arm64-msvc": "1.32.0",
-        "lightningcss-win32-x64-msvc": "1.32.0"
+        "lightningcss-android-arm64": "1.33.0",
+        "lightningcss-darwin-arm64": "1.33.0",
+        "lightningcss-darwin-x64": "1.33.0",
+        "lightningcss-freebsd-x64": "1.33.0",
+        "lightningcss-linux-arm-gnueabihf": "1.33.0",
+        "lightningcss-linux-arm64-gnu": "1.33.0",
+        "lightningcss-linux-arm64-musl": "1.33.0",
+        "lightningcss-linux-x64-gnu": "1.33.0",
+        "lightningcss-linux-x64-musl": "1.33.0",
+        "lightningcss-win32-arm64-msvc": "1.33.0",
+        "lightningcss-win32-x64-msvc": "1.33.0"
       }
     },
     "node_modules/lightningcss-android-arm64": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-android-arm64/-/lightningcss-android-arm64-1.32.0.tgz",
-      "integrity": "sha512-YK7/ClTt4kAK0vo6w3X+Pnm0D2cf2vPHbhOXdoNti1Ga0al1P4TBZhwjATvjNwLEBCnKvjJc2jQgHXH0NEwlAg==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-android-arm64/-/lightningcss-android-arm64-1.33.0.tgz",
+      "integrity": "sha512-gEpRTalKdosp4Bb8qWtc2iOgE5SeIHlpS1up9bFq2wAyYhl1UdTObYiHe98zEM9SQvSoqQZ1IQD0JNpg3Ml5pg==",
       "cpu": [
         "arm64"
       ],
@@ -1592,9 +2004,9 @@
       }
     },
     "node_modules/lightningcss-darwin-arm64": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-darwin-arm64/-/lightningcss-darwin-arm64-1.32.0.tgz",
-      "integrity": "sha512-RzeG9Ju5bag2Bv1/lwlVJvBE3q6TtXskdZLLCyfg5pt+HLz9BqlICO7LZM7VHNTTn/5PRhHFBSjk5lc4cmscPQ==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-darwin-arm64/-/lightningcss-darwin-arm64-1.33.0.tgz",
+      "integrity": "sha512-Sciaz8eenNTKn9b3t7+xr0ipTp9YxKQY4npwQ3mrRuL0BAVHBLyZxofhaKBAVtzmtRZ/zTyo0/to4B1uWG/Djg==",
       "cpu": [
         "arm64"
       ],
@@ -1612,9 +2024,9 @@
       }
     },
     "node_modules/lightningcss-darwin-x64": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-darwin-x64/-/lightningcss-darwin-x64-1.32.0.tgz",
-      "integrity": "sha512-U+QsBp2m/s2wqpUYT/6wnlagdZbtZdndSmut/NJqlCcMLTWp5muCrID+K5UJ6jqD2BFshejCYXniPDbNh73V8w==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-darwin-x64/-/lightningcss-darwin-x64-1.33.0.tgz",
+      "integrity": "sha512-Z5UPAxzrjlWNNyGy6i65cJzzvgJ5D3T6wMvs+gWpY9d7qRhANrxqAp6LhxIgZhWEw18RfJTGcRxjuLIBr+m8XQ==",
       "cpu": [
         "x64"
       ],
@@ -1632,9 +2044,9 @@
       }
     },
     "node_modules/lightningcss-freebsd-x64": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-freebsd-x64/-/lightningcss-freebsd-x64-1.32.0.tgz",
-      "integrity": "sha512-JCTigedEksZk3tHTTthnMdVfGf61Fky8Ji2E4YjUTEQX14xiy/lTzXnu1vwiZe3bYe0q+SpsSH/CTeDXK6WHig==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-freebsd-x64/-/lightningcss-freebsd-x64-1.33.0.tgz",
+      "integrity": "sha512-QQM/Ti/hQajJwCY+RiWuCZ9sdtI/XQk7nDK5vC8kkdwixezOlDgvDx7+RT+QjK6FcFT4MpsuoBnHIo/O3StRRg==",
       "cpu": [
         "x64"
       ],
@@ -1652,9 +2064,9 @@
       }
     },
     "node_modules/lightningcss-linux-arm-gnueabihf": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm-gnueabihf/-/lightningcss-linux-arm-gnueabihf-1.32.0.tgz",
-      "integrity": "sha512-x6rnnpRa2GL0zQOkt6rts3YDPzduLpWvwAF6EMhXFVZXD4tPrBkEFqzGowzCsIWsPjqSK+tyNEODUBXeeVHSkw==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm-gnueabihf/-/lightningcss-linux-arm-gnueabihf-1.33.0.tgz",
+      "integrity": "sha512-N7FVBe6iS24MlM6R/4RBTxGhQheZGs7tiQ9U32UtF75NzP5Q7xWPRqLBCKxlRQRk3rY1jCIPLzx7WzOhuUIRLQ==",
       "cpu": [
         "arm"
       ],
@@ -1672,9 +2084,9 @@
       }
     },
     "node_modules/lightningcss-linux-arm64-gnu": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-gnu/-/lightningcss-linux-arm64-gnu-1.32.0.tgz",
-      "integrity": "sha512-0nnMyoyOLRJXfbMOilaSRcLH3Jw5z9HDNGfT/gwCPgaDjnx0i8w7vBzFLFR1f6CMLKF8gVbebmkUN3fa/kQJpQ==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-gnu/-/lightningcss-linux-arm64-gnu-1.33.0.tgz",
+      "integrity": "sha512-j2v/itmy4HlNxlc6voKXYgBqNi0Ng2LShg4z7GufpEgs05P+2suBVyi9I6YHq5uoVFx9ETin3eCEhLVyXGQnKg==",
       "cpu": [
         "arm64"
       ],
@@ -1692,9 +2104,9 @@
       }
     },
     "node_modules/lightningcss-linux-arm64-musl": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-musl/-/lightningcss-linux-arm64-musl-1.32.0.tgz",
-      "integrity": "sha512-UpQkoenr4UJEzgVIYpI80lDFvRmPVg6oqboNHfoH4CQIfNA+HOrZ7Mo7KZP02dC6LjghPQJeBsvXhJod/wnIBg==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-arm64-musl/-/lightningcss-linux-arm64-musl-1.33.0.tgz",
+      "integrity": "sha512-yiO5ROMuYQgXbC60yjZU5CYSFZGKXL0HFATXt9mHJn1+zW55oCtMI9NfcVhYLMFDL7gV7oBPon/EmMMGg2OvtQ==",
       "cpu": [
         "arm64"
       ],
@@ -1712,9 +2124,9 @@
       }
     },
     "node_modules/lightningcss-linux-x64-gnu": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-gnu/-/lightningcss-linux-x64-gnu-1.32.0.tgz",
-      "integrity": "sha512-V7Qr52IhZmdKPVr+Vtw8o+WLsQJYCTd8loIfpDaMRWGUZfBOYEJeyJIkqGIDMZPwPx24pUMfwSxxI8phr/MbOA==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-gnu/-/lightningcss-linux-x64-gnu-1.33.0.tgz",
+      "integrity": "sha512-ar+Ju7LmcN0Jo4FpL4hpFybwNG9/3A/Br5KW2n2jyODg3MEZXaDYADdemoNS+BDNfMgKvylJLj4S5tyRActuAg==",
       "cpu": [
         "x64"
       ],
@@ -1732,9 +2144,9 @@
       }
     },
     "node_modules/lightningcss-linux-x64-musl": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-musl/-/lightningcss-linux-x64-musl-1.32.0.tgz",
-      "integrity": "sha512-bYcLp+Vb0awsiXg/80uCRezCYHNg1/l3mt0gzHnWV9XP1W5sKa5/TCdGWaR/zBM2PeF/HbsQv/j2URNOiVuxWg==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-linux-x64-musl/-/lightningcss-linux-x64-musl-1.33.0.tgz",
+      "integrity": "sha512-RYiYbkokw0trfKqqzfF55lginwEPrD3OJDfTuJzFs1MK6iFnDenaz1fqLLtX4ITG3OktJQXOeTaw1awrBAlZPw==",
       "cpu": [
         "x64"
       ],
@@ -1752,9 +2164,9 @@
       }
     },
     "node_modules/lightningcss-win32-arm64-msvc": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-win32-arm64-msvc/-/lightningcss-win32-arm64-msvc-1.32.0.tgz",
-      "integrity": "sha512-8SbC8BR40pS6baCM8sbtYDSwEVQd4JlFTOlaD3gWGHfThTcABnNDBda6eTZeqbofalIJhFx0qKzgHJmcPTnGdw==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-win32-arm64-msvc/-/lightningcss-win32-arm64-msvc-1.33.0.tgz",
+      "integrity": "sha512-1K+MPfLSFVpphzpdbfkhlWk6wBrTObBzS2T6db10PNOZgR9GoVsAWzwNyuhUYYbTp23j+4RrncfujZ4uAzXvwA==",
       "cpu": [
         "arm64"
       ],
@@ -1772,9 +2184,9 @@
       }
     },
     "node_modules/lightningcss-win32-x64-msvc": {
-      "version": "1.32.0",
-      "resolved": "https://registry.npmjs.org/lightningcss-win32-x64-msvc/-/lightningcss-win32-x64-msvc-1.32.0.tgz",
-      "integrity": "sha512-Amq9B/SoZYdDi1kFrojnoqPLxYhQ4Wo5XiL8EVJrVsB8ARoC1PWW6VGtT0WKCemjy8aC+louJnjS7U18x3b06Q==",
+      "version": "1.33.0",
+      "resolved": "https://registry.npmjs.org/lightningcss-win32-x64-msvc/-/lightningcss-win32-x64-msvc-1.33.0.tgz",
+      "integrity": "sha512-OlEICDx/Xl0FqSp4bry8zFnCvGpig3Gl4gCquvYwHuqJKEC1+n9NgDniFvqHGmMv1ZkqDJrDqKKSykTDX+ehuA==",
       "cpu": [
         "x64"
       ],
@@ -1929,6 +2341,11 @@
         "node": "^10 || ^12 || ^13.7 || ^14 || >=15.0.1"
       }
     },
+    "node_modules/ohash": {
+      "version": "2.0.12",
+      "resolved": "https://registry.npmjs.org/ohash/-/ohash-2.0.12.tgz",
+      "integrity": "sha512-65S/5gk9YSsaRjcyf7Nfa6h/d3E8/1gslpXfI4W7Dxn/oap8IKRuNT5VXkLQ1YFKIEg4apRY4Pj6aiwFzrDdmw=="
+    },
     "node_modules/p-limit": {
       "version": "2.3.0",
       "resolved": "https://registry.npmjs.org/p-limit/-/p-limit-2.3.0.tgz",
@@ -2098,6 +2515,30 @@
         "url": "https://paulmillr.com/funding/"
       }
     },
+    "node_modules/reka-ui": {
+      "version": "2.10.4",
+      "resolved": "https://registry.npmjs.org/reka-ui/-/reka-ui-2.10.4.tgz",
+      "integrity": "sha512-kbS5GAbkHkYj0EVKAg5ZPEPndhBjeUFSa1Aq5m5ftQwyHnB1v5tw8X6fcwfKH/ry3StPXblMWM1DW82MVS71cw==",
+      "dependencies": {
+        "@floating-ui/dom": "^1.6.13",
+        "@floating-ui/vue": "^1.1.6",
+        "@internationalized/date": "^3.5.0",
+        "@internationalized/number": "^3.5.0",
+        "@tanstack/vue-virtual": "^3.12.0",
+        "@vueuse/core": "^14.1.0",
+        "@vueuse/shared": "^14.1.0",
+        "aria-hidden": "^1.2.4",
+        "defu": "^6.1.5",
+        "ohash": "^2.0.11"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/zernonia"
+      },
+      "peerDependencies": {
+        "vue": ">= 3.4.0"
+      }
+    },
     "node_modules/require-directory": {
       "version": "2.1.1",
       "resolved": "https://registry.npmjs.org/require-directory/-/require-directory-2.1.1.tgz",
@@ -2232,9 +2673,7 @@
     "node_modules/tslib": {
       "version": "2.8.1",
       "resolved": "https://registry.npmjs.org/tslib/-/tslib-2.8.1.tgz",
-      "integrity": "sha512-oJFu94HQb+KVduSUQL7wnpmqnfmLsOA/nAh6b6EH0wCEoK0/mPeXU6c3wKDV83MkOuHPRHtSXKKU99IBazS/2w==",
-      "dev": true,
-      "optional": true
+      "integrity": "sha512-oJFu94HQb+KVduSUQL7wnpmqnfmLsOA/nAh6b6EH0wCEoK0/mPeXU6c3wKDV83MkOuHPRHtSXKKU99IBazS/2w=="
     },
     "node_modules/typescript": {
       "version": "5.9.3",

frondend/package.json

@@ -5,7 +5,7 @@
   "type": "module",
   "scripts": {
     "dev": "vite",
-    "build": "vite build",
+    "build": "vite build && node scripts/postbuild-css.mjs",
     "preview": "vite preview"
   },
   "dependencies": {
@@ -14,6 +14,7 @@
     "clsx": "^2.1.1",
     "lucide-vue-next": "^1.0.0",
     "qrcode": "^1.5.4",
+    "reka-ui": "^2.10.4",
     "tailwind-merge": "^3.5.0",
     "vue": "^3.5.30",
     "vue-router": "^5.0.4"
@@ -23,6 +24,7 @@
     "@types/node": "^26.0.1",
     "@types/qrcode": "^1.5.6",
     "@vitejs/plugin-vue": "^6.0.5",
+    "lightningcss": "^1.33.0",
     "tailwindcss": "^4.2.2",
     "typescript": "~5.9.3",
     "vite": "^8.0.1",

frondend/scripts/postbuild-css.mjs

@@ -0,0 +1,152 @@
+// 老内核兼容后处理（构建期执行）：
+//
+// 背景：Tailwind v4 的产物大量使用较新的 CSS 能力，老内核（国产浏览器/微信内置
+// 内核，实测线上存在 Chrome 78/85/91/97）会丢弃不认识的部分，表现为“只剩基础
+// 元素、没有样式”。逐项处理如下：
+//
+//   ① CSS 级联层 @layer（Chrome 99+）：老内核不认识该 at-rule，会把整块工具类
+//      直接丢弃 —— 这是“无样式”的主因，必须剥离；
+//   ② oklch() 颜色（Chrome 111+）：降级为十六进制色值（lightningcss）；
+//   ③ :where() 选择器（Chrome 88+）：其特异性为 0 的设计依赖较新引擎，
+//      老内核整条规则丢弃；解包为等价选择器（保持原有特异性位置）；
+//   ④ JS 语法（可选链等）由 vite build.target 统一降级，不在此处处理。
+//
+// 处理顺序：先解包 :where（lightningcss 不处理它），再整体按目标内核降级，
+// 最后剥离 @layer 并做完整性校验。
+import { readdir, readFile, writeFile } from 'node:fs/promises'
+import { join, resolve } from 'node:path'
+import { transform } from 'lightningcss'
+
+const assetsDir = resolve(process.cwd(), 'dist/assets')
+
+// lightningcss 目标版本：Chrome 78（微信 XWEB 常见下限，线上真实存在）
+const TARGETS = {
+  chrome: 78 << 16,
+  safari: 12 << 16,
+  ios_saf: 12 << 16,
+  android: 78 << 16,
+}
+
+/** 解包 :where(...) → 内部选择器（老内核不支持 :where，会整条丢弃规则） */
+function unwrapWhere(css) {
+  let out = ''
+  let i = 0
+  while (i < css.length) {
+    const m = css.indexOf(':where(', i)
+    if (m < 0) {
+      out += css.slice(i)
+      break
+    }
+    // 避免误伤字符串/注释中的 :where（本项目 CSS 产物中无此类内容，保守处理仍做括号配对）
+    out += css.slice(i, m)
+    let depth = 0
+    let end = -1
+    for (let k = m + 6; k < css.length; k++) {
+      if (css[k] === '(') depth++
+      else if (css[k] === ')') {
+        depth--
+        if (depth === 0) {
+          end = k
+          break
+        }
+      }
+    }
+    if (end < 0) {
+      out += css.slice(m)
+      break
+    }
+    out += css.slice(m + 7, end) // 去掉 ":where(" 与末端 ")"
+    i = end + 1
+  }
+  return out
+}
+
+/** 剥离 @layer 包裹：保留块内规则与顺序（层叠仍由源顺序 + 选择器优先级决定） */
+function unwrapCascadeLayers(css) {
+  let out = css
+  const re = /@layer\s+[A-Za-z0-9_,\s-]+?\{/g
+
+  // 反复处理，兼容理论上的嵌套 @layer
+  for (let pass = 0; pass < 8; pass++) {
+    const heads = []
+    let m
+    re.lastIndex = 0
+    while ((m = re.exec(out)) !== null) {
+      heads.push({ head: m.index, bodyStart: re.lastIndex - 1 })
+    }
+    if (heads.length === 0) break
+
+    for (let i = heads.length - 1; i >= 0; i--) {
+      const { head, bodyStart } = heads[i]
+      let depth = 0
+      let end = -1
+      for (let k = bodyStart; k < out.length; k++) {
+        if (out[k] === '{') depth++
+        else if (out[k] === '}') {
+          depth--
+          if (depth === 0) {
+            end = k
+            break
+          }
+        }
+      }
+      if (end < 0) continue
+      out = out.slice(0, head) + out.slice(bodyStart + 1, end) + out.slice(end + 1)
+    }
+  }
+
+  // 移除裸 @layer 声明语句（如 `@layer components;`）
+  out = out.replace(/@layer\s+[A-Za-z0-9_,\s-]+;/g, '')
+  return out
+}
+
+/** 校验：括号闭合（剥离过程中出现异常时立刻失败，避免把坏 CSS 发上线） */
+function assertBalanced(css, file) {
+  let depth = 0
+  for (const ch of css) {
+    if (ch === '{') depth++
+    else if (ch === '}') {
+      depth--
+      if (depth < 0) throw new Error(`[postbuild-css] ${file} 括号不闭合（出现多余的 }）`)
+    }
+  }
+  if (depth !== 0) throw new Error(`[postbuild-css] ${file} 括号不闭合（缺少 ${depth} 个 }）`)
+}
+
+const files = (await readdir(assetsDir)).filter((f) => f.endsWith('.css'))
+if (files.length === 0) {
+  throw new Error('[postbuild-css] dist/assets 下未找到 CSS 产物，构建流程异常')
+}
+
+for (const file of files) {
+  const path = join(assetsDir, file)
+  const src = await readFile(path)
+
+  // ① 解包 :where()（lightningcss 不会处理它，需先做）
+  let prepared = Buffer.from(unwrapWhere(src.toString('utf8')))
+  const whereCount = (src.toString('utf8').match(/:where\(/g) || []).length
+
+  // ② 按目标内核降级（oklch 等新颜色函数 → 老内核可识别的色值）
+  const { code } = transform({
+    filename: file,
+    code: prepared,
+    minify: true,
+    targets: TARGETS,
+  })
+  let out = code.toString()
+
+  // ③ 剥离 @layer 包裹
+  out = unwrapCascadeLayers(out)
+
+  // ④ 兜底校验：任何一项残留都说明处理逻辑失效，直接失败避免上线残缺样式
+  if (/@layer/.test(out)) throw new Error(`[postbuild-css] ${file} 仍残留 @layer`)
+  if (/oklch\(/.test(out)) throw new Error(`[postbuild-css] ${file} 仍残留 oklch(`)
+  if (/:where\(/.test(out)) throw new Error(`[postbuild-css] ${file} 仍残留 :where(`)
+  assertBalanced(out, file)
+
+  await writeFile(path, out)
+  console.log(
+    `[postbuild-css] ${file}: ${src.length} → ${out.length} bytes` +
+      `（解包 ${whereCount} 处 :where + 降级颜色 + 剥离 @layer）`
+  )
+}

frondend/src/App.vue

@@ -2,6 +2,7 @@
 import { watch } from 'vue'
 import { useRoute } from 'vue-router'
 import { useMessage } from '@/composables/useMessage'
+import UpdateChecker from '@/components/UpdateChecker.vue'
 
 const route = useRoute()
 const { toasts, removeToast } = useMessage()
@@ -26,6 +27,9 @@ watch(
 <template>
   <router-view />
 
+  <!-- 全局新版本检测（无 UI，发现更新时弹窗提示刷新） -->
+  <UpdateChecker />
+
   <!-- Toast 容器 -->
   <Teleport to="body">
     <div class="fixed top-4 right-4 z-[100] flex flex-col gap-2 max-w-sm">

frondend/src/api/admin.ts

@@ -381,12 +381,14 @@ export interface AdminTaskLogItem {
   username: string
   realName: string
   schoolName: string
-  taskType: string // sign / sleep_check
+  taskType: string // sign / sleep_check / leave_apply / leave_report
   title: string
   realTitle: string
   isSuccess: boolean
   errorMessage: string
   createdAt: string
+  deleted: boolean // 用户已在客户端删除（软删除），仅后台可见
+  source: number // 1=签到/查寝 2=请假/销假（两表 id 独立自增，列表 key 需组合）
 }
 
 export interface AdminTaskLogResult {

frondend/src/api/auth.ts

@@ -94,6 +94,51 @@ export function login(params: LoginParams) {
   return api.post<{ data: LoginResult }>('/auth/login', params)
 }
 
+/** MFA 可用验证方式（登录返回 4281 后由后端给出） */
+export interface MFAAuthMethod {
+  /** reAuthType 编码：3=短信 4=企业微信 5=今日校园 11=邮箱 12=钉钉 13=WeLink 15=公众号 */
+  type: string
+  /** 展示名（如「今日校园验证码」） */
+  name: string
+  /** 是否为页面默认选中项 */
+  default?: boolean
+}
+
+/** MFA 发送验证码参数（用户选定验证方式后调用） */
+export interface MFASendCodeParams {
+  mfaToken: string
+  reAuthType: string
+}
+
+/** MFA 验证码发送结果 */
+export interface MFASendCodeResult {
+  /** 收码目标（手机号等，可能带掩码） */
+  mobile?: string
+  /** 可再次发送的倒计时秒数 */
+  codeTime?: number
+}
+
+/** 发送多因子认证验证码（用户选择验证方式后调用）
+ * 业务码约定（HTTP 200）：0=发送成功进入输入阶段；4283=会话过期需重新登录；4284=发送失败可重试 */
+export function sendMFACode(params: MFASendCodeParams) {
+  return api.post<{ code: number; message: string; data?: MFASendCodeResult }>(
+    '/auth/login/mfa/send',
+    params
+  )
+}
+
+/** MFA 验证码提交参数 */
+export interface MFAVerifyParams {
+  mfaToken: string
+  code: string
+}
+
+/** 提交多因子认证验证码（登录返回 code 4281 后调用）
+ * 业务码约定（HTTP 200）：0=成功；4281=需MFA；4282=验证码错误可重试；4283=会话过期需重新登录 */
+export function verifyMFA(params: MFAVerifyParams) {
+  return api.post<{ code: number; message: string; data?: LoginResult }>('/auth/login/mfa', params)
+}
+
 /** 刷新 token */
 export function refreshToken(refreshToken: string) {
   return api.post<{ data: { accessToken: string; refreshToken: string } }>(
@@ -155,12 +200,15 @@ export interface TaskInfo {
   realTitle: string
   signWid: string
   signInstanceWid: string
-  formData: string
+  /** 列表接口不再返回（可能达 MB 级）；需要时走 getTaskSavedForm */
+  formData?: string
   taskStatus: string
   errorMessage: string
   createdAt: string
   updatedAt: string
   matchStatus: string
+  /** 服务端预计算的「必填但为空」字段标题，替代前端解析 formData */
+  missingFields?: string[]
 }
 
 export interface TaskTitleItem {
@@ -196,11 +244,21 @@ export function createTask(params: { taskType: string; title: string; realTitle:
   return api.post<{ data: TaskInfo }>('/task/create', params)
 }
 
-/** 获取任务表单 */
+/** 获取任务表单（从今日校园重新拉取模板，不含用户已填值） */
 export function getTaskForm(id: number) {
   return api.get<{ data: { formItems: FormItem[]; realTitle: string; isPhoto: boolean } }>(`/task/form/${id}`)
 }
 
+/** 获取该任务已保存的表单内容（编辑弹窗预填用，避免列表接口携带大字段） */
+export function getTaskSavedForm(id: number) {
+  return api.get<{ data: { formData: string } }>(`/task/form-data/${id}`)
+}
+
+/** 解析签到二维码（图片 dataURI / http 链接 / 纯 uuid），返回其中的 uuid */
+export function decodeQr(content: string) {
+  return api.post<{ data: { uuid: string } }>('/task/qr/decode', { content })
+}
+
 /** 保存任务表单 */
 export function saveTaskForm(id: number, formData: FormItem[]) {
   return api.post(`/task/form/${id}`, { formData })

frondend/src/api/leave.ts

@@ -0,0 +1,272 @@
+import api from './index'
+
+// ======== 类型定义 ========
+
+/** 学校规定的销假位置（详情 reportPlaces） */
+export interface LeaveReportPlace {
+  wid: string
+  address: string
+  longitude: string
+  latitude: string
+  /** 允许范围半径（米）：销假定位需在该位置半径内 */
+  radius: string
+  /** 位置设置人 */
+  counName: string
+}
+
+/** 待销假记录（含规定销假位置与销假开关） */
+export interface LeaveItem {
+  id: string
+  leaveType: string
+  reason: string
+  createTime: string
+  actEndTime: string
+  status: string
+  /** 状态文案（服务端权威映射，新套学校返回；旧套为空时前端本地映射兜底） */
+  statusText?: string
+  /** 学校规定的销假位置列表；为空时需用户手动输入 */
+  reportPlaces: LeaveReportPlace[]
+  /** 该请假类型销假是否需要选择审批人（leaveType.reportApplyFlow=1） */
+  reportApplyFlow: boolean
+  /** 该请假类型销假是否允许上传图片（leaveType.enableAttach=1） */
+  enableAttach: boolean
+}
+
+/** 销假可选审批人 */
+export interface LeaveApprover {
+  userWid: string
+  userId: string
+  userName: string
+}
+
+/** 销假执行参数 */
+export interface ExecuteLeaveParams {
+  leaveId: string
+  longitude: string
+  latitude: string
+  address: string
+  imageUrl?: string
+  /** reportApplyFlow=true 时必填 */
+  approverWid?: string
+}
+
+/** 销假日志 */
+export interface LeaveLog {
+  id: number
+  userId: number
+  leaveId: string
+  title: string
+  schoolName: string
+  /** report=销假 / apply=请假 */
+  action: string
+  isSuccess: boolean
+  errorMessage: string
+  createdAt: string
+  updatedAt: string
+}
+
+/** 请假类型（已合并 queryLeaveTypeCfg 的权威开关） */
+export interface LeaveType {
+  code: number
+  name: string
+  /** 1=必须离校 */
+  mustOut: number
+  /** 1=需要选择审批人 */
+  needApproval: number
+  /** 1=允许上传图片附件 */
+  enableAttach: number
+  /** 请假原因最少字数 */
+  reasonWordLimit: number
+  /** 附件数量上限 */
+  attachmentNumberLimit: number
+  /** 1=当前类型不可用 */
+  disableTime: number
+  /** 单次最长可请假天数（0=不限） */
+  limitDay: number
+}
+
+/** 请假执行参数 */
+export interface ExecuteLeaveApplyParams {
+  leaveType: number
+  startTime: string
+  endTime: string
+  leaveReason: string
+  outStatus: boolean
+  urgencyMobile?: string
+  address?: string
+  detailAddress?: string
+  longitude: string
+  latitude: string
+  locationAddr: string
+  /** 附件图片 URL 列表（最多 4 张且不超学校上限；后端兼容旧 imageUrl 单图字段） */
+  imageUrls?: string[]
+  approverWid?: string
+  approverId?: string
+  approverName?: string
+  /** 抄送人（非必填；候选取自审批人列表） */
+  ccUsers?: LeaveApprover[]
+}
+
+// ======== API ========
+
+/** 获取今日校园待销假列表（实时请求，附带规定销假位置与开关） */
+export function getPendingLeaves() {
+  return api.get<{ data: LeaveItem[] }>('/leave/pending-list')
+}
+
+/** 获取销假可选审批人（reportApplyFlow=true 的请假类型使用） */
+export function getLeaveApprovers(leaveId: string) {
+  return api.post<{ data: LeaveApprover[] }>('/leave/approvers', { leaveId })
+}
+
+/** 获取请假类型列表（含权威开关：needApproval/enableAttach/reasonWordLimit 等） */
+export function getLeaveTypes() {
+  return api.get<{ data: LeaveType[] }>('/leave/types')
+}
+
+/** 获取请假可选审批人（needApproval=1 的类型，需先选类型与起止时间） */
+export function getApplyApprovers(params: { leaveType: number; startTime: string; endTime: string }) {
+  return api.post<{ data: LeaveApprover[] }>('/leave/apply-approvers', params)
+}
+
+/**
+ * 执行请假申请（POST + SSE 流式事件，与销假执行体验一致）。
+ * 事件流：connecting → submitting → success / task_error
+ */
+export function executeLeaveApplySSE(params: ExecuteLeaveApplyParams, callbacks: {
+  onConnecting?: () => void
+  onSubmitting?: () => void
+  onSuccess?: (data: any) => void
+  onError?: (message: string, data?: any) => void
+}): AbortController {
+  return leaveSSE('/leave/apply', params, callbacks)
+}
+
+/** 获取销假日志列表 */
+export function getLeaveLogs() {
+  return api.get<{ data: LeaveLog[] }>('/leave/logs')
+}
+
+/** 删除销假日志 */
+export function deleteLeaveLog(id: number) {
+  return api.delete(`/leave/logs/${id}`)
+}
+
+/**
+ * 执行销假（POST + SSE 流式事件，与打卡执行体验一致）。
+ * 事件流：connecting → fetching_detail → submitting → success / task_error
+ * 返回 AbortController，可用于中断（如关闭弹窗时）。
+ */
+export function executeLeaveSSE(params: ExecuteLeaveParams, callbacks: {
+  onConnecting?: () => void
+  onFetchingDetail?: () => void
+  onSubmitting?: () => void
+  onSuccess?: (data: any) => void
+  onError?: (message: string, data?: any) => void
+}): AbortController {
+  return leaveSSE('/leave/execute', params, callbacks)
+}
+
+/**
+ * 请假/销假共用的 SSE 执行封装。
+ * 事件流：connecting → (fetching_detail) → submitting → success / task_error
+ */
+function leaveSSE(path: string, params: object, callbacks: {
+  onConnecting?: () => void
+  onFetchingDetail?: () => void
+  onSubmitting?: () => void
+  onSuccess?: (data: any) => void
+  onError?: (message: string, data?: any) => void
+}): AbortController {
+  const controller = new AbortController()
+
+  ;(async () => {
+    let finished = false
+    const finish = (fn?: (...args: any[]) => void, ...args: any[]) => {
+      if (finished) return
+      finished = true
+      fn?.(...args)
+    }
+    try {
+      const baseUrl = import.meta.env.VITE_API_BASE_URL || '/api'
+      const token = localStorage.getItem('access_token') || ''
+      const res = await fetch(`${baseUrl}${path}`, {
+        method: 'POST',
+        headers: {
+          'Authorization': 'Bearer ' + token,
+          'Content-Type': 'application/json',
+        },
+        body: JSON.stringify(params),
+        signal: controller.signal,
+      })
+
+      // HTTP 错误：服务端以 JSON 返回（参数校验/鉴权等，非 SSE 阶段）
+      if (!res.ok || !res.body) {
+        let msg = '连接失败，请检查网络'
+        try {
+          const j = await res.json()
+          if (j?.message) msg = j.message
+        } catch { /* 保留默认提示 */ }
+        finish(callbacks.onError, msg, { message: msg })
+        return
+      }
+
+      const reader = res.body.getReader()
+      const decoder = new TextDecoder()
+      let buf = ''
+      for (;;) {
+        const { value, done } = await reader.read()
+        if (done) break
+        buf += decoder.decode(value, { stream: true })
+
+        // 按空行切分 SSE 事件块（event: xxx\ndata: xxx\n\n）
+        let sep: number
+        while ((sep = buf.indexOf('\n\n')) >= 0) {
+          const chunk = buf.slice(0, sep)
+          buf = buf.slice(sep + 2)
+
+          let event = 'message'
+          const dataLines: string[] = []
+          for (const line of chunk.split('\n')) {
+            if (line.startsWith('event:')) {
+              event = line.slice(6).trim()
+            } else if (line.startsWith('data:')) {
+              dataLines.push(line.slice(5).trim())
+            }
+          }
+          let data: any = {}
+          const dataRaw = dataLines.join('\n')
+          try { data = dataRaw ? JSON.parse(dataRaw) : {} } catch { /* 容忍非 JSON data */ }
+
+          switch (event) {
+            case 'connecting':
+              callbacks.onConnecting?.()
+              break
+            case 'fetching_detail':
+              callbacks.onFetchingDetail?.()
+              break
+            case 'submitting':
+              callbacks.onSubmitting?.()
+              break
+            case 'success':
+              finish(callbacks.onSuccess, data)
+              break
+            case 'task_error':
+              finish(callbacks.onError, data?.message || '执行失败', data)
+              break
+          }
+          if (finished) break
+        }
+        if (finished) break
+      }
+
+      // 流结束但未收到任何结果事件：视为异常中断
+      finish(callbacks.onError, '连接中断，请重试')
+    } catch (e: any) {
+      if (e?.name === 'AbortError') return // 主动取消，不回调
+      finish(callbacks.onError, e?.message || '连接失败，请检查网络')
+    }
+  })()
+
+  return controller
+}

frondend/src/components/GuideOverlay.vue

@@ -68,7 +68,7 @@ const steps: GuideStep[] = [
     tab: 'home',
     title: '新建每日签到任务',
     targets: ['[data-guide="home-create-task"]'],
-    descByKind: () => '点击蓝色的「＋ 新的签到任务」按钮，选择任务名称（如 晚签到），然后填好对应签到信息并保存，任务就创建好了。',
+    descByKind: () => '点击蓝色的「＋ 新的打卡任务」按钮，选择任务名称（如 晚签到），然后填好对应签到信息并保存，任务就创建好了。',
   },
   {
     tab: 'home',

frondend/src/components/UpdateChecker.vue

@@ -0,0 +1,146 @@
+<script setup lang="ts">
+// 版本更新检测：定时拉取首页 index.html，比对 JS/CSS 资源文件名。
+// 后端每次发布都会重新打包，文件名带内容 hash；资源名变化即说明有新版本，
+// 弹窗提示用户刷新（确认后立即 reload，拿到新 index.html 与新资源）。
+import { onMounted, onUnmounted, ref } from 'vue'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
+
+const CHECK_INTERVAL = 5 * 60 * 1000 // 5 分钟
+const FIRST_DELAY = 30 * 1000 // 启动 30 秒后首次检查（避免与首屏请求抢占）
+const DISMISS_KEY = 'xz_update_dismissed_version'
+
+const showUpdate = ref(false)
+// 当前页面加载时使用的资源名集合（相对路径）
+const currentAssets = new Set<string>()
+let timer: ReturnType<typeof setTimeout> | null = null
+let stopped = false
+let prompting = false
+let pendingVersion = ''
+
+/** 从 HTML 文本中提取 /assets/ 下的 js/css 资源名 */
+function extractAssets(html: string): Set<string> {
+  const out = new Set<string>()
+  const re = /\/assets\/[A-Za-z0-9_.-]+\.(?:js|css)/g
+  let m: RegExpExecArray | null
+  while ((m = re.exec(html)) !== null) {
+    out.add(m[0])
+  }
+  return out
+}
+
+/** 读取当前页面已加载的资源名（由 script/link 标签推导，等同当前构建版本） */
+function collectCurrentAssets(): Set<string> {
+  const out = new Set<string>()
+  document.querySelectorAll<HTMLScriptElement>('script[src]').forEach((el) => {
+    const m = el.src.match(/\/assets\/[A-Za-z0-9_.-]+\.(?:js|css)/)
+    if (m) out.add(m[0])
+  })
+  document.querySelectorAll<HTMLLinkElement>('link[href]').forEach((el) => {
+    const m = el.href.match(/\/assets\/[A-Za-z0-9_.-]+\.(?:js|css)/)
+    if (m) out.add(m[0])
+  })
+  return out
+}
+
+async function checkUpdate() {
+  if (stopped || prompting) return
+  try {
+    // 版本探测必须绕过 HTTP 缓存（后端 index.html 有 1 小时 MaxAge），故带时间戳参数
+    const res = await fetch(`/?_v=${Date.now()}`, {
+      cache: 'no-store',
+      headers: { 'Cache-Control': 'no-cache', Pragma: 'no-cache' },
+    })
+    if (!res.ok) return
+    const html = await res.text()
+    const latest = extractAssets(html)
+    if (latest.size === 0 || currentAssets.size === 0) return
+
+    // 任一新资源名未在当前页面出现 → 有新版本
+    const hasNew = [...latest].some((a) => !currentAssets.has(a))
+    if (!hasNew) return
+
+    const newVersion = [...latest].join(',')
+    if (sessionStorage.getItem(DISMISS_KEY) === newVersion) return // 本会话已提示过
+
+    pendingVersion = newVersion
+    prompting = true
+    showUpdate.value = true
+  } catch {
+    // 网络异常静默跳过，等待下一轮
+  } finally {
+    prompting = false
+  }
+}
+
+function schedule(delay: number) {
+  if (stopped) return
+  timer = setTimeout(async () => {
+    await checkUpdate()
+    schedule(CHECK_INTERVAL)
+  }, delay)
+}
+
+/** 用户确认刷新：立即重载（拿新版本资源） */
+function reloadNow() {
+  showUpdate.value = false
+  location.reload()
+}
+
+/** 用户选择稍后：记录本次版本，本会话内不再重复提示 */
+function dismiss() {
+  showUpdate.value = false
+  if (pendingVersion) sessionStorage.setItem(DISMISS_KEY, pendingVersion)
+}
+
+/** 弹窗关闭统一入口（按钮 / 点遮罩 / Esc 都走这里），关闭即视为「稍后」 */
+function onDialogOpenChange(value: boolean) {
+  if (value) {
+    showUpdate.value = true
+    return
+  }
+  dismiss()
+}
+
+onMounted(() => {
+  currentAssets.clear()
+  collectCurrentAssets().forEach((a) => currentAssets.add(a))
+  schedule(FIRST_DELAY)
+})
+
+onUnmounted(() => {
+  stopped = true
+  if (timer) clearTimeout(timer)
+})
+</script>
+
+<template>
+  <!-- 新版本提示弹窗：标题 + 说明 + 稍后/立即刷新 -->
+  <AppDialog
+    :open="showUpdate"
+    variant="center"
+    z-class="z-[200]"
+    panel-class="w-[86%] max-w-[340px] p-5"
+    title="发现新版本"
+    description="网站已更新，刷新后即可使用最新功能，是否立即刷新？"
+    @update:open="onDialogOpenChange"
+  >
+    <h3 class="text-base font-semibold text-gray-900 mb-2">发现新版本</h3>
+    <p class="text-sm text-gray-500 leading-relaxed mb-5">
+      网站已更新，刷新后即可使用最新功能，是否立即刷新？
+    </p>
+    <div class="flex gap-2">
+      <button
+        class="flex-1 py-2.5 rounded-lg border border-gray-200 text-sm text-gray-600 active:bg-gray-50"
+        @click="dismiss"
+      >
+        稍后
+      </button>
+      <button
+        class="flex-1 py-2.5 rounded-lg bg-blue-600 text-white text-sm font-medium active:bg-blue-700"
+        @click="reloadNow"
+      >
+        立即刷新
+      </button>
+    </div>
+  </AppDialog>
+</template>

frondend/src/components/ui/dialog/AppDialog.vue

@@ -0,0 +1,187 @@
+<script setup lang="ts">
+// AppDialog —— 全站统一弹窗封装（reka-ui Dialog 底座）。
+//
+// 目的：用 Dialog 原语换取焦点捕获、Esc 关闭、body 滚动锁定、aria 语义与 Portal 渲染，
+// 同时保持与现有手写弹窗一致的视觉（白色卡片 + 圆角 + 遮罩）。
+//
+// 结构说明（与 reka 的约定）：
+//   - DialogContent（DismissableLayer）本身不带定位样式，只作为焦点/事件容器；
+//   - 真正的「铺满全屏的定位层」是它内部的 div：pointer-events:none 让点击穿透到底下的
+//     DialogOverlay，从而「点遮罩关闭」才能成立（点在自己身上不算 outside，不会关闭）；
+//   - 面板单独 pointer-events:auto，恢复可交互。
+//   这与项目里 MobileLayout 手写弹窗的 pointer-events 处理方式一致。
+//
+// 面板基础样式（w-full / bg-white / flex flex-col / overflow-hidden / max-h-[85vh] / shadow-xl）
+// 与原手写弹窗一致；**原弹窗没有阴影时**必须在 panelClass 里显式传 shadow-none
+// （经 tailwind-merge 覆盖，实测 cn('shadow-xl','shadow-none') → 'shadow-none'），
+// 否则会凭空多出阴影（LeaveView 等页面的面板原本无阴影）。
+//
+// 形态（variant）：
+//   - sheet（默认）：移动端贴底、桌面端居中（≈原 items-end sm:items-center），
+//     面板默认 rounded-t-2xl sm:rounded-2xl，调用方在 panelClass 里给 sm:max-w-sm；
+//   - center：始终居中（≈原 items-center），调用方在 panelClass 里给宽度与内边距。
+//
+// 典型用法：
+//   <AppDialog v-model:open="show" variant="center" z-class="z-[200]"
+//              panel-class="w-[86%] max-w-[340px] p-5" title="发现新版本" :description="desc">
+//     <!-- 面板内容（视觉标题由业务自己渲染，组件内的 Title/Description 仅供读屏） -->
+//   </AppDialog>
+//
+// 关闭控制：dismissable=false 时拦截遮罩点击与 Esc（对应「执行中不允许关闭」）；
+// 关闭动作统一经 update:open 冒泡，调用方按需守卫。
+import {
+  DialogRoot,
+  DialogPortal,
+  DialogOverlay,
+  DialogContent,
+  DialogTitle,
+  DialogDescription,
+} from 'reka-ui'
+import type { FocusOutsideEvent, PointerDownOutsideEvent } from 'reka-ui'
+import { cn } from '@/lib/utils'
+
+const props = withDefaults(
+  defineProps<{
+    open: boolean
+    /** sheet=移动端贴底/桌面居中；center=始终居中 */
+    variant?: 'sheet' | 'center'
+    /** 层级类（遮罩与定位层同层，如 z-[60]） */
+    zClass?: string
+    /** 遮罩浓度类（默认 bg-black/40，部分弹窗用 /50） */
+    overlayClass?: string
+    /**
+     * 淡入淡出（默认关）。
+     * 注意：reka-ui 的 Presence 只识别 CSS animation（读 computed animation-name），
+     * **不识别 Vue <Transition> 的 class 过渡**，且 DialogContent 根是 fragment
+     * 无法被 <Transition> 包裹。故原手写弹窗的 `<Transition name="fade">`（0.2s 透明度）
+     * 需由本组件的 CSS animation 承接（见文件末尾 style）。
+     */
+    fade?: boolean
+    /** 定位层附加类（如 px-6 给居中弹窗留边距） */
+    wrapperClass?: string
+    /** 面板附加类（宽度/内边距/圆角等，经 tailwind-merge 合并） */
+    panelClass?: string
+    /** false 时禁止点遮罩与 Esc 关闭（执行中场景） */
+    dismissable?: boolean
+    /** 读屏标题；视觉标题由业务在默认插槽自渲染 */
+    title?: string
+    /** 读屏描述（缺省回退为标题，避免 aria-describedby 指向不存在的节点） */
+    description?: string
+  }>(),
+  {
+    variant: 'sheet',
+    zClass: 'z-50',
+    overlayClass: 'bg-black/40',
+    wrapperClass: '',
+    panelClass: '',
+    dismissable: true,
+    fade: false,
+    title: '提示',
+    description: '',
+  },
+)
+
+const emit = defineEmits<{
+  (e: 'update:open', value: boolean): void
+}>()
+
+function onOpenChange(value: boolean) {
+  emit('update:open', value)
+}
+
+// reka 以 CustomEvent 派发，preventDefault 即阻止 dismiss（见 DismissableLayer 实现）
+function onInteractOutside(e: PointerDownOutsideEvent | FocusOutsideEvent) {
+  if (!props.dismissable) e.preventDefault()
+}
+
+function onEscapeKeyDown(e: KeyboardEvent) {
+  if (!props.dismissable) e.preventDefault()
+}
+</script>
+
+<template>
+  <DialogRoot :open="props.open" @update:open="onOpenChange">
+    <DialogPortal>
+      <!-- 遮罩：reka 会自动加 pointer-events:auto 并响应「点遮罩关闭」 -->
+      <DialogOverlay
+        :class="cn('fixed inset-0', props.overlayClass, props.zClass, props.fade && 'app-dialog-fade')"
+      />
+
+      <!-- 事件/焦点容器：本身不承载布局（零尺寸），只作为焦点/事件容器。
+           fade 类必须挂在这里：它会 forward 到 role="dialog" 那个根节点，也就是
+           Presence 追踪的节点；Presence 靠监听该节点自身的 animationend 判断离场
+           结束，动画挂到子节点上则读不到，会直接卸载（瞬间消失）。
+           fade 时额外加 relative + 同层 z：淡入淡出的 opacity<1 会让本节点形成
+           z-index:0 的层叠上下文，届时内部 fixed 面板被困其中，而 overlay（正 z）
+           会在其后绘制、把面板盖住 0.2s 再突然跳回；加上定位与 zClass 后本节点
+           与 overlay 同级且 DOM 在后 → 始终在上。不加 fade 时保持原样（零改动）。 -->
+      <DialogContent
+        :class="cn('outline-none', props.fade && ['relative', props.zClass, 'app-dialog-fade'])"
+        @interact-outside="onInteractOutside"
+        @escape-key-down="onEscapeKeyDown"
+      >
+        <!-- 定位层：铺满全屏但点击穿透（点空白处落到遮罩上才能关闭） -->
+        <div
+          :class="
+            cn(
+              'fixed inset-0 flex justify-center',
+              props.variant === 'sheet' ? 'items-end sm:items-center' : 'items-center',
+              props.wrapperClass,
+              props.zClass,
+            )
+          "
+          style="pointer-events: none"
+        >
+          <!-- 面板：视觉与手写弹窗一致；pointer-events 恢复以便交互 -->
+          <div
+            :class="
+              cn(
+                'relative w-full bg-white flex flex-col overflow-hidden shadow-xl max-h-[85vh]',
+                props.variant === 'sheet' ? 'rounded-t-2xl sm:rounded-2xl' : 'rounded-2xl',
+                props.panelClass,
+              )
+            "
+            style="pointer-events: auto"
+          >
+            <!-- 读屏标题/描述（视觉标题由业务自渲染，这里不重复显示） -->
+            <DialogTitle class="sr-only">{{ props.title }}</DialogTitle>
+            <DialogDescription class="sr-only">{{ props.description || props.title }}</DialogDescription>
+            <slot />
+          </div>
+        </div>
+      </DialogContent>
+    </DialogPortal>
+  </DialogRoot>
+</template>
+
+<style>
+/* 淡入淡出（fade=true 时启用）。
+ *
+ * 为什么不用 <Transition>：reka-ui 的 Presence 通过读取 computed style 的
+ * animation-name 判断「是否正在动画」，只认 CSS animation；Vue 的 <Transition>
+ * 是 class 过渡，Presence 感知不到，会导致离场动画被直接跳过（瞬间消失）。
+ * 因此这里用 CSS animation + reka 输出的 data-state="open|closed" 实现进出场。
+ * 非 scoped：内容经 DialogPortal 传送到 body，且需同时作用于 overlay 与 content。 */
+.app-dialog-fade[data-state='open'] {
+  animation: app-dialog-fade-in 0.2s ease;
+}
+.app-dialog-fade[data-state='closed'] {
+  animation: app-dialog-fade-out 0.2s ease;
+}
+@keyframes app-dialog-fade-in {
+  from {
+    opacity: 0;
+  }
+  to {
+    opacity: 1;
+  }
+}
+@keyframes app-dialog-fade-out {
+  from {
+    opacity: 1;
+  }
+  to {
+    opacity: 0;
+  }
+}
+</style>

frondend/src/composables/useMessage.ts

@@ -30,6 +30,7 @@ export function useMessage() {
     success: (msg: string) => addToast('success', msg),
     error: (msg: string) => addToast('error', msg),
     info: (msg: string) => addToast('info', msg),
+    warning: (msg: string) => addToast('info', msg),
     removeToast,
   }
 }

frondend/src/layouts/MobileLayout.vue

@@ -4,6 +4,7 @@ import { useRouter, useRoute } from 'vue-router'
 import { CalendarCheck2, CalendarX2, User, Bell, X, CheckCircle, ChevronDown, MessageSquare, Sparkles } from 'lucide-vue-next'
 import { useMessage } from '@/composables/useMessage'
 import { Button } from '@/components/ui/button'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import GuideOverlay from '@/components/GuideOverlay.vue'
 import * as authApi from '@/api/auth'
 import * as announceApi from '@/api/announcement'
@@ -20,7 +21,7 @@ const avatarFailed = ref(false)
 
 const tabs = [
   { name: 'home', label: '打卡', icon: CalendarCheck2 },
-  { name: 'leave', label: '销假', icon: CalendarX2 },
+  { name: 'leave', label: '请/销假', icon: CalendarX2 },
   { name: 'profile', label: '个人中心', icon: User },
 ]
 
@@ -252,8 +253,8 @@ onUnmounted(() => {
 
 <template>
   <div class="flex flex-col h-full">
-    <!-- 顶部用户信息栏（仅在首页显示） -->
-    <div v-if="activeTab === 'home'" class="flex-shrink-0 bg-gradient-to-r from-blue-500 to-blue-600 text-white px-4 pt-3 pb-3">
+    <!-- 顶部用户信息栏（首页与请/销假页显示，两页保持一致） -->
+    <div v-if="activeTab === 'home' || activeTab === 'leave'" class="flex-shrink-0 bg-gradient-to-r from-blue-500 to-blue-600 text-white px-4 pt-3 pb-3">
       <div v-if="userInfo" class="flex items-center gap-3">
         <div class="w-10 h-10 rounded-full bg-white/20 flex items-center justify-center flex-shrink-0 overflow-hidden">
           <img v-show="userInfo.avatar && !avatarFailed" :src="userInfo.avatar" class="w-full h-full object-cover" @error="avatarFailed = true" />
@@ -263,7 +264,7 @@ onUnmounted(() => {
           <p class="font-semibold text-sm truncate">{{ userInfo.realName || userInfo.username }}</p>
           <p class="text-xs text-white/70 truncate">{{ userInfo.schoolName }}</p>
         </div>
-        <!-- 公告铃铛（仅首页显示） -->
+        <!-- 公告铃铛（首页与请/销假页均显示） -->
         <button class="relative w-9 h-9 rounded-full bg-white/15 flex items-center justify-center hover:bg-white/25 transition-colors flex-shrink-0" @click="openAnnouncementPanel">
           <Bell class="w-5 h-5 text-white" />
           <span v-if="totalUnread > 0" class="absolute -top-0.5 -right-0.5 min-w-[16px] h-4 px-1 rounded-full bg-red-500 text-white text-[9px] font-bold flex items-center justify-center leading-none">{{ totalUnread > 99 ? '99+' : totalUnread }}</span>
@@ -297,193 +298,187 @@ onUnmounted(() => {
       </button>
     </div>
 
-    <!-- ======== 公告面板遮罩 ======== -->
-    <transition name="fade">
-      <div v-if="showAnnPanel" class="fixed inset-0 z-50 bg-black/50" @click="showAnnPanel = false" />
-    </transition>
+    <!-- ======== 公告面板（遮罩 + 底部面板） ======== -->
+    <AppDialog
+      :open="showAnnPanel"
+      overlay-class="bg-black/50"
+      panel-class="sm:max-w-sm max-h-[80vh] shadow-2xl"
+      :fade="true"
+      title="通知"
+      @update:open="(v: boolean) => { if (!v) showAnnPanel = false }"
+    >
+      <!-- 拖拽指示条 -->
+      <div class="flex justify-center pt-2.5 pb-1 flex-shrink-0">
+        <div class="w-9 h-1 rounded-full bg-gray-300" />
+      </div>
 
-    <!-- ======== 公告底部面板 ======== -->
-    <transition name="slide-up">
-      <div
-        v-if="showAnnPanel"
-        class="fixed inset-0 z-50 flex items-end sm:items-center justify-center pointer-events-none"
-      >
-        <div class="absolute inset-0 pointer-events-auto" @click="showAnnPanel = false" />
-        <div class="relative w-full sm:max-w-sm max-h-[80vh] bg-white sm:rounded-2xl rounded-t-2xl shadow-2xl flex flex-col overflow-hidden pointer-events-auto">
-          <!-- 拖拽指示条 -->
-          <div class="flex justify-center pt-2.5 pb-1 flex-shrink-0">
-            <div class="w-9 h-1 rounded-full bg-gray-300" />
+      <!-- 标题栏 -->
+      <div class="flex items-center justify-between px-5 py-2 flex-shrink-0">
+        <div class="flex items-center gap-2">
+          <div class="w-7 h-7 rounded-lg bg-blue-100 flex items-center justify-center">
+            <Bell class="w-4 h-4 text-blue-500" />
           </div>
+          <span class="font-semibold text-gray-900 text-sm">通知</span>
+          <span v-if="totalUnread > 0" class="text-[10px] px-2 py-0.5 rounded-full bg-red-50 text-red-500 font-medium border border-red-100">{{ totalUnread }} 条未读</span>
+        </div>
+        <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center transition-colors" @click="showAnnPanel = false">
+          <X class="w-4 h-4 text-gray-400" />
+        </button>
+      </div>
 
-          <!-- 标题栏 -->
-          <div class="flex items-center justify-between px-5 py-2 flex-shrink-0">
-            <div class="flex items-center gap-2">
-              <div class="w-7 h-7 rounded-lg bg-blue-100 flex items-center justify-center">
-                <Bell class="w-4 h-4 text-blue-500" />
+      <!-- 分隔线 -->
+      <div class="mx-5 border-t border-gray-100 flex-shrink-0" />
+
+      <!-- 通知列表 -->
+      <div class="flex-1 overflow-y-auto px-5 py-2">
+        <!-- ===== 公告分区 ===== -->
+        <div v-if="announcements.length > 0" class="mb-1">
+          <p class="text-[10px] font-medium text-gray-400 uppercase tracking-wider mb-2 mt-1">公告</p>
+          <div class="space-y-2">
+            <div
+              v-for="item in announcements"
+              :key="'ann-'+item.id"
+              class="rounded-xl p-3.5 transition-all duration-200 cursor-pointer border"
+              :class="item.isRead
+                ? 'bg-white border-gray-100 hover:border-gray-200'
+                : 'bg-blue-50/50 border-blue-100 hover:border-blue-200'"
+              @click="openDetail(item)"
+            >
+              <div class="flex items-start gap-3">
+                <div class="mt-0.5 flex-shrink-0">
+                  <div v-if="!item.isRead" class="w-2.5 h-2.5 rounded-full bg-blue-500 mt-1.5" />
+                  <CheckCircle v-else class="w-4 h-4 text-green-400 mt-0.5" />
+                </div>
+                <div class="flex-1 min-w-0">
+                  <div class="flex items-center gap-1.5 mb-1">
+                    <p class="text-sm font-medium text-gray-900 truncate">{{ item.title }}</p>
+                  </div>
+                  <p class="text-xs text-gray-500 leading-relaxed line-clamp-1">{{ item.content }}</p>
+                  <p class="text-[10px] text-gray-400 mt-1">{{ new Date(item.createdAt).toLocaleString('zh-CN') }}</p>
+                </div>
+                <ChevronDown class="w-4 h-4 text-gray-300 flex-shrink-0 mt-1 -rotate-90" />
               </div>
-              <span class="font-semibold text-gray-900 text-sm">通知</span>
-              <span v-if="totalUnread > 0" class="text-[10px] px-2 py-0.5 rounded-full bg-red-50 text-red-500 font-medium border border-red-100">{{ totalUnread }} 条未读</span>
             </div>
-            <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center transition-colors" @click="showAnnPanel = false">
-              <X class="w-4 h-4 text-gray-400" />
-            </button>
           </div>
+        </div>
 
-          <!-- 分隔线 -->
-          <div class="mx-5 border-t border-gray-100 flex-shrink-0" />
-
-          <!-- 通知列表 -->
-          <div class="flex-1 overflow-y-auto px-5 py-2">
-            <!-- ===== 公告分区 ===== -->
-            <div v-if="announcements.length > 0" class="mb-1">
-              <p class="text-[10px] font-medium text-gray-400 uppercase tracking-wider mb-2 mt-1">公告</p>
-              <div class="space-y-2">
-                <div
-                  v-for="item in announcements"
-                  :key="'ann-'+item.id"
-                  class="rounded-xl p-3.5 transition-all duration-200 cursor-pointer border"
-                  :class="item.isRead
-                    ? 'bg-white border-gray-100 hover:border-gray-200'
-                    : 'bg-blue-50/50 border-blue-100 hover:border-blue-200'"
-                  @click="openDetail(item)"
-                >
-                  <div class="flex items-start gap-3">
-                    <div class="mt-0.5 flex-shrink-0">
-                      <div v-if="!item.isRead" class="w-2.5 h-2.5 rounded-full bg-blue-500 mt-1.5" />
-                      <CheckCircle v-else class="w-4 h-4 text-green-400 mt-0.5" />
-                    </div>
-                    <div class="flex-1 min-w-0">
-                      <div class="flex items-center gap-1.5 mb-1">
-                        <p class="text-sm font-medium text-gray-900 truncate">{{ item.title }}</p>
-                      </div>
-                      <p class="text-xs text-gray-500 leading-relaxed line-clamp-1">{{ item.content }}</p>
-                      <p class="text-[10px] text-gray-400 mt-1">{{ new Date(item.createdAt).toLocaleString('zh-CN') }}</p>
-                    </div>
-                    <ChevronDown class="w-4 h-4 text-gray-300 flex-shrink-0 mt-1 -rotate-90" />
-                  </div>
+        <!-- ===== 工单通知分区 ===== -->
+        <div v-if="ticketNotifications.length > 0" class="mb-1">
+          <div v-if="announcements.length > 0" class="border-t border-gray-100 my-3" />
+          <p class="text-[10px] font-medium text-gray-400 uppercase tracking-wider mb-2">工单通知</p>
+          <div class="space-y-2">
+            <div
+              v-for="n in ticketNotifications"
+              :key="'tkt-'+n.id"
+              class="rounded-xl p-3.5 transition-all duration-200 cursor-pointer border"
+              :class="n.isRead
+                ? 'bg-white border-gray-100 hover:border-gray-200'
+                : 'bg-rose-50/50 border-rose-100 hover:border-rose-200'"
+              @click="handleTicketNotifClick(n)"
+            >
+              <div class="flex items-start gap-3">
+                <div class="mt-0.5 flex-shrink-0">
+                  <div v-if="!n.isRead" class="w-2.5 h-2.5 rounded-full bg-rose-500 mt-1.5" />
+                  <CheckCircle v-else class="w-4 h-4 text-green-400 mt-0.5" />
                 </div>
-              </div>
-            </div>
-
-            <!-- ===== 工单通知分区 ===== -->
-            <div v-if="ticketNotifications.length > 0" class="mb-1">
-              <div v-if="announcements.length > 0" class="border-t border-gray-100 my-3" />
-              <p class="text-[10px] font-medium text-gray-400 uppercase tracking-wider mb-2">工单通知</p>
-              <div class="space-y-2">
-                <div
-                  v-for="n in ticketNotifications"
-                  :key="'tkt-'+n.id"
-                  class="rounded-xl p-3.5 transition-all duration-200 cursor-pointer border"
-                  :class="n.isRead
-                    ? 'bg-white border-gray-100 hover:border-gray-200'
-                    : 'bg-rose-50/50 border-rose-100 hover:border-rose-200'"
-                  @click="handleTicketNotifClick(n)"
-                >
-                  <div class="flex items-start gap-3">
-                    <div class="mt-0.5 flex-shrink-0">
-                      <div v-if="!n.isRead" class="w-2.5 h-2.5 rounded-full bg-rose-500 mt-1.5" />
-                      <CheckCircle v-else class="w-4 h-4 text-green-400 mt-0.5" />
-                    </div>
-                    <div class="flex-1 min-w-0">
-                      <div class="flex items-center gap-1.5 mb-1">
-                        <MessageSquare class="w-3.5 h-3.5 text-rose-500 flex-shrink-0" />
-                        <p class="text-sm font-medium text-gray-900 truncate">{{ n.title }}</p>
-                      </div>
-                      <p class="text-xs text-gray-500 leading-relaxed line-clamp-1">{{ n.content }}</p>
-                      <p class="text-[10px] text-gray-400 mt-1">{{ n.createdAt }}</p>
-                    </div>
-                    <ChevronDown class="w-4 h-4 text-gray-300 flex-shrink-0 mt-1 -rotate-90" />
+                <div class="flex-1 min-w-0">
+                  <div class="flex items-center gap-1.5 mb-1">
+                    <MessageSquare class="w-3.5 h-3.5 text-rose-500 flex-shrink-0" />
+                    <p class="text-sm font-medium text-gray-900 truncate">{{ n.title }}</p>
                   </div>
+                  <p class="text-xs text-gray-500 leading-relaxed line-clamp-1">{{ n.content }}</p>
+                  <p class="text-[10px] text-gray-400 mt-1">{{ n.createdAt }}</p>
                 </div>
+                <ChevronDown class="w-4 h-4 text-gray-300 flex-shrink-0 mt-1 -rotate-90" />
               </div>
             </div>
+          </div>
+        </div>
 
-            <!-- 空状态 -->
-            <div v-if="announcements.length === 0 && ticketNotifications.length === 0 && !loadingAnnouncements && !loadingTickets" class="flex flex-col items-center justify-center py-16 text-gray-400">
-              <Bell class="w-10 h-10 mb-3 opacity-30" />
-              <p class="text-sm font-medium">暂无通知</p>
-              <p class="text-xs mt-1">还没有收到任何公告或工单通知</p>
-            </div>
+        <!-- 空状态 -->
+        <div v-if="announcements.length === 0 && ticketNotifications.length === 0 && !loadingAnnouncements && !loadingTickets" class="flex flex-col items-center justify-center py-16 text-gray-400">
+          <Bell class="w-10 h-10 mb-3 opacity-30" />
+          <p class="text-sm font-medium">暂无通知</p>
+          <p class="text-xs mt-1">还没有收到任何公告或工单通知</p>
+        </div>
 
-            <!-- 加载中 -->
-            <div v-if="loadingAnnouncements || loadingTickets" class="space-y-3 py-4">
-              <div v-for="i in 3" :key="i" class="animate-pulse">
-                <div class="h-4 w-32 bg-gray-100 rounded mb-2" />
-                <div class="h-3 w-full bg-gray-100 rounded mb-1" />
-                <div class="h-3 w-3/4 bg-gray-100 rounded" />
-              </div>
-            </div>
+        <!-- 加载中 -->
+        <div v-if="loadingAnnouncements || loadingTickets" class="space-y-3 py-4">
+          <div v-for="i in 3" :key="i" class="animate-pulse">
+            <div class="h-4 w-32 bg-gray-100 rounded mb-2" />
+            <div class="h-3 w-full bg-gray-100 rounded mb-1" />
+            <div class="h-3 w-3/4 bg-gray-100 rounded" />
           </div>
         </div>
       </div>
-    </transition>
+    </AppDialog>
 
     <!-- ======== 公告详情 Dialog ======== -->
-    <Teleport to="body">
-      <transition name="fade">
-        <div
-          v-if="showDetail && detailItem"
-          class="fixed inset-0 z-[60] flex items-center justify-center px-6"
-        >
-          <div class="absolute inset-0 bg-black/50" @click="showDetail = false" />
-          <div class="relative w-full max-w-sm bg-white rounded-2xl shadow-2xl overflow-hidden">
-            <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
-            <div class="p-6">
-              <div class="flex items-center justify-between mb-3">
-                <div class="flex items-center gap-2.5">
-                  <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
-                    <Bell class="w-5 h-5 text-blue-500" />
-                  </div>
-                  <h3 class="text-base font-bold text-gray-900">{{ detailItem.title }}</h3>
-                </div>
-                <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center flex-shrink-0" @click="showDetail = false">
-                  <X class="w-4 h-4 text-gray-400" />
-                </button>
-              </div>
-              <div class="flex items-center gap-2 mb-4">
-                <span class="text-[10px] text-gray-400">{{ new Date(detailItem.createdAt).toLocaleString('zh-CN') }}</span>
-              </div>
-              <div class="bg-gray-50 rounded-xl p-4 max-h-[50vh] overflow-y-auto">
-                <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ detailItem.content }}</p>
-              </div>
-              <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showDetail = false">
-                关闭
-              </Button>
+    <AppDialog
+      :open="showDetail && !!detailItem"
+      variant="center"
+      z-class="z-[60]"
+      overlay-class="bg-black/50"
+      wrapper-class="px-6"
+      panel-class="max-w-sm shadow-2xl"
+      :fade="true"
+      :title="detailItem?.title || '公告详情'"
+      @update:open="(v: boolean) => { if (!v) showDetail = false }"
+    >
+      <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
+      <div class="p-6">
+        <div class="flex items-center justify-between mb-3">
+          <div class="flex items-center gap-2.5">
+            <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
+              <Bell class="w-5 h-5 text-blue-500" />
             </div>
+            <h3 class="text-base font-bold text-gray-900">{{ detailItem?.title }}</h3>
           </div>
+          <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center flex-shrink-0" @click="showDetail = false">
+            <X class="w-4 h-4 text-gray-400" />
+          </button>
         </div>
-      </transition>
-    </Teleport>
+        <div class="flex items-center gap-2 mb-4">
+          <span class="text-[10px] text-gray-400">{{ detailItem ? new Date(detailItem.createdAt).toLocaleString('zh-CN') : '' }}</span>
+        </div>
+        <div class="bg-gray-50 rounded-xl p-4 max-h-[50vh] overflow-y-auto">
+          <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ detailItem?.content }}</p>
+        </div>
+        <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showDetail = false">
+          关闭
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- ======== 强制弹出公告 Dialog ======== -->
-    <Teleport to="body">
-      <transition name="fade">
-        <div
-          v-if="currentForcePopup"
-          class="fixed inset-0 z-[60] flex items-center justify-center px-6"
-        >
-          <div class="absolute inset-0 bg-black/50" @click="handleForcePopupDismiss" />
-          <div class="relative w-full max-w-sm bg-white rounded-2xl shadow-2xl overflow-hidden">
-            <!-- 顶部装饰条 -->
-            <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
-            <div class="p-6">
-              <div class="flex items-center gap-2.5 mb-2">
-                  <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
-                    <Bell class="w-5 h-5 text-blue-500" />
-                  </div>
-                  <h3 class="text-base font-bold text-gray-900">{{ currentForcePopup.title }}</h3>
-                </div>
-              <div class="bg-gray-50 rounded-xl p-4 mb-4">
-                <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ currentForcePopup.content }}</p>
-              </div>
-              <Button class="w-full h-11 text-sm font-medium rounded-xl" @click="handleForcePopupDismiss">
-                我知道了
-              </Button>
+    <AppDialog
+      :open="!!currentForcePopup"
+      variant="center"
+      z-class="z-[60]"
+      overlay-class="bg-black/50"
+      wrapper-class="px-6"
+      panel-class="max-w-sm shadow-2xl"
+      :fade="true"
+      :title="currentForcePopup?.title || '公告'"
+      @update:open="(v: boolean) => { if (!v) handleForcePopupDismiss() }"
+    >
+      <!-- 顶部装饰条 -->
+      <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
+      <div class="p-6">
+        <div class="flex items-center gap-2.5 mb-2">
+            <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
+              <Bell class="w-5 h-5 text-blue-500" />
             </div>
+            <h3 class="text-base font-bold text-gray-900">{{ currentForcePopup?.title }}</h3>
           </div>
+        <div class="bg-gray-50 rounded-xl p-4 mb-4">
+          <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ currentForcePopup?.content }}</p>
         </div>
-      </transition>
-    </Teleport>
+        <Button class="w-full h-11 text-sm font-medium rounded-xl" @click="handleForcePopupDismiss">
+          我知道了
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- ======== 新手引导入口（全局：所有布局内页面显示；引导展示期间隐藏） ======== -->
     <button
@@ -507,24 +502,6 @@ onUnmounted(() => {
 </template>
 
 <style scoped>
-.fade-enter-active,
-.fade-leave-active {
-  transition: opacity 0.25s ease;
-}
-.fade-enter-from,
-.fade-leave-to {
-  opacity: 0;
-}
-
-.slide-up-enter-active,
-.slide-up-leave-active {
-  transition: transform 0.3s cubic-bezier(0.32, 0.72, 0, 1);
-}
-.slide-up-enter-from,
-.slide-up-leave-to {
-  transition: translateY(100%);
-}
-
 /* 引导入口气泡：上下浮动跳动，吸引注意但不刺眼 */
 @keyframes guide-bob {
   0%, 100% { transform: translateY(0); }

frondend/src/views/admin/AdminAgents.vue

@@ -18,7 +18,7 @@ import {
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
 import { Label } from '@/components/ui/label'
-import {  } from '@/components/ui/card'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as adminApi from '@/api/admin'
 
@@ -294,149 +294,157 @@ async function handleToggleStatus(agent: adminApi.AgentUser) {
     </div>
 
     <!-- 创建代理弹窗 -->
-    <Teleport to="body">
-      <div v-if="showCreateModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="showCreateModal = false">
-        <div class="bg-white rounded-xl shadow-xl w-full max-w-md mx-4 p-6">
-          <div class="flex items-center justify-between mb-4">
-            <h2 class="text-lg font-semibold text-gray-900">创建下级代理</h2>
-            <button class="text-gray-400 hover:text-gray-600" @click="showCreateModal = false">
-              <X class="w-5 h-5" />
-            </button>
-          </div>
+    <AppDialog
+      :open="showCreateModal"
+      variant="center"
+      panel-class="rounded-xl max-w-md mx-4 p-6"
+      title="创建下级代理"
+      @update:open="(v: boolean) => { if (!v) showCreateModal = false }"
+    >
+      <div class="flex items-center justify-between mb-4">
+        <h2 class="text-lg font-semibold text-gray-900">创建下级代理</h2>
+        <button class="text-gray-400 hover:text-gray-600" @click="showCreateModal = false">
+          <X class="w-5 h-5" />
+        </button>
+      </div>
 
-          <div class="space-y-3">
-            <div>
-              <Label class="mb-1 block text-sm text-gray-600">用户名</Label>
-              <Input v-model="createForm.username" placeholder="代理登录名" class="h-10 text-sm" />
-            </div>
-            <div>
-              <Label class="mb-1 block text-sm text-gray-600">密码</Label>
-              <Input v-model="createForm.password" type="password" placeholder="至少6位" class="h-10 text-sm" />
-            </div>
-            <div>
-              <Label class="mb-1 block text-sm text-gray-600">费率倍率</Label>
-              <Input v-model="createForm.rate" type="number" step="0.1" min="1" class="h-10 text-sm" />
-            </div>
-            <div>
-              <Label class="mb-1 block text-sm text-gray-600">初始充值金额（元）</Label>
-              <Input v-model="createForm.balance" type="number" step="10" min="0" class="h-10 text-sm" />
-            </div>
-          </div>
-
-          <div class="flex gap-2 mt-6">
-            <Button variant="outline" class="flex-1 h-10" @click="showCreateModal = false">取消</Button>
-            <Button class="flex-1 h-10" :disabled="createLoading" @click="handleCreateAgent">
-              <LoaderCircle v-if="createLoading" class="w-4 h-4 animate-spin mr-1" />
-              创建
-            </Button>
-          </div>
+      <div class="space-y-3">
+        <div>
+          <Label class="mb-1 block text-sm text-gray-600">用户名</Label>
+          <Input v-model="createForm.username" placeholder="代理登录名" class="h-10 text-sm" />
+        </div>
+        <div>
+          <Label class="mb-1 block text-sm text-gray-600">密码</Label>
+          <Input v-model="createForm.password" type="password" placeholder="至少6位" class="h-10 text-sm" />
+        </div>
+        <div>
+          <Label class="mb-1 block text-sm text-gray-600">费率倍率</Label>
+          <Input v-model="createForm.rate" type="number" step="0.1" min="1" class="h-10 text-sm" />
+        </div>
+        <div>
+          <Label class="mb-1 block text-sm text-gray-600">初始充值金额（元）</Label>
+          <Input v-model="createForm.balance" type="number" step="10" min="0" class="h-10 text-sm" />
         </div>
       </div>
-    </Teleport>
+
+      <div class="flex gap-2 mt-6">
+        <Button variant="outline" class="flex-1 h-10" @click="showCreateModal = false">取消</Button>
+        <Button class="flex-1 h-10" :disabled="createLoading" @click="handleCreateAgent">
+          <LoaderCircle v-if="createLoading" class="w-4 h-4 animate-spin mr-1" />
+          创建
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- 充值弹窗 -->
-    <Teleport to="body">
-      <div v-if="showRechargeModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="showRechargeModal = false">
-        <div class="bg-white rounded-xl shadow-xl w-full max-w-sm mx-4 p-6">
-          <div class="flex items-center justify-between mb-4">
-            <h2 class="text-lg font-semibold text-gray-900">
-              充值 - {{ rechargeTarget?.username }}
-              <span class="text-sm font-normal text-gray-500 ml-2">当前余额: {{ rechargeTarget?.balance.toFixed(2) }}</span>
-            </h2>
-            <button class="text-gray-400 hover:text-gray-600" @click="showRechargeModal = false">
-              <X class="w-5 h-5" />
-            </button>
-          </div>
-
-          <div>
-            <Label class="mb-1 block text-sm text-gray-600">充值金额（元）</Label>
-            <Input v-model.number="rechargeAmount" type="number" step="10" min="0" class="h-10 text-sm" />
-          </div>
-
-          <div class="flex gap-2 mt-6">
-            <Button variant="outline" class="flex-1 h-10" @click="showRechargeModal = false">取消</Button>
-            <Button class="flex-1 h-10" :disabled="rechargeLoading || rechargeAmount <= 0" @click="handleRecharge">
-              <LoaderCircle v-if="rechargeLoading" class="w-4 h-4 animate-spin mr-1" />
-              充值
-            </Button>
-          </div>
-        </div>
+    <AppDialog
+      :open="showRechargeModal"
+      variant="center"
+      panel-class="rounded-xl max-w-sm mx-4 p-6"
+      title="充值"
+      @update:open="(v: boolean) => { if (!v) showRechargeModal = false }"
+    >
+      <div class="flex items-center justify-between mb-4">
+        <h2 class="text-lg font-semibold text-gray-900">
+          充值 - {{ rechargeTarget?.username }}
+          <span class="text-sm font-normal text-gray-500 ml-2">当前余额: {{ rechargeTarget?.balance.toFixed(2) }}</span>
+        </h2>
+        <button class="text-gray-400 hover:text-gray-600" @click="showRechargeModal = false">
+          <X class="w-5 h-5" />
+        </button>
       </div>
-    </Teleport>
+
+      <div>
+        <Label class="mb-1 block text-sm text-gray-600">充值金额（元）</Label>
+        <Input v-model.number="rechargeAmount" type="number" step="10" min="0" class="h-10 text-sm" />
+      </div>
+
+      <div class="flex gap-2 mt-6">
+        <Button variant="outline" class="flex-1 h-10" @click="showRechargeModal = false">取消</Button>
+        <Button class="flex-1 h-10" :disabled="rechargeLoading || rechargeAmount <= 0" @click="handleRecharge">
+          <LoaderCircle v-if="rechargeLoading" class="w-4 h-4 animate-spin mr-1" />
+          充值
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- 修改费率弹窗 -->
-    <Teleport to="body">
-      <div v-if="showRateModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="showRateModal = false">
-        <div class="bg-white rounded-xl shadow-xl w-full max-w-sm mx-4 p-6">
-          <div class="flex items-center justify-between mb-4">
-            <h2 class="text-lg font-semibold text-gray-900">
-              修改费率 - {{ rateTarget?.username }}
-              <span class="text-sm font-normal text-gray-500 ml-2">当前: {{ rateTarget ? (rateTarget.rate * 100).toFixed(0) + '%' : '' }}</span>
-            </h2>
-            <button class="text-gray-400 hover:text-gray-600" @click="showRateModal = false">
-              <X class="w-5 h-5" />
-            </button>
-          </div>
-
-          <div>
-            <Label class="mb-1 block text-sm text-gray-600">新费率倍率</Label>
-            <Input v-model.number="rateValue" type="number" step="0.1" min="1" class="h-10 text-sm" />
-            <p class="text-xs text-gray-400 mt-1">不得低于自身费率</p>
-          </div>
-
-          <div class="flex gap-2 mt-6">
-            <Button variant="outline" class="flex-1 h-10" @click="showRateModal = false">取消</Button>
-            <Button class="flex-1 h-10" :disabled="rateLoading || rateValue <= 0" @click="handleUpdateRate">
-              <LoaderCircle v-if="rateLoading" class="w-4 h-4 animate-spin mr-1" />
-              保存
-            </Button>
-          </div>
-        </div>
+    <AppDialog
+      :open="showRateModal"
+      variant="center"
+      panel-class="rounded-xl max-w-sm mx-4 p-6"
+      title="修改费率"
+      @update:open="(v: boolean) => { if (!v) showRateModal = false }"
+    >
+      <div class="flex items-center justify-between mb-4">
+        <h2 class="text-lg font-semibold text-gray-900">
+          修改费率 - {{ rateTarget?.username }}
+          <span class="text-sm font-normal text-gray-500 ml-2">当前: {{ rateTarget ? (rateTarget.rate * 100).toFixed(0) + '%' : '' }}</span>
+        </h2>
+        <button class="text-gray-400 hover:text-gray-600" @click="showRateModal = false">
+          <X class="w-5 h-5" />
+        </button>
       </div>
-    </Teleport>
+
+      <div>
+        <Label class="mb-1 block text-sm text-gray-600">新费率倍率</Label>
+        <Input v-model.number="rateValue" type="number" step="0.1" min="1" class="h-10 text-sm" />
+        <p class="text-xs text-gray-400 mt-1">不得低于自身费率</p>
+      </div>
+
+      <div class="flex gap-2 mt-6">
+        <Button variant="outline" class="flex-1 h-10" @click="showRateModal = false">取消</Button>
+        <Button class="flex-1 h-10" :disabled="rateLoading || rateValue <= 0" @click="handleUpdateRate">
+          <LoaderCircle v-if="rateLoading" class="w-4 h-4 animate-spin mr-1" />
+          保存
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- 修改密码弹窗 (admin only) -->
-    <Teleport to="body">
-      <div v-if="showPasswordModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="showPasswordModal = false">
-        <div class="bg-white rounded-xl shadow-xl w-full max-w-sm mx-4 p-6">
-          <div class="flex items-center justify-between mb-4">
-            <h2 class="text-lg font-semibold text-gray-900">
-              修改密码 - {{ passwordTarget?.username }}
-            </h2>
-            <button class="text-gray-400 hover:text-gray-600" @click="showPasswordModal = false">
-              <X class="w-5 h-5" />
-            </button>
-          </div>
+    <AppDialog
+      :open="showPasswordModal"
+      variant="center"
+      panel-class="rounded-xl max-w-sm mx-4 p-6"
+      title="修改密码"
+      @update:open="(v: boolean) => { if (!v) showPasswordModal = false }"
+    >
+      <div class="flex items-center justify-between mb-4">
+        <h2 class="text-lg font-semibold text-gray-900">
+          修改密码 - {{ passwordTarget?.username }}
+        </h2>
+        <button class="text-gray-400 hover:text-gray-600" @click="showPasswordModal = false">
+          <X class="w-5 h-5" />
+        </button>
+      </div>
 
-          <div>
-            <Label class="mb-1 block text-sm text-gray-600">新密码</Label>
-            <div class="relative">
-              <Input
-                :type="showNewPassword ? 'text' : 'password'"
-                v-model="newPassword"
-                placeholder="至少6位"
-                class="h-10 text-sm pr-9"
-              />
-              <button
-                type="button"
-                class="absolute right-3 top-1/2 -translate-y-1/2 text-gray-400 hover:text-gray-600"
-                @click="showNewPassword = !showNewPassword"
-              >
-                <Eye v-if="showNewPassword" class="h-4 w-4" />
-                <EyeOff v-else class="h-4 w-4" />
-              </button>
-            </div>
-          </div>
-
-          <div class="flex gap-2 mt-6">
-            <Button variant="outline" class="flex-1 h-10" @click="showPasswordModal = false">取消</Button>
-            <Button class="flex-1 h-10" :disabled="passwordLoading || !newPassword || newPassword.length < 6" @click="handleUpdatePassword">
-              <LoaderCircle v-if="passwordLoading" class="w-4 h-4 animate-spin mr-1" />
-              确认修改
-            </Button>
-          </div>
+      <div>
+        <Label class="mb-1 block text-sm text-gray-600">新密码</Label>
+        <div class="relative">
+          <Input
+            :type="showNewPassword ? 'text' : 'password'"
+            v-model="newPassword"
+            placeholder="至少6位"
+            class="h-10 text-sm pr-9"
+          />
+          <button
+            type="button"
+            class="absolute right-3 top-1/2 -translate-y-1/2 text-gray-400 hover:text-gray-600"
+            @click="showNewPassword = !showNewPassword"
+          >
+            <Eye v-if="showNewPassword" class="h-4 w-4" />
+            <EyeOff v-else class="h-4 w-4" />
+          </button>
         </div>
       </div>
-    </Teleport>
+
+      <div class="flex gap-2 mt-6">
+        <Button variant="outline" class="flex-1 h-10" @click="showPasswordModal = false">取消</Button>
+        <Button class="flex-1 h-10" :disabled="passwordLoading || !newPassword || newPassword.length < 6" @click="handleUpdatePassword">
+          <LoaderCircle v-if="passwordLoading" class="w-4 h-4 animate-spin mr-1" />
+          确认修改
+        </Button>
+      </div>
+    </AppDialog>
   </div>
 </template>

frondend/src/views/admin/AdminAnnouncements.vue

@@ -4,6 +4,7 @@ import { Megaphone, Plus, Pencil, Trash2, X, Bell, Users, User, Bot, Search } fr
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
 import { Label } from '@/components/ui/label'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as adminApi from '@/api/admin'
 
@@ -329,129 +330,127 @@ function scopeLabel(item: AnnouncementEx) {
     </div>
 
     <!-- 创建弹窗 -->
-    <Teleport to="body">
-      <div
-        v-if="showCreateModal"
-        class="fixed inset-0 z-50 flex items-center justify-center"
-      >
-        <div class="absolute inset-0 bg-black/40" @click="showCreateModal = false" />
-        <div class="relative w-[85%] sm:max-w-md bg-white rounded-2xl shadow-xl overflow-hidden">
-          <div class="flex items-center justify-between px-5 pt-5 pb-3">
-            <h3 class="text-base font-semibold text-gray-900">{{ editingId ? '编辑公告' : '新建公告' }}</h3>
-            <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="showCreateModal = false">
-              <X class="w-4 h-4" />
-            </button>
-          </div>
+    <AppDialog
+      :open="showCreateModal"
+      variant="center"
+      panel-class="w-[85%] sm:max-w-md"
+      :title="editingId ? '编辑公告' : '新建公告'"
+      @update:open="(v: boolean) => { showCreateModal = v }"
+    >
+      <div class="flex items-center justify-between px-5 pt-5 pb-3">
+        <h3 class="text-base font-semibold text-gray-900">{{ editingId ? '编辑公告' : '新建公告' }}</h3>
+        <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="showCreateModal = false">
+          <X class="w-4 h-4" />
+        </button>
+      </div>
 
-          <div class="px-5 pb-5 space-y-4">
-            <div>
-              <label class="block text-xs font-medium text-gray-500 mb-1.5">公告标题</label>
-              <Input v-model="formTitle" placeholder="请输入公告标题" class="h-10 text-sm" />
-            </div>
+      <div class="px-5 pb-5 space-y-4">
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">公告标题</label>
+          <Input v-model="formTitle" placeholder="请输入公告标题" class="h-10 text-sm" />
+        </div>
 
-            <div>
-              <label class="block text-xs font-medium text-gray-500 mb-1.5">公告内容</label>
-              <textarea
-                v-model="formContent"
-                placeholder="请输入公告内容"
-                class="w-full h-24 px-3 py-2 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
-              />
-            </div>
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">公告内容</label>
+          <textarea
+            v-model="formContent"
+            placeholder="请输入公告内容"
+            class="w-full h-24 px-3 py-2 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
+          />
+        </div>
 
-            <div>
-              <label class="block text-xs font-medium text-gray-500 mb-1.5">推送对象类型</label>
-              <div class="flex gap-2">
-                <button
-                  class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
-                  :class="formTargetType === 'user' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
-                  @click="formTargetType = 'user'"
-                >普通用户</button>
-                <button
-                  class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
-                  :class="formTargetType === 'agent' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
-                  @click="formTargetType = 'agent'"
-                >代理</button>
-              </div>
-            </div>
-
-            <div>
-              <label class="block text-xs font-medium text-gray-500 mb-1.5">推送范围</label>
-              <div class="flex gap-2">
-                <button
-                  class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
-                  :class="formTargetMode === 'all' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
-                  @click="formTargetMode = 'all'"
-                >
-                  <Users class="w-3.5 h-3.5 inline mr-1" />
-                  全部
-                </button>
-                <button
-                  class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
-                  :class="formTargetMode === 'specific' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
-                  @click="formTargetMode = 'specific'"
-                >
-                  <User class="w-3.5 h-3.5 inline mr-1" />
-                  指定用户
-                </button>
-              </div>
-            </div>
-
-            <!-- 指定用户ID输入 -->
-            <div v-if="formTargetMode === 'specific'">
-              <label class="block text-xs font-medium text-gray-500 mb-1.5">用户ID</label>
-              <Input
-                v-model="formTargetUserId"
-                type="number"
-                placeholder="输入用户ID"
-                class="h-10 text-sm"
-              />
-              <p class="text-[10px] text-gray-400 mt-1">可以在用户管理页面查看用户ID</p>
-            </div>
-
-            <div class="flex items-center gap-3">
-              <button
-                class="relative w-10 h-5 rounded-full transition-colors flex-shrink-0"
-                :class="formForcePopup ? 'bg-blue-500' : 'bg-gray-300'"
-                @click="formForcePopup = !formForcePopup"
-              >
-                <div
-                  class="absolute top-0.5 w-4 h-4 rounded-full bg-white shadow transition-transform"
-                  :class="formForcePopup ? 'translate-x-[22px]' : 'translate-x-0.5'"
-                />
-              </button>
-              <div>
-                <label class="text-sm font-medium text-gray-700">强制弹出</label>
-                <p class="text-[10px] text-gray-400">用户未读时自动弹出公告对话框</p>
-              </div>
-            </div>
-
-            <div class="flex items-center gap-3">
-              <button
-                class="relative w-10 h-5 rounded-full transition-colors flex-shrink-0"
-                :class="formLoopPopup ? 'bg-blue-500' : 'bg-gray-300'"
-                @click="formLoopPopup = !formLoopPopup"
-              >
-                <div
-                  class="absolute top-0.5 w-4 h-4 rounded-full bg-white shadow transition-transform"
-                  :class="formLoopPopup ? 'translate-x-[22px]' : 'translate-x-0.5'"
-                />
-              </button>
-              <div>
-                <label class="text-sm font-medium text-gray-700">循环弹窗</label>
-                <p class="text-[10px] text-gray-400">每次刷新页面或进入首页都会强制弹窗（无视已读状态，需同时开启强制弹窗）</p>
-              </div>
-            </div>
-
-            <Button
-              class="w-full h-10 text-sm font-medium mt-2"
-              :disabled="creating"
-              @click="handleCreate"
-            >
-              {{ creating ? '保存中...' : (editingId ? '保存修改' : '发布公告') }}
-            </Button>
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">推送对象类型</label>
+          <div class="flex gap-2">
+            <button
+              class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
+              :class="formTargetType === 'user' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
+              @click="formTargetType = 'user'"
+            >普通用户</button>
+            <button
+              class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
+              :class="formTargetType === 'agent' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
+              @click="formTargetType = 'agent'"
+            >代理</button>
           </div>
         </div>
+
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">推送范围</label>
+          <div class="flex gap-2">
+            <button
+              class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
+              :class="formTargetMode === 'all' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
+              @click="formTargetMode = 'all'"
+            >
+              <Users class="w-3.5 h-3.5 inline mr-1" />
+              全部
+            </button>
+            <button
+              class="flex-1 h-10 rounded-lg text-sm font-medium transition-colors"
+              :class="formTargetMode === 'specific' ? 'bg-blue-500 text-white' : 'bg-gray-100 text-gray-600 hover:bg-gray-200'"
+              @click="formTargetMode = 'specific'"
+            >
+              <User class="w-3.5 h-3.5 inline mr-1" />
+              指定用户
+            </button>
+          </div>
+        </div>
+
+        <!-- 指定用户ID输入 -->
+        <div v-if="formTargetMode === 'specific'">
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">用户ID</label>
+          <Input
+            v-model="formTargetUserId"
+            type="number"
+            placeholder="输入用户ID"
+            class="h-10 text-sm"
+          />
+          <p class="text-[10px] text-gray-400 mt-1">可以在用户管理页面查看用户ID</p>
+        </div>
+
+        <div class="flex items-center gap-3">
+          <button
+            class="relative w-10 h-5 rounded-full transition-colors flex-shrink-0"
+            :class="formForcePopup ? 'bg-blue-500' : 'bg-gray-300'"
+            @click="formForcePopup = !formForcePopup"
+          >
+            <div
+              class="absolute top-0.5 w-4 h-4 rounded-full bg-white shadow transition-transform"
+              :class="formForcePopup ? 'translate-x-[22px]' : 'translate-x-0.5'"
+            />
+          </button>
+          <div>
+            <label class="text-sm font-medium text-gray-700">强制弹出</label>
+            <p class="text-[10px] text-gray-400">用户未读时自动弹出公告对话框</p>
+          </div>
+        </div>
+
+        <div class="flex items-center gap-3">
+          <button
+            class="relative w-10 h-5 rounded-full transition-colors flex-shrink-0"
+            :class="formLoopPopup ? 'bg-blue-500' : 'bg-gray-300'"
+            @click="formLoopPopup = !formLoopPopup"
+          >
+            <div
+              class="absolute top-0.5 w-4 h-4 rounded-full bg-white shadow transition-transform"
+              :class="formLoopPopup ? 'translate-x-[22px]' : 'translate-x-0.5'"
+            />
+          </button>
+          <div>
+            <label class="text-sm font-medium text-gray-700">循环弹窗</label>
+            <p class="text-[10px] text-gray-400">每次刷新页面或进入首页都会强制弹窗（无视已读状态，需同时开启强制弹窗）</p>
+          </div>
+        </div>
+
+        <Button
+          class="w-full h-10 text-sm font-medium mt-2"
+          :disabled="creating"
+          @click="handleCreate"
+        >
+          {{ creating ? '保存中...' : (editingId ? '保存修改' : '发布公告') }}
+        </Button>
       </div>
-    </Teleport>
+    </AppDialog>
   </div>
 </template>

frondend/src/views/admin/AdminCdks.vue

@@ -17,6 +17,7 @@ import {
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
 import { Label } from '@/components/ui/label'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import { copyToClipboard } from '@/utils/clipboard'
 import * as adminApi from '@/api/admin'
@@ -182,8 +183,8 @@ async function copyCode(code: string, index: number) {
 
 async function copyResultCode(code: string, index: number) {
   if (await copyToClipboard(code)) {
-    resultCopiedIdx.value = index
-    setTimeout(() => { resultCopiedIdx.value = null }, 2000)
+    copiedResultIdx.value = index
+    setTimeout(() => { copiedResultIdx.value = null }, 2000)
     message.success('已复制')
   } else {
     message.error('复制失败，请长按 CDK 码手动复制')
@@ -434,181 +435,183 @@ function statusClass(s: string) {
     </div>
 
     <!-- 生成CDK弹窗（form / result 两视图） -->
-    <Teleport to="body">
-      <div v-if="showGenerateModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="modalView === 'form' ? (showGenerateModal = false) : null">
-        <div
-          class="bg-white rounded-xl shadow-xl w-full mx-4 p-6 flex flex-col"
-          :class="modalView === 'result' ? 'max-w-lg max-h-[80vh]' : 'max-w-sm'"
-        >
-          <!-- 配置视图 -->
-          <template v-if="modalView === 'form'">
-            <div class="flex items-center justify-between mb-4 flex-shrink-0">
-              <h2 class="text-lg font-semibold text-gray-900">生成CDK</h2>
-              <button class="text-gray-400 hover:text-gray-600" @click="closeGenerateModal">
-                <X class="w-5 h-5" />
-              </button>
-            </div>
+    <AppDialog
+      :open="showGenerateModal"
+      variant="center"
+      :dismissable="modalView === 'form'"
+      :panel-class="modalView === 'result' ? 'rounded-xl mx-4 p-6 max-w-lg max-h-[80vh]' : 'rounded-xl mx-4 p-6 max-w-sm'"
+      title="生成CDK"
+      @update:open="(v: boolean) => { if (!v && modalView === 'form') showGenerateModal = false }"
+    >
+      <!-- 配置视图 -->
+      <template v-if="modalView === 'form'">
+        <div class="flex items-center justify-between mb-4 flex-shrink-0">
+          <h2 class="text-lg font-semibold text-gray-900">生成CDK</h2>
+          <button class="text-gray-400 hover:text-gray-600" @click="closeGenerateModal">
+            <X class="w-5 h-5" />
+          </button>
+        </div>
 
-            <div class="space-y-3">
-              <div>
-                <Label class="mb-2 block text-sm text-gray-600">CDK 类型</Label>
-                <div class="grid grid-cols-2 gap-2">
-                  <button
-                    type="button"
-                    class="h-10 rounded-md border text-sm font-medium transition-colors"
-                    :class="generateType === 'count' ? 'bg-emerald-600 text-white border-emerald-600' : 'bg-white text-gray-700 border-gray-300 hover:border-emerald-400'"
-                    @click="generateType = 'count'"
-                  >次数 CDK</button>
-                  <button
-                    type="button"
-                    class="h-10 rounded-md border text-sm font-medium transition-colors"
-                    :class="generateType === 'vip' ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
-                    @click="generateType = 'vip'"
-                  >⭐ VIP CDK</button>
-                </div>
-              </div>
-              <div>
-                <Label class="mb-1 block text-sm text-gray-600">生成数量</Label>
-                <Input v-model.number="generateCount" type="number" min="1" max="100" class="h-10 text-sm" />
-                <p class="text-xs text-gray-400 mt-1">单次最多100个</p>
-              </div>
-              <template v-if="generateType === 'count'">
-                <div>
-                  <Label class="mb-1 block text-sm text-gray-600">每张可运行次数</Label>
-                  <Input v-model.number="generateMaxRuns" type="number" min="1" max="999" class="h-10 text-sm" />
-                  <p class="text-xs text-gray-400 mt-1">每张CDK可兑换使用的次数，成本 = 基础单价 × 次数 × 费率</p>
-                </div>
-              </template>
-              <template v-else>
-                <div>
-                  <Label class="mb-1 block text-sm text-gray-600">VIP 卡类型</Label>
-                  <div class="grid grid-cols-2 gap-2">
-                    <button
-                      type="button"
-                      class="h-10 rounded-md border text-sm font-medium transition-colors"
-                      :class="generateVipDays === 7 ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
-                      @click="generateVipDays = 7"
-                    >周卡 · 7天</button>
-                    <button
-                      type="button"
-                      class="h-10 rounded-md border text-sm font-medium transition-colors"
-                      :class="generateVipDays === 30 ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
-                      @click="generateVipDays = 30"
-                    >月卡 · 30天</button>
-                  </div>
-                  <p class="text-xs text-gray-400 mt-1">兑换后从当前到期时间顺延，到期即享免扣次数执行任务</p>
-                </div>
-              </template>
+        <div class="space-y-3">
+          <div>
+            <Label class="mb-2 block text-sm text-gray-600">CDK 类型</Label>
+            <div class="grid grid-cols-2 gap-2">
+              <button
+                type="button"
+                class="h-10 rounded-md border text-sm font-medium transition-colors"
+                :class="generateType === 'count' ? 'bg-emerald-600 text-white border-emerald-600' : 'bg-white text-gray-700 border-gray-300 hover:border-emerald-400'"
+                @click="generateType = 'count'"
+              >次数 CDK</button>
+              <button
+                type="button"
+                class="h-10 rounded-md border text-sm font-medium transition-colors"
+                :class="generateType === 'vip' ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
+                @click="generateType = 'vip'"
+              >⭐ VIP CDK</button>
             </div>
-
-            <div class="flex gap-2 mt-6">
-              <Button variant="outline" class="flex-1 h-10" @click="showGenerateModal = false">取消</Button>
-              <Button class="flex-1 h-10" :disabled="generateLoading" @click="handleGenerate">
-                <LoaderCircle v-if="generateLoading" class="w-4 h-4 animate-spin mr-1" />
-                {{ generateLoading ? '生成中...' : '生成' }}
-              </Button>
+          </div>
+          <div>
+            <Label class="mb-1 block text-sm text-gray-600">生成数量</Label>
+            <Input v-model.number="generateCount" type="number" min="1" max="100" class="h-10 text-sm" />
+            <p class="text-xs text-gray-400 mt-1">单次最多100个</p>
+          </div>
+          <template v-if="generateType === 'count'">
+            <div>
+              <Label class="mb-1 block text-sm text-gray-600">每张可运行次数</Label>
+              <Input v-model.number="generateMaxRuns" type="number" min="1" max="999" class="h-10 text-sm" />
+              <p class="text-xs text-gray-400 mt-1">每张CDK可兑换使用的次数，成本 = 基础单价 × 次数 × 费率</p>
             </div>
           </template>
-
-          <!-- 结果视图：展示全部CDK -->
           <template v-else>
-            <div class="flex items-center justify-between mb-3 flex-shrink-0">
-              <div>
-                <h2 class="text-lg font-semibold text-gray-900 flex items-center gap-2">
-                  <CheckCircle2 class="w-5 h-5 text-green-500" />
-                  生成成功
-                </h2>
-                <p class="text-xs text-gray-400 mt-0.5">
-                  共 {{ resultCdks.length }} 个CDK ·
-                  <template v-if="generateType === 'vip'">{{ generateVipDays === 7 ? 'VIP 周卡 7 天' : 'VIP 月卡 30 天' }} · </template>
-                  <template v-else>每张 {{ generateMaxRuns }} 次 · </template>
-                  扣费
-                  <span class="font-mono text-gray-600">{{ resultCost.toFixed(2) }} 元</span>
-                </p>
-              </div>
-              <button class="text-gray-400 hover:text-gray-600" @click="closeGenerateModal">
-                <X class="w-5 h-5" />
-              </button>
-            </div>
-
-            <!-- CDK 列表（可滚动） -->
-            <div class="flex-1 overflow-y-auto border border-gray-100 rounded-lg bg-gray-50/60 min-h-[120px] max-h-[40vh]">
-              <div
-                v-for="cdk in resultCdks"
-                :key="cdk.id"
-                class="flex items-center justify-between px-3 py-2 border-b border-gray-100 last:border-0 bg-white"
-              >
-                <code class="font-mono text-xs text-gray-800">{{ cdk.code }}</code>
+            <div>
+              <Label class="mb-1 block text-sm text-gray-600">VIP 卡类型</Label>
+              <div class="grid grid-cols-2 gap-2">
                 <button
-                  class="flex-shrink-0 inline-flex items-center gap-1 px-2 py-1 rounded-md text-[11px] transition-colors"
-                  :class="copiedResultIdx === resultCdks.indexOf(cdk) ? 'text-green-600 bg-green-50' : 'text-blue-500 hover:bg-blue-50'"
-                  @click="copyResultCode(cdk.code, resultCdks.indexOf(cdk))"
-                >
-                  <Copy v-if="copiedResultIdx !== resultCdks.indexOf(cdk)" class="w-3 h-3" />
-                  <CheckCheck v-else class="w-3 h-3" />
-                  复制
-                </button>
+                  type="button"
+                  class="h-10 rounded-md border text-sm font-medium transition-colors"
+                  :class="generateVipDays === 7 ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
+                  @click="generateVipDays = 7"
+                >周卡 · 7天</button>
+                <button
+                  type="button"
+                  class="h-10 rounded-md border text-sm font-medium transition-colors"
+                  :class="generateVipDays === 30 ? 'bg-amber-500 text-white border-amber-500' : 'bg-white text-gray-700 border-gray-300 hover:border-amber-400'"
+                  @click="generateVipDays = 30"
+                >月卡 · 30天</button>
               </div>
+              <p class="text-xs text-gray-400 mt-1">兑换后从当前到期时间顺延，到期即享免扣次数执行任务</p>
             </div>
-
-            <div class="flex gap-2 mt-4 flex-shrink-0">
-              <Button variant="outline" class="h-10 px-4" @click="openGenerateModal">
-                <Plus class="w-4 h-4 mr-1" />
-                继续生成
-              </Button>
-              <Button class="flex-1 h-10" @click="copyAllCodes">
-                <CheckCheck v-if="copiedAll" class="w-4 h-4 mr-1" />
-                <Copy v-else class="w-4 h-4 mr-1" />
-                {{ copiedAll ? '已复制全部' : '复制全部CDK' }}
-              </Button>
-            </div>
-            <p class="text-center text-[10px] text-gray-300 mt-2">
-              提示：CDK 按行分隔，可直接粘贴到表格/文档批量分发
-            </p>
           </template>
         </div>
-      </div>
-    </Teleport>
+
+        <div class="flex gap-2 mt-6">
+          <Button variant="outline" class="flex-1 h-10" @click="showGenerateModal = false">取消</Button>
+          <Button class="flex-1 h-10" :disabled="generateLoading" @click="handleGenerate">
+            <LoaderCircle v-if="generateLoading" class="w-4 h-4 animate-spin mr-1" />
+            {{ generateLoading ? '生成中...' : '生成' }}
+          </Button>
+        </div>
+      </template>
+
+      <!-- 结果视图：展示全部CDK -->
+      <template v-else>
+        <div class="flex items-center justify-between mb-3 flex-shrink-0">
+          <div>
+            <h2 class="text-lg font-semibold text-gray-900 flex items-center gap-2">
+              <CheckCircle2 class="w-5 h-5 text-green-500" />
+              生成成功
+            </h2>
+            <p class="text-xs text-gray-400 mt-0.5">
+              共 {{ resultCdks.length }} 个CDK ·
+              <template v-if="generateType === 'vip'">{{ generateVipDays === 7 ? 'VIP 周卡 7 天' : 'VIP 月卡 30 天' }} · </template>
+              <template v-else>每张 {{ generateMaxRuns }} 次 · </template>
+              扣费
+              <span class="font-mono text-gray-600">{{ resultCost.toFixed(2) }} 元</span>
+            </p>
+          </div>
+          <button class="text-gray-400 hover:text-gray-600" @click="closeGenerateModal">
+            <X class="w-5 h-5" />
+          </button>
+        </div>
+
+        <!-- CDK 列表（可滚动） -->
+        <div class="flex-1 overflow-y-auto border border-gray-100 rounded-lg bg-gray-50/60 min-h-[120px] max-h-[40vh]">
+          <div
+            v-for="cdk in resultCdks"
+            :key="cdk.id"
+            class="flex items-center justify-between px-3 py-2 border-b border-gray-100 last:border-0 bg-white"
+          >
+            <code class="font-mono text-xs text-gray-800">{{ cdk.code }}</code>
+            <button
+              class="flex-shrink-0 inline-flex items-center gap-1 px-2 py-1 rounded-md text-[11px] transition-colors"
+              :class="copiedResultIdx === resultCdks.indexOf(cdk) ? 'text-green-600 bg-green-50' : 'text-blue-500 hover:bg-blue-50'"
+              @click="copyResultCode(cdk.code, resultCdks.indexOf(cdk))"
+            >
+              <Copy v-if="copiedResultIdx !== resultCdks.indexOf(cdk)" class="w-3 h-3" />
+              <CheckCheck v-else class="w-3 h-3" />
+              复制
+            </button>
+          </div>
+        </div>
+
+        <div class="flex gap-2 mt-4 flex-shrink-0">
+          <Button variant="outline" class="h-10 px-4" @click="openGenerateModal">
+            <Plus class="w-4 h-4 mr-1" />
+            继续生成
+          </Button>
+          <Button class="flex-1 h-10" @click="copyAllCodes">
+            <CheckCheck v-if="copiedAll" class="w-4 h-4 mr-1" />
+            <Copy v-else class="w-4 h-4 mr-1" />
+            {{ copiedAll ? '已复制全部' : '复制全部CDK' }}
+          </Button>
+        </div>
+        <p class="text-center text-[10px] text-gray-300 mt-2">
+          提示：CDK 按行分隔，可直接粘贴到表格/文档批量分发
+        </p>
+      </template>
+    </AppDialog>
 
     <!-- 禁用/恢复确认弹窗 -->
-    <Teleport to="body">
-      <div v-if="showStatusModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40" @click.self="showStatusModal = false">
-        <div class="bg-white rounded-xl shadow-xl w-full max-w-sm mx-4 p-6">
-          <div class="flex items-center gap-2.5 mb-3">
-            <div
-              class="w-9 h-9 rounded-xl flex items-center justify-center"
-              :class="statusAction === 'disable' ? 'bg-red-100' : 'bg-green-100'"
-            >
-              <Ban v-if="statusAction === 'disable'" class="w-4 h-4 text-red-500" />
-              <RotateCcw v-else class="w-4 h-4 text-green-600" />
-            </div>
-            <div>
-              <h2 class="text-base font-semibold text-gray-900">{{ statusText }}</h2>
-              <p class="text-xs text-gray-400 mt-0.5">{{ statusTarget?.code }}</p>
-            </div>
-          </div>
-          <p class="text-sm text-gray-500 leading-relaxed text-justify">
-            <template v-if="statusAction === 'disable'">
-              禁用后该CDK将<strong class="text-red-500">无法被用户兑换</strong>，如需使用可随时恢复。
-            </template>
-            <template v-else>
-              恢复后该CDK将重新变为<strong class="text-green-600">未使用</strong>状态，可被用户兑换。
-            </template>
-          </p>
-          <div class="flex gap-2 mt-5">
-            <Button variant="outline" class="flex-1 h-10" @click="showStatusModal = false">取消</Button>
-            <Button
-              class="flex-1 h-10"
-              :class="statusAction === 'disable' ? 'bg-red-500 hover:bg-red-600' : 'bg-green-500 hover:bg-green-600'"
-              :disabled="statusLoading"
-              @click="confirmStatusChange"
-            >
-              <LoaderCircle v-if="statusLoading" class="w-4 h-4 animate-spin mr-1" />
-              {{ statusAction === 'disable' ? '确认禁用' : '确认恢复' }}
-            </Button>
-          </div>
+    <AppDialog
+      :open="showStatusModal"
+      variant="center"
+      panel-class="rounded-xl max-w-sm mx-4 p-6"
+      :title="statusText"
+      @update:open="(v: boolean) => { if (!v) showStatusModal = false }"
+    >
+      <div class="flex items-center gap-2.5 mb-3">
+        <div
+          class="w-9 h-9 rounded-xl flex items-center justify-center"
+          :class="statusAction === 'disable' ? 'bg-red-100' : 'bg-green-100'"
+        >
+          <Ban v-if="statusAction === 'disable'" class="w-4 h-4 text-red-500" />
+          <RotateCcw v-else class="w-4 h-4 text-green-600" />
+        </div>
+        <div>
+          <h2 class="text-base font-semibold text-gray-900">{{ statusText }}</h2>
+          <p class="text-xs text-gray-400 mt-0.5">{{ statusTarget?.code }}</p>
         </div>
       </div>
-    </Teleport>
+      <p class="text-sm text-gray-500 leading-relaxed text-justify">
+        <template v-if="statusAction === 'disable'">
+          禁用后该CDK将<strong class="text-red-500">无法被用户兑换</strong>，如需使用可随时恢复。
+        </template>
+        <template v-else>
+          恢复后该CDK将重新变为<strong class="text-green-600">未使用</strong>状态，可被用户兑换。
+        </template>
+      </p>
+      <div class="flex gap-2 mt-5">
+        <Button variant="outline" class="flex-1 h-10" @click="showStatusModal = false">取消</Button>
+        <Button
+          class="flex-1 h-10"
+          :class="statusAction === 'disable' ? 'bg-red-500 hover:bg-red-600' : 'bg-green-500 hover:bg-green-600'"
+          :disabled="statusLoading"
+          @click="confirmStatusChange"
+        >
+          <LoaderCircle v-if="statusLoading" class="w-4 h-4 animate-spin mr-1" />
+          {{ statusAction === 'disable' ? '确认禁用' : '确认恢复' }}
+        </Button>
+      </div>
+    </AppDialog>
   </div>
 </template>

frondend/src/views/admin/AdminLayout.vue

@@ -21,6 +21,7 @@ import {
 } from 'lucide-vue-next'
 import { useMessage } from '@/composables/useMessage'
 import { Button } from '@/components/ui/button'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import type { AgentInfo } from '@/api/admin'
 import * as announceApi from '@/api/announcement'
 import type { AnnouncementItem } from '@/api/announcement'
@@ -328,55 +329,60 @@ function handleLogout() {
     </transition>
 
     <!-- 代理端公告详情弹窗 -->
-    <Teleport to="body">
-      <transition name="fade">
-        <div v-if="showDetail && detailItem" class="fixed inset-0 z-[60] flex items-center justify-center px-4">
-          <div class="absolute inset-0 bg-black/50" @click="showDetail = false" />
-          <div class="relative w-[85%] sm:max-w-sm bg-white rounded-2xl shadow-2xl overflow-hidden">
-            <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
-            <div class="p-6">
-              <div class="flex items-center justify-between mb-3">
-                <div class="flex items-center gap-2.5">
-                  <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
-                    <Bell class="w-5 h-5 text-blue-500" />
-                  </div>
-                  <h3 class="text-base font-bold text-gray-900">{{ detailItem.title }}</h3>
-                </div>
-                <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center flex-shrink-0" @click="showDetail = false">
-                  <X class="w-4 h-4 text-gray-400" />
-                </button>
-              </div>
-              <div class="flex items-center gap-2 mb-4">
-                <span class="text-[10px] text-gray-400">{{ new Date(detailItem.createdAt).toLocaleString('zh-CN') }}</span>
-              </div>
-              <div class="bg-gray-50 rounded-xl p-4 max-h-[50vh] overflow-y-auto">
-                <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ detailItem.content }}</p>
-              </div>
-              <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showDetail = false">关闭</Button>
+    <AppDialog
+      :open="showDetail && !!detailItem"
+      variant="center"
+      z-class="z-[60]"
+      wrapper-class="px-4"
+      overlay-class="bg-black/50"
+      panel-class="w-[85%] sm:max-w-sm shadow-2xl"
+      :fade="true"
+      title="公告详情"
+      @update:open="(v: boolean) => { if (!v) showDetail = false }"
+    >
+      <div class="h-1.5 bg-gradient-to-r from-blue-500 to-blue-400" />
+      <div class="p-6">
+        <div class="flex items-center justify-between mb-3">
+          <div class="flex items-center gap-2.5">
+            <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
+              <Bell class="w-5 h-5 text-blue-500" />
             </div>
+            <h3 class="text-base font-bold text-gray-900">{{ detailItem?.title }}</h3>
           </div>
+          <button class="w-7 h-7 rounded-full hover:bg-gray-100 flex items-center justify-center flex-shrink-0" @click="showDetail = false">
+            <X class="w-4 h-4 text-gray-400" />
+          </button>
         </div>
-      </transition>
-    </Teleport>
+        <div class="flex items-center gap-2 mb-4">
+          <span class="text-[10px] text-gray-400">{{ detailItem ? new Date(detailItem.createdAt).toLocaleString('zh-CN') : '' }}</span>
+        </div>
+        <div class="bg-gray-50 rounded-xl p-4 max-h-[50vh] overflow-y-auto">
+          <p class="text-sm text-gray-600 leading-relaxed whitespace-pre-wrap">{{ detailItem?.content }}</p>
+        </div>
+        <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showDetail = false">关闭</Button>
+      </div>
+    </AppDialog>
 
     <!-- 强制弹出公告 Dialog -->
-    <Teleport to="body">
-      <transition name="fade">
-        <div v-if="currentForcePopup" class="fixed inset-0 z-[60] flex items-center justify-center px-4">
-          <div class="absolute inset-0 bg-black/40" @click="dismissForcePopup" />
-          <div class="relative w-[85%] sm:max-w-sm bg-white rounded-2xl shadow-xl overflow-hidden">
-            <div class="p-6">
-              <div class="flex items-center gap-2 mb-1">
-                  <Bell class="w-5 h-5 text-blue-500" />
-                  <h3 class="text-base font-semibold text-gray-900">{{ currentForcePopup.title }}</h3>
-                </div>
-              <p class="text-sm text-gray-600 leading-relaxed mt-3 whitespace-pre-wrap">{{ currentForcePopup.content }}</p>
-              <Button class="mt-5 w-full h-10 text-sm font-medium" @click="dismissForcePopup">我知道了</Button>
-            </div>
+    <AppDialog
+      :open="!!currentForcePopup"
+      variant="center"
+      z-class="z-[60]"
+      wrapper-class="px-4"
+      panel-class="w-[85%] sm:max-w-sm"
+      :fade="true"
+      title="强制公告"
+      @update:open="(v: boolean) => { if (!v) dismissForcePopup() }"
+    >
+      <div class="p-6">
+        <div class="flex items-center gap-2 mb-1">
+            <Bell class="w-5 h-5 text-blue-500" />
+            <h3 class="text-base font-semibold text-gray-900">{{ currentForcePopup?.title }}</h3>
           </div>
-        </div>
-      </transition>
-    </Teleport>
+        <p class="text-sm text-gray-600 leading-relaxed mt-3 whitespace-pre-wrap">{{ currentForcePopup?.content }}</p>
+        <Button class="mt-5 w-full h-10 text-sm font-medium" @click="dismissForcePopup">我知道了</Button>
+      </div>
+    </AppDialog>
   </div>
 </template>
 

frondend/src/views/admin/AdminPendingSchools.vue

@@ -3,6 +3,7 @@ import { ref, onMounted } from 'vue'
 import { Shield, RefreshCw, CheckCircle, XCircle, Search, Eye, EyeOff, Copy } from 'lucide-vue-next'
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import { copyToClipboard } from '@/utils/clipboard'
 import api from '@/api/index'
@@ -383,42 +384,42 @@ async function copyText(text: string) {
     </div>
 
     <!-- 拒绝理由弹窗 -->
-    <Teleport to="body">
-      <div
-        v-if="rejectTarget"
-        class="fixed inset-0 z-50 bg-black/40 flex items-center justify-center px-4"
-        @click.self="closeRejectModal"
-      >
-        <div class="bg-white rounded-2xl w-full max-w-md p-6 shadow-xl">
-          <div class="flex items-center gap-3 mb-4">
-            <div class="w-9 h-9 rounded-full bg-red-50 flex items-center justify-center">
-              <XCircle class="w-5 h-5 text-red-500" />
-            </div>
-            <div>
-              <h3 class="text-base font-bold text-gray-900">拒绝适配申请</h3>
-              <p class="text-xs text-gray-400">{{ rejectTarget.schoolName }}</p>
-            </div>
-          </div>
-          <label class="block text-sm text-gray-600 mb-1.5">拒绝理由 <span class="text-red-500">*</span></label>
-          <textarea
-            v-model="rejectReason"
-            rows="4"
-            maxlength="500"
-            placeholder="请说明拒绝理由（必填），理由将通过邮件通知该学校的联系邮箱"
-            class="w-full rounded-lg border border-gray-200 px-3 py-2.5 text-sm text-gray-900 placeholder:text-gray-300 focus:outline-none focus:ring-2 focus:ring-red-100 focus:border-red-300 resize-none"
-          ></textarea>
-          <p class="text-[11px] text-gray-400 mt-1">发送后将邮件通知该条记录的联系邮箱</p>
-          <div class="flex justify-end gap-2 mt-5">
-            <Button variant="outline" size="sm" class="h-9 text-xs" :disabled="rejectSubmitting" @click="closeRejectModal">
-              取消
-            </Button>
-            <Button size="sm" class="h-9 text-xs bg-red-500 hover:bg-red-600 text-white" :disabled="rejectSubmitting" @click="confirmReject">
-              <XCircle class="w-3.5 h-3.5 mr-1" />
-              {{ rejectSubmitting ? '提交中...' : '确认拒绝' }}
-            </Button>
-          </div>
+    <AppDialog
+      :open="!!rejectTarget"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="max-w-md p-6"
+      :dismissable="!rejectSubmitting"
+      title="拒绝适配申请"
+      @update:open="(v: boolean) => { if (!v) closeRejectModal() }"
+    >
+      <div class="flex items-center gap-3 mb-4">
+        <div class="w-9 h-9 rounded-full bg-red-50 flex items-center justify-center">
+          <XCircle class="w-5 h-5 text-red-500" />
+        </div>
+        <div>
+          <h3 class="text-base font-bold text-gray-900">拒绝适配申请</h3>
+          <p class="text-xs text-gray-400">{{ rejectTarget?.schoolName }}</p>
         </div>
       </div>
-    </Teleport>
+      <label class="block text-sm text-gray-600 mb-1.5">拒绝理由 <span class="text-red-500">*</span></label>
+      <textarea
+        v-model="rejectReason"
+        rows="4"
+        maxlength="500"
+        placeholder="请说明拒绝理由（必填），理由将通过邮件通知该学校的联系邮箱"
+        class="w-full rounded-lg border border-gray-200 px-3 py-2.5 text-sm text-gray-900 placeholder:text-gray-300 focus:outline-none focus:ring-2 focus:ring-red-100 focus:border-red-300 resize-none"
+      ></textarea>
+      <p class="text-[11px] text-gray-400 mt-1">发送后将邮件通知该条记录的联系邮箱</p>
+      <div class="flex justify-end gap-2 mt-5">
+        <Button variant="outline" size="sm" class="h-9 text-xs" :disabled="rejectSubmitting" @click="closeRejectModal">
+          取消
+        </Button>
+        <Button size="sm" class="h-9 text-xs bg-red-500 hover:bg-red-600 text-white" :disabled="rejectSubmitting" @click="confirmReject">
+          <XCircle class="w-3.5 h-3.5 mr-1" />
+          {{ rejectSubmitting ? '提交中...' : '确认拒绝' }}
+        </Button>
+      </div>
+    </AppDialog>
   </div>
 </template>

frondend/src/views/admin/AdminUsers.vue

@@ -30,7 +30,7 @@ import {
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
 import { Label } from '@/components/ui/label'
-import { Card } from '@/components/ui/card'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as adminApi from '@/api/admin'
 
@@ -125,6 +125,8 @@ interface AdminTaskLogItem {
   isSuccess: boolean
   errorMessage: string
   createdAt: string
+  deleted: boolean
+  source: number
 }
 
 const showLogsModal = ref(false)
@@ -229,6 +231,8 @@ function isTodayLogin(lastLoginAt: string) {
 function taskTypeLabel(t: string) {
   if (t === 'sign') return '签到'
   if (t === 'sleep_check') return '查寝'
+  if (t === 'leave_apply') return '请假'
+  if (t === 'leave_report') return '销假'
   return t
 }
 
@@ -609,332 +613,331 @@ function todayStatusLabel(s: string) {
     </div>
 
     <!-- 详情弹窗 -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div v-if="showDetail" class="fixed inset-0 z-50 flex items-center justify-center px-4">
-          <div class="absolute inset-0 bg-black/40" @click="showDetail = false" />
-          <div class="relative w-[90%] sm:max-w-lg bg-white rounded-2xl shadow-xl overflow-hidden max-h-[90vh] flex flex-col">
-            <div class="h-1.5 bg-gradient-to-r from-green-500 to-green-400" />
-            <div class="flex items-center justify-between px-5 pt-5 pb-3">
-              <div class="flex items-center gap-2.5">
-                <div class="w-9 h-9 rounded-xl bg-green-100 flex items-center justify-center">
-                  <Users class="w-5 h-5 text-green-500" />
-                </div>
-                <div>
-                  <h3 class="text-base font-semibold text-gray-900">用户详情</h3>
-                  <p class="text-xs text-gray-400">{{ detailUser?.username }}</p>
-                </div>
-              </div>
-              <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="showDetail = false">
-                <X class="w-4 h-4" />
-              </button>
-            </div>
-
-            <div v-if="detailLoading" class="flex items-center justify-center py-16">
-              <LoaderCircle class="w-6 h-6 animate-spin text-green-500" />
-            </div>
-
-            <div v-else-if="detailUser" class="px-5 pb-5 overflow-y-auto space-y-3">
-              <!-- 状态 -->
-              <div class="flex items-center gap-2 px-3 py-2 rounded-lg"
-                :class="detailUser.status === 'disabled' ? 'bg-red-50' : 'bg-green-50'">
-                <AlertTriangle v-if="detailUser.status === 'disabled'" class="w-4 h-4 text-red-500" />
-                <CheckCircle v-else class="w-4 h-4 text-green-500" />
-                <span class="text-sm font-medium" :class="detailUser.status === 'disabled' ? 'text-red-700' : 'text-green-700'">
-                  {{ detailUser.status === 'disabled' ? '已禁用' : '正常' }}
-                </span>
-                <span v-if="detailUser.disabledReason" class="text-xs text-red-500 ml-2">原因：{{ detailUser.disabledReason }}</span>
-              </div>
-
-              <div class="grid grid-cols-2 gap-3">
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <School class="w-3.5 h-3.5" /> 学校
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.schoolName || '--' }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <IdCard class="w-3.5 h-3.5" /> 学工号
-                  </div>
-                  <p class="text-sm font-medium text-gray-900 font-mono">{{ detailUser.studentId || '--' }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Lock class="w-3.5 h-3.5" /> 密码
-                  </div>
-                  <div class="flex items-center gap-1">
-                    <p class="text-sm font-medium text-gray-900 font-mono truncate">
-                      {{ showPasswordMap[detailUser.id] ? detailUser.password : '••••••••' }}
-                    </p>
-                    <button class="flex-shrink-0 text-gray-400 hover:text-gray-600" @click="togglePassword(detailUser.id)">
-                      <EyeOff v-if="!showPasswordMap[detailUser.id]" class="w-3.5 h-3.5" />
-                      <Eye v-else class="w-3.5 h-3.5" />
-                    </button>
-                  </div>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <ClipboardCheck class="w-3.5 h-3.5" /> 签到次数
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.signCount }} 次</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Gift class="w-3.5 h-3.5" /> 邀请积分
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.inviteReward }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <UserPlus class="w-3.5 h-3.5" /> 邀请人数
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.invitedCount }} 人</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <UserPlus class="w-3.5 h-3.5" /> 邀请人
-                  </div>
-                  <p class="text-sm font-medium text-gray-900 truncate">{{ detailUser.inviterName || '--' }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <ClipboardCheck class="w-3.5 h-3.5" /> 任务数
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.taskCount }} 个</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Smartphone class="w-3.5 h-3.5" /> 设备码
-                  </div>
-                  <p class="text-sm font-medium text-gray-900 font-mono text-xs truncate">{{ detailUser.mobileCode || '未绑定' }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Calendar class="w-3.5 h-3.5" /> 注册时间
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.createdAt }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Clock class="w-3.5 h-3.5" /> 最后登录
-                  </div>
-                  <p class="text-sm font-medium text-gray-900">{{ detailUser.lastLoginAt || '--' }}</p>
-                </div>
-                <div class="bg-gray-50 rounded-xl p-3.5">
-                  <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
-                    <Globe class="w-3.5 h-3.5" /> 最后登录IP
-                  </div>
-                  <p class="text-sm font-medium text-gray-900 font-mono">{{ detailUser.lastLoginIp || '--' }}</p>
-                </div>
-              </div>
-            </div>
+    <AppDialog
+      :open="showDetail"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="w-[90%] sm:max-w-lg max-h-[90vh]"
+      :fade="true"
+      title="用户详情"
+      @update:open="(v: boolean) => { showDetail = v }"
+    >
+      <div class="h-1.5 bg-gradient-to-r from-green-500 to-green-400" />
+      <div class="flex items-center justify-between px-5 pt-5 pb-3">
+        <div class="flex items-center gap-2.5">
+          <div class="w-9 h-9 rounded-xl bg-green-100 flex items-center justify-center">
+            <Users class="w-5 h-5 text-green-500" />
+          </div>
+          <div>
+            <h3 class="text-base font-semibold text-gray-900">用户详情</h3>
+            <p class="text-xs text-gray-400">{{ detailUser?.username }}</p>
           </div>
         </div>
-      </Transition>
-    </Teleport>
+        <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="showDetail = false">
+          <X class="w-4 h-4" />
+        </button>
+      </div>
+
+      <div v-if="detailLoading" class="flex items-center justify-center py-16">
+        <LoaderCircle class="w-6 h-6 animate-spin text-green-500" />
+      </div>
+
+      <div v-else-if="detailUser" class="px-5 pb-5 overflow-y-auto space-y-3">
+        <!-- 状态 -->
+        <div class="flex items-center gap-2 px-3 py-2 rounded-lg"
+          :class="detailUser.status === 'disabled' ? 'bg-red-50' : 'bg-green-50'">
+          <AlertTriangle v-if="detailUser.status === 'disabled'" class="w-4 h-4 text-red-500" />
+          <CheckCircle v-else class="w-4 h-4 text-green-500" />
+          <span class="text-sm font-medium" :class="detailUser.status === 'disabled' ? 'text-red-700' : 'text-green-700'">
+            {{ detailUser.status === 'disabled' ? '已禁用' : '正常' }}
+          </span>
+          <span v-if="detailUser.disabledReason" class="text-xs text-red-500 ml-2">原因：{{ detailUser.disabledReason }}</span>
+        </div>
+
+        <div class="grid grid-cols-2 gap-3">
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <School class="w-3.5 h-3.5" /> 学校
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.schoolName || '--' }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <IdCard class="w-3.5 h-3.5" /> 学工号
+            </div>
+            <p class="text-sm font-medium text-gray-900 font-mono">{{ detailUser.studentId || '--' }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Lock class="w-3.5 h-3.5" /> 密码
+            </div>
+            <div class="flex items-center gap-1">
+              <p class="text-sm font-medium text-gray-900 font-mono truncate">
+                {{ showPasswordMap[detailUser.id] ? detailUser.password : '••••••••' }}
+              </p>
+              <button class="flex-shrink-0 text-gray-400 hover:text-gray-600" @click="togglePassword(detailUser.id)">
+                <EyeOff v-if="!showPasswordMap[detailUser.id]" class="w-3.5 h-3.5" />
+                <Eye v-else class="w-3.5 h-3.5" />
+              </button>
+            </div>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <ClipboardCheck class="w-3.5 h-3.5" /> 签到次数
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.signCount }} 次</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Gift class="w-3.5 h-3.5" /> 邀请积分
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.inviteReward }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <UserPlus class="w-3.5 h-3.5" /> 邀请人数
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.invitedCount }} 人</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <UserPlus class="w-3.5 h-3.5" /> 邀请人
+            </div>
+            <p class="text-sm font-medium text-gray-900 truncate">{{ detailUser.inviterName || '--' }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <ClipboardCheck class="w-3.5 h-3.5" /> 任务数
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.taskCount }} 个</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Smartphone class="w-3.5 h-3.5" /> 设备码
+            </div>
+            <p class="text-sm font-medium text-gray-900 font-mono text-xs truncate">{{ detailUser.mobileCode || '未绑定' }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Calendar class="w-3.5 h-3.5" /> 注册时间
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.createdAt }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Clock class="w-3.5 h-3.5" /> 最后登录
+            </div>
+            <p class="text-sm font-medium text-gray-900">{{ detailUser.lastLoginAt || '--' }}</p>
+          </div>
+          <div class="bg-gray-50 rounded-xl p-3.5">
+            <div class="flex items-center gap-2 text-xs text-gray-400 mb-1">
+              <Globe class="w-3.5 h-3.5" /> 最后登录IP
+            </div>
+            <p class="text-sm font-medium text-gray-900 font-mono">{{ detailUser.lastLoginIp || '--' }}</p>
+          </div>
+        </div>
+      </div>
+    </AppDialog>
 
     <!-- 禁用弹窗 -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div v-if="showDisableModal" class="fixed inset-0 z-50 flex items-center justify-center px-4">
-          <div class="absolute inset-0 bg-black/40" @click="showDisableModal = false" />
-          <div class="relative w-[85%] sm:max-w-sm bg-white rounded-2xl shadow-xl overflow-hidden">
-            <div class="h-1.5 bg-gradient-to-r from-red-500 to-orange-400" />
-            <div class="p-6 space-y-4">
-              <div class="flex items-center gap-2.5">
-                <div class="w-9 h-9 rounded-xl bg-red-100 flex items-center justify-center">
-                  <Ban class="w-5 h-5 text-red-500" />
-                </div>
-                <div>
-                  <h3 class="text-base font-semibold text-gray-900">禁用用户</h3>
-                  <p class="text-xs text-gray-400">{{ disableTarget?.username }}</p>
-                </div>
-              </div>
-
-              <div>
-                <Label class="mb-1.5 block text-xs font-medium text-gray-500">禁用原因</Label>
-                <textarea
-                  v-model="disableReason"
-                  placeholder="请输入禁用原因，用户登录时将看到此信息"
-                  class="w-full h-20 px-3 py-2 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-red-500/20 focus:border-red-400"
-                />
-              </div>
-
-              <div class="flex gap-2">
-                <Button
-                  variant="outline"
-                  class="flex-1 h-10 text-sm"
-                  @click="showDisableModal = false"
-                >取消</Button>
-                <Button
-                  class="flex-1 h-10 text-sm font-medium bg-red-500 hover:bg-red-600"
-                  :disabled="disabling || !disableReason.trim()"
-                  @click="handleDisable"
-                >
-                  {{ disabling ? '处理中...' : '确认禁用' }}
-                </Button>
-              </div>
-            </div>
+    <AppDialog
+      :open="showDisableModal"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="w-[85%] sm:max-w-sm"
+      :fade="true"
+      title="禁用用户"
+      @update:open="(v: boolean) => { showDisableModal = v }"
+    >
+      <div class="h-1.5 bg-gradient-to-r from-red-500 to-orange-400" />
+      <div class="p-6 space-y-4">
+        <div class="flex items-center gap-2.5">
+          <div class="w-9 h-9 rounded-xl bg-red-100 flex items-center justify-center">
+            <Ban class="w-5 h-5 text-red-500" />
+          </div>
+          <div>
+            <h3 class="text-base font-semibold text-gray-900">禁用用户</h3>
+            <p class="text-xs text-gray-400">{{ disableTarget?.username }}</p>
           </div>
         </div>
-      </Transition>
-    </Teleport>
+
+        <div>
+          <Label class="mb-1.5 block text-xs font-medium text-gray-500">禁用原因</Label>
+          <textarea
+            v-model="disableReason"
+            placeholder="请输入禁用原因，用户登录时将看到此信息"
+            class="w-full h-20 px-3 py-2 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-red-500/20 focus:border-red-400"
+          />
+        </div>
+
+        <div class="flex gap-2">
+          <Button
+            variant="outline"
+            class="flex-1 h-10 text-sm"
+            @click="showDisableModal = false"
+          >取消</Button>
+          <Button
+            class="flex-1 h-10 text-sm font-medium bg-red-500 hover:bg-red-600"
+            :disabled="disabling || !disableReason.trim()"
+            @click="handleDisable"
+          >
+            {{ disabling ? '处理中...' : '确认禁用' }}
+          </Button>
+        </div>
+      </div>
+    </AppDialog>
 
     <!-- 当天执行日志弹窗 -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div v-if="showLogsModal" class="fixed inset-0 z-50 flex items-center justify-center px-4">
-          <div class="absolute inset-0 bg-black/40" @click="showLogsModal = false" />
-          <div class="relative w-full sm:max-w-3xl bg-white rounded-2xl shadow-xl overflow-hidden flex flex-col max-h-[85vh]">
-            <div class="h-1.5 bg-gradient-to-r from-blue-500 to-cyan-400 flex-shrink-0" />
+    <AppDialog
+      :open="showLogsModal"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="sm:max-w-3xl"
+      :fade="true"
+      title="执行日志明细"
+      @update:open="(v: boolean) => { showLogsModal = v }"
+    >
+      <div class="h-1.5 bg-gradient-to-r from-blue-500 to-cyan-400 flex-shrink-0" />
 
-            <!-- 头部 -->
-            <div class="px-5 pt-4 pb-3 flex items-start justify-between flex-shrink-0">
-              <div>
-                <h3 class="text-base font-semibold text-gray-900">执行日志明细</h3>
-                <p class="text-xs text-gray-400 mt-0.5">{{ logsDate }} · 共 {{ logsTotal }} 条记录</p>
-              </div>
-              <button
-                class="p-1.5 rounded-lg text-gray-400 hover:text-gray-600 hover:bg-gray-100 transition-colors"
-                @click="showLogsModal = false"
-              >
-                <X class="w-4 h-4" />
-              </button>
-            </div>
-
-            <!-- 筛选栏 -->
-            <div class="px-5 pb-3 flex flex-wrap items-center gap-2 flex-shrink-0">
-              <input
-                type="date"
-                :value="logsDate"
-                class="h-9 px-2.5 rounded-lg border border-gray-200 text-sm text-gray-600 focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
-                @change="handleLogsDateChange"
-              />
-              <div class="flex rounded-lg border border-gray-200 overflow-hidden">
-                <button
-                  v-for="opt in logsStatusOptions"
-                  :key="opt.key"
-                  class="h-9 px-3 text-xs font-medium transition-colors"
-                  :class="logsStatus === opt.key ? 'bg-blue-500 text-white' : 'bg-white text-gray-500 hover:bg-gray-50'"
-                  @click="handleLogsStatusChange(opt.key)"
-                >
-                  {{ opt.label }}
-                </button>
-              </div>
-              <div class="relative flex-1 min-w-[180px]">
-                <Search class="absolute left-3 top-1/2 -translate-y-1/2 h-3.5 w-3.5 text-gray-400" />
-                <input
-                  v-model="logsKeyword"
-                  placeholder="搜索用户名/姓名/任务标题"
-                  class="w-full h-9 pl-8 pr-3 text-sm border border-gray-200 rounded-lg focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
-                  @keyup.enter="handleLogsSearch"
-                />
-              </div>
-              <Button variant="outline" class="h-9 text-sm" @click="handleLogsSearch">
-                <Search class="w-3.5 h-3.5 mr-1" />
-                搜索
-              </Button>
-            </div>
-
-            <!-- 列表 -->
-            <div class="flex-1 overflow-y-auto border-t border-gray-100">
-              <!-- 加载骨架 -->
-              <div v-if="logsLoading" class="p-5 space-y-3">
-                <div v-for="i in 6" :key="i" class="h-10 bg-gray-50 rounded animate-pulse" />
-              </div>
-
-              <!-- 空状态 -->
-              <div v-else-if="logItems.length === 0" class="text-center py-16 text-gray-400">
-                <ClipboardCheck class="w-10 h-10 mx-auto mb-3 opacity-30" />
-                <p class="text-sm">该日期暂无执行记录</p>
-              </div>
-
-              <!-- 日志表格 -->
-              <table v-else class="w-full text-sm table-fixed min-w-[640px]">
-                <thead>
-                  <tr class="bg-gray-50 text-left text-xs text-gray-500 sticky top-0">
-                    <th class="px-4 py-2.5 font-medium w-[80px]">时间</th>
-                    <th class="px-4 py-2.5 font-medium w-[130px]">用户</th>
-                    <th class="px-4 py-2.5 font-medium w-[64px]">类型</th>
-                    <th class="px-4 py-2.5 font-medium">任务标题</th>
-                    <th class="px-4 py-2.5 font-medium w-[60px]">状态</th>
-                    <th class="px-4 py-2.5 font-medium">说明</th>
-                  </tr>
-                </thead>
-                <tbody>
-                  <tr
-                    v-for="log in logItems"
-                    :key="log.id"
-                    class="border-t border-gray-50 hover:bg-gray-50/50 transition-colors align-top"
-                  >
-                    <td class="px-4 py-2.5 text-xs text-gray-500 whitespace-nowrap tabular-nums">{{ formatLogTime(log.createdAt) }}</td>
-                    <td class="px-4 py-2.5 truncate" :title="`${log.realName || ''}（${log.username}）`">
-                      <p class="text-gray-900 truncate leading-tight">{{ log.realName || log.username || '--' }}</p>
-                      <p class="text-[11px] text-gray-400 truncate leading-tight">{{ log.schoolName || '--' }}</p>
-                    </td>
-                    <td class="px-4 py-2.5">
-                      <span class="text-[10px] px-1.5 py-0.5 rounded-full font-medium bg-gray-100 text-gray-600">
-                        {{ taskTypeLabel(log.taskType) }}
-                      </span>
-                    </td>
-                    <td class="px-4 py-2.5 truncate text-gray-700" :title="log.realTitle || log.title">
-                      {{ log.realTitle || log.title || '--' }}
-                    </td>
-                    <td class="px-4 py-2.5 whitespace-nowrap">
-                      <span
-                        class="text-[10px] px-1.5 py-0.5 rounded-full font-medium inline-block"
-                        :class="log.isSuccess ? 'bg-green-100 text-green-700' : 'bg-red-100 text-red-700'"
-                      >
-                        {{ log.isSuccess ? '成功' : '失败' }}
-                      </span>
-                    </td>
-                    <td class="px-4 py-2.5">
-                      <span v-if="log.errorMessage" class="text-xs text-red-500 break-words">{{ log.errorMessage }}</span>
-                      <span v-else class="text-xs text-gray-300">--</span>
-                    </td>
-                  </tr>
-                </tbody>
-              </table>
-            </div>
-
-            <!-- 分页 -->
-            <div
-              v-if="logsTotal > 0"
-              class="flex items-center justify-between px-5 py-3 border-t border-gray-100 flex-shrink-0"
-            >
-              <span class="text-xs text-gray-400">第 {{ logsPage }} / {{ logsTotalPages }} 页</span>
-              <div class="flex items-center gap-2">
-                <button
-                  class="w-8 h-8 rounded-lg flex items-center justify-center hover:bg-gray-100 disabled:opacity-30"
-                  :disabled="logsPage <= 1"
-                  @click="handleLogsPage(logsPage - 1)"
-                >
-                  <ChevronLeft class="w-4 h-4" />
-                </button>
-                <button
-                  class="w-8 h-8 rounded-lg flex items-center justify-center hover:bg-gray-100 disabled:opacity-30"
-                  :disabled="logsPage >= logsTotalPages"
-                  @click="handleLogsPage(logsPage + 1)"
-                >
-                  <ChevronRight class="w-4 h-4" />
-                </button>
-              </div>
-            </div>
-          </div>
+      <!-- 头部 -->
+      <div class="px-5 pt-4 pb-3 flex items-start justify-between flex-shrink-0">
+        <div>
+          <h3 class="text-base font-semibold text-gray-900">执行日志明细</h3>
+          <p class="text-xs text-gray-400 mt-0.5">{{ logsDate }} · 共 {{ logsTotal }} 条记录</p>
         </div>
-      </Transition>
-    </Teleport>
+        <button
+          class="p-1.5 rounded-lg text-gray-400 hover:text-gray-600 hover:bg-gray-100 transition-colors"
+          @click="showLogsModal = false"
+        >
+          <X class="w-4 h-4" />
+        </button>
+      </div>
+
+      <!-- 筛选栏 -->
+      <div class="px-5 pb-3 flex flex-wrap items-center gap-2 flex-shrink-0">
+        <input
+          type="date"
+          :value="logsDate"
+          class="h-9 px-2.5 rounded-lg border border-gray-200 text-sm text-gray-600 focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
+          @change="handleLogsDateChange"
+        />
+        <div class="flex rounded-lg border border-gray-200 overflow-hidden">
+          <button
+            v-for="opt in logsStatusOptions"
+            :key="opt.key"
+            class="h-9 px-3 text-xs font-medium transition-colors"
+            :class="logsStatus === opt.key ? 'bg-blue-500 text-white' : 'bg-white text-gray-500 hover:bg-gray-50'"
+            @click="handleLogsStatusChange(opt.key)"
+          >
+            {{ opt.label }}
+          </button>
+        </div>
+        <div class="relative flex-1 min-w-[180px]">
+          <Search class="absolute left-3 top-1/2 -translate-y-1/2 h-3.5 w-3.5 text-gray-400" />
+          <input
+            v-model="logsKeyword"
+            placeholder="搜索用户名/姓名/任务标题"
+            class="w-full h-9 pl-8 pr-3 text-sm border border-gray-200 rounded-lg focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
+            @keyup.enter="handleLogsSearch"
+          />
+        </div>
+        <Button variant="outline" class="h-9 text-sm" @click="handleLogsSearch">
+          <Search class="w-3.5 h-3.5 mr-1" />
+          搜索
+        </Button>
+      </div>
+
+      <!-- 列表 -->
+      <div class="flex-1 overflow-y-auto border-t border-gray-100">
+        <!-- 加载骨架 -->
+        <div v-if="logsLoading" class="p-5 space-y-3">
+          <div v-for="i in 6" :key="i" class="h-10 bg-gray-50 rounded animate-pulse" />
+        </div>
+
+        <!-- 空状态 -->
+        <div v-else-if="logItems.length === 0" class="text-center py-16 text-gray-400">
+          <ClipboardCheck class="w-10 h-10 mx-auto mb-3 opacity-30" />
+          <p class="text-sm">该日期暂无执行记录</p>
+        </div>
+
+        <!-- 日志表格 -->
+        <table v-else class="w-full text-sm table-fixed min-w-[640px]">
+          <thead>
+            <tr class="bg-gray-50 text-left text-xs text-gray-500 sticky top-0">
+              <th class="px-4 py-2.5 font-medium w-[80px]">时间</th>
+              <th class="px-4 py-2.5 font-medium w-[130px]">用户</th>
+              <th class="px-4 py-2.5 font-medium w-[64px]">类型</th>
+              <th class="px-4 py-2.5 font-medium">任务标题</th>
+              <th class="px-4 py-2.5 font-medium w-[60px]">状态</th>
+              <th class="px-4 py-2.5 font-medium">说明</th>
+            </tr>
+          </thead>
+          <tbody>
+            <tr
+              v-for="log in logItems"
+              :key="`${log.source}-${log.id}`"
+              class="border-t border-gray-50 hover:bg-gray-50/50 transition-colors align-top"
+            >
+              <td class="px-4 py-2.5 text-xs text-gray-500 whitespace-nowrap tabular-nums">{{ formatLogTime(log.createdAt) }}</td>
+              <td class="px-4 py-2.5 truncate" :title="`${log.realName || ''}（${log.username}）`">
+                <p class="text-gray-900 truncate leading-tight">{{ log.realName || log.username || '--' }}</p>
+                <p class="text-[11px] text-gray-400 truncate leading-tight">{{ log.schoolName || '--' }}</p>
+              </td>
+              <td class="px-4 py-2.5">
+                <span class="text-[10px] px-1.5 py-0.5 rounded-full font-medium bg-gray-100 text-gray-600">
+                  {{ taskTypeLabel(log.taskType) }}
+                </span>
+              </td>
+              <td class="px-4 py-2.5 truncate text-gray-700" :title="log.realTitle || log.title">
+                {{ log.realTitle || log.title || '--' }}
+              </td>
+              <td class="px-4 py-2.5 whitespace-nowrap">
+                <span
+                  class="text-[10px] px-1.5 py-0.5 rounded-full font-medium inline-block"
+                  :class="log.isSuccess ? 'bg-green-100 text-green-700' : 'bg-red-100 text-red-700'"
+                >
+                  {{ log.isSuccess ? '成功' : '失败' }}
+                </span>
+                <span
+                  v-if="log.deleted"
+                  class="text-[10px] px-1.5 py-0.5 rounded-full font-medium inline-block ml-1 bg-gray-100 text-gray-400 border border-gray-200"
+                  title="用户已在客户端删除该日志，后台统计仍计入"
+                >
+                  已删除
+                </span>
+              </td>
+              <td class="px-4 py-2.5">
+                <span v-if="log.errorMessage" class="text-xs text-red-500 break-words">{{ log.errorMessage }}</span>
+                <span v-else class="text-xs text-gray-300">--</span>
+              </td>
+            </tr>
+          </tbody>
+        </table>
+      </div>
+
+      <!-- 分页 -->
+      <div
+        v-if="logsTotal > 0"
+        class="flex items-center justify-between px-5 py-3 border-t border-gray-100 flex-shrink-0"
+      >
+        <span class="text-xs text-gray-400">第 {{ logsPage }} / {{ logsTotalPages }} 页</span>
+        <div class="flex items-center gap-2">
+          <button
+            class="w-8 h-8 rounded-lg flex items-center justify-center hover:bg-gray-100 disabled:opacity-30"
+            :disabled="logsPage <= 1"
+            @click="handleLogsPage(logsPage - 1)"
+          >
+            <ChevronLeft class="w-4 h-4" />
+          </button>
+          <button
+            class="w-8 h-8 rounded-lg flex items-center justify-center hover:bg-gray-100 disabled:opacity-30"
+            :disabled="logsPage >= logsTotalPages"
+            @click="handleLogsPage(logsPage + 1)"
+          >
+            <ChevronRight class="w-4 h-4" />
+          </button>
+        </div>
+      </div>
+    </AppDialog>
   </div>
 </template>
-
-<style scoped>
-.fade-enter-active,
-.fade-leave-active {
-  transition: opacity 0.2s ease;
-}
-.fade-enter-from,
-.fade-leave-to {
-  opacity: 0;
-}
-</style>

frondend/src/views/bind/BindDeviceView.vue

@@ -1,7 +1,7 @@
 <script setup lang="ts">
 import { ref, onMounted, onUnmounted } from 'vue'
 import { useRouter } from 'vue-router'
-import { Smartphone, RefreshCw, CheckCircle, AlertCircle, Download, LogOut } from 'lucide-vue-next'
+import { Smartphone, RefreshCw, CheckCircle, AlertCircle, Download, ArrowLeft } from 'lucide-vue-next'
 import { Button } from '@/components/ui/button'
 import { useMessage } from '@/composables/useMessage'
 import * as authApi from '@/api/auth'
@@ -144,13 +144,9 @@ function stopPolling() {
   }
 }
 
-/** 退出登录：清除登录态并返回登录页（未扫码时可随时退出，避免一直卡在绑定页） */
-function handleLogout() {
-  stopPolling()
-  if (countdownTimer) clearInterval(countdownTimer)
-  localStorage.removeItem('access_token')
-  localStorage.removeItem('refresh_token')
-  router.push('/login')
+/** 返回上一页（本页仅由个人中心「重新绑定」进入，即回到个人中心） */
+function handleBack() {
+  router.back()
 }
 
 onMounted(() => {
@@ -171,7 +167,7 @@ onUnmounted(() => {
         <Smartphone class="w-7 h-7 text-white" />
       </div>
       <h1 class="text-xl font-bold text-gray-900">绑定设备</h1>
-      <p class="text-sm text-gray-400 mt-1">请用今日校园 App 扫描下方二维码完成绑定</p>
+      <p class="text-sm text-gray-400 mt-1">请扫描二维码，绑定设备信息</p>
     </div>
 
     <div class="flex-1 flex flex-col items-center px-6">
@@ -221,22 +217,15 @@ onUnmounted(() => {
             <div class="flex items-start gap-3">
               <div class="w-6 h-6 rounded-full bg-blue-500 text-white text-xs font-bold flex items-center justify-center flex-shrink-0 mt-0.5">1</div>
               <div>
-                <p class="text-sm text-gray-800">打开今日校园 App</p>
-                <p class="text-xs text-gray-400">在手机上启动今日校园并登录</p>
+                <p class="text-sm text-gray-800">保存二维码</p>
+                <p class="text-xs text-gray-400">点击上方按钮保存二维码图片</p>
               </div>
             </div>
             <div class="flex items-start gap-3">
               <div class="w-6 h-6 rounded-full bg-blue-500 text-white text-xs font-bold flex items-center justify-center flex-shrink-0 mt-0.5">2</div>
               <div>
-                <p class="text-sm text-gray-800">点击右上角扫一扫</p>
-                <p class="text-xs text-gray-400">扫描电脑屏幕上的二维码</p>
-              </div>
-            </div>
-            <div class="flex items-start gap-3">
-              <div class="w-6 h-6 rounded-full bg-blue-500 text-white text-xs font-bold flex items-center justify-center flex-shrink-0 mt-0.5">3</div>
-              <div>
-                <p class="text-sm text-gray-800">等待自动完成</p>
-                <p class="text-xs text-gray-400">扫码后自动获取设备码，绑定成功后自动跳转</p>
+                <p class="text-sm text-gray-800">打开今日校园右上角扫一扫</p>
+                <p class="text-xs text-gray-400">扫描二维码，绑定成功后自动跳转</p>
               </div>
             </div>
           </div>
@@ -266,14 +255,14 @@ onUnmounted(() => {
       </div>
     </div>
 
-    <!-- 底部：退出登录（未扫码时可随时退出当前账号） -->
+    <!-- 底部：返回个人中心 -->
     <div class="px-6 pb-8 flex justify-center">
       <button
-        class="inline-flex items-center gap-1.5 px-5 py-2 rounded-lg text-sm text-gray-500 hover:text-red-500 hover:bg-red-50 transition-colors"
-        @click="handleLogout"
+        class="inline-flex items-center gap-1.5 px-5 py-2 rounded-lg text-sm text-gray-500 hover:text-blue-600 hover:bg-blue-50 transition-colors"
+        @click="handleBack"
       >
-        <LogOut class="w-4 h-4" />
-        退出登录
+        <ArrowLeft class="w-4 h-4" />
+        返回
       </button>
     </div>
   </div>

frondend/src/views/login/LoginView.vue

@@ -1,10 +1,11 @@
 <script setup lang="ts">
-import { ref, onMounted, watch } from 'vue'
+import { ref, onMounted, watch, onUnmounted } from 'vue'
 import { useRouter } from 'vue-router'
-import { Search, User, Lock, Eye, EyeOff, RefreshCw, LogIn, GraduationCap, LoaderCircle, AlertTriangle, ExternalLink, FileText } from 'lucide-vue-next'
+import { Search, User, Lock, Eye, EyeOff, RefreshCw, LogIn, GraduationCap, LoaderCircle, AlertTriangle, ExternalLink, FileText, ShieldCheck, Smartphone } from 'lucide-vue-next'
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
 import { Label } from '@/components/ui/label'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as authApi from '@/api/auth'
 import * as ticketApi from '@/api/ticket'
@@ -31,6 +32,152 @@ const captchaError = ref('')
 
 const logging = ref(false)
 
+// 多因子认证（MFA）Dialog
+const showMFADialog = ref(false)
+const mfaToken = ref('')
+const mfaMessage = ref('')
+const mfaMethods = ref<authApi.MFAAuthMethod[]>([]) // 后端返回的全部可用验证方式
+const mfaSelectedType = ref('') // 当前选中的验证方式（reAuthType）
+const mfaStage = ref<'select' | 'input'>('select') // select=选择验证方式，input=输入验证码
+const mfaSending = ref(false) // 发送验证码中
+const mfaCode = ref('')
+const mfaSubmitting = ref(false)
+const mfaCountdown = ref(0) // MFA 会话剩余秒数
+let mfaTimer: ReturnType<typeof setInterval> | null = null
+
+function startMFACountdown(seconds: number) {
+  stopMFACountdown()
+  mfaCountdown.value = seconds
+  mfaTimer = setInterval(() => {
+    if (mfaCountdown.value > 0) {
+      mfaCountdown.value--
+    } else {
+      stopMFACountdown()
+    }
+  }, 1000)
+}
+
+function stopMFACountdown() {
+  if (mfaTimer) {
+    clearInterval(mfaTimer)
+    mfaTimer = null
+  }
+}
+
+onUnmounted(stopMFACountdown)
+
+// 打开 MFA Dialog（登录返回 code 4281：先选择验证方式再发送验证码）
+function openMFADialog(
+  token: string,
+  msg: string,
+  expiresIn: number,
+  methods?: authApi.MFAAuthMethod[],
+  defaultType?: string
+) {
+  mfaToken.value = token
+  mfaMessage.value = msg || '请选择验证方式获取验证码'
+  mfaMethods.value = methods && methods.length > 0 ? methods : []
+  // 默认选中：页面 default 标记 > 后端给的 defaultType > 列表首项
+  mfaSelectedType.value =
+    mfaMethods.value.find((m) => m.default)?.type || defaultType || mfaMethods.value[0]?.type || ''
+  // 无方式列表时（理论上仅兼容旧后端）跳过选择阶段，直接进入验证码输入
+  mfaStage.value = mfaMethods.value.length > 0 ? 'select' : 'input'
+  mfaCode.value = ''
+  showMFADialog.value = true
+  startMFACountdown(expiresIn > 0 ? expiresIn : 600)
+}
+
+// 选择验证方式
+function handleMFASelect(type: string) {
+  mfaSelectedType.value = type
+}
+
+// 发送 MFA 验证码（用户选定验证方式后）
+async function handleMFASend() {
+  if (!mfaSelectedType.value) {
+    message.info('请选择验证方式')
+    return
+  }
+  mfaSending.value = true
+  try {
+    const res = await authApi.sendMFACode({
+      mfaToken: mfaToken.value,
+      reAuthType: mfaSelectedType.value,
+    })
+    const body = res.data
+    if (body?.code === 0) {
+      // 发送成功：进入验证码输入阶段
+      mfaMessage.value = body?.message || '验证码已发送，请查收后输入'
+      mfaStage.value = 'input'
+      mfaCode.value = ''
+    } else if (body?.code === 4283) {
+      // 验证会话过期：关闭弹窗，引导重新登录
+      stopMFACountdown()
+      showMFADialog.value = false
+      message.error(body?.message || '验证会话已过期，请重新登录')
+    } else {
+      // 4284 发送失败等：弹窗留在选择界面，可重试或更换验证方式
+      message.error(body?.message || '验证码发送失败，请重试')
+    }
+  } catch (e: any) {
+    message.error(e?.response?.data?.message || '验证码发送失败，请重试')
+  } finally {
+    mfaSending.value = false
+  }
+}
+
+// 返回验证方式选择（更换方式重新获取验证码）
+function handleMFAReselect() {
+  mfaStage.value = 'select'
+  mfaCode.value = ''
+  mfaMessage.value = '请选择验证方式获取验证码'
+}
+
+// 提交 MFA 验证码
+async function handleMFAVerify() {
+  const code = mfaCode.value.trim()
+  if (!code) {
+    message.info('请输入验证码')
+    return
+  }
+  mfaSubmitting.value = true
+  try {
+    const res = await authApi.verifyMFA({ mfaToken: mfaToken.value, code })
+    const body = res.data
+    const data = body?.data
+    if (body?.code === 0 && data?.token?.accessToken) {
+      // 验证成功，进入登录态
+      stopMFACountdown()
+      showMFADialog.value = false
+      localStorage.setItem('access_token', data.token.accessToken)
+      localStorage.setItem('refresh_token', data.token.refreshToken)
+      message.success('登录成功')
+      router.replace('/home')
+    } else if (body?.code === 4283) {
+      // 验证会话过期：关闭弹窗，引导重新登录
+      stopMFACountdown()
+      showMFADialog.value = false
+      message.error(body?.message || '验证会话已过期，请重新登录')
+    } else {
+      // 验证码错误（4282）等：输入态保留，清空输入可重试
+      message.error(body?.message || '验证失败，请重试')
+      mfaCode.value = ''
+    }
+  } catch (e: any) {
+    const msg = e?.response?.data?.message || '验证失败，请重试'
+    message.error(msg)
+    mfaCode.value = ''
+  } finally {
+    mfaSubmitting.value = false
+  }
+}
+
+function closeMFADialog() {
+  showMFADialog.value = false
+  stopMFACountdown()
+  message.info('如需登录请重新提交')
+}
+
 // 登录失败 Dialog
 const showLoginFailDialog = ref(false)
 const loginErrorMessage = ref('')
@@ -168,7 +315,21 @@ async function handleLogin() {
       params.inviteCode = inviteCode.value.trim()
     }
     const res = await authApi.login(params)
-    const data = res.data?.data
+    const body: any = res.data
+
+    // 多因子认证：专用业务码 4281（HTTP 200），弹出「选择验证方式」弹窗而非错误弹窗
+    if (body?.code === 4281 && body?.data?.mfaToken) {
+      openMFADialog(
+        body.data.mfaToken,
+        body.message,
+        body.data?.expiresIn || 0,
+        body.data?.authMethods,
+        body.data?.defaultType
+      )
+      return
+    }
+
+    const data = body?.data
     if (data?.token?.accessToken) {
       localStorage.setItem('access_token', data.token.accessToken)
       localStorage.setItem('refresh_token', data.token.refreshToken)
@@ -181,11 +342,17 @@ async function handleLogin() {
   } catch (e: any) {
     const msg = e?.response?.data?.message || e?.message || '登录失败'
     const httpStatus = e?.response?.status || 0
+    const data = e?.response?.data?.data || {}
+
+    // 多因子认证：触发 MFA，弹出「选择验证方式」Dialog（兼容旧 needMFA 标记）
+    if (data?.needMFA && data?.mfaToken) {
+      openMFADialog(data.mfaToken, msg, data?.expiresIn || 0, data?.authMethods, data?.defaultType)
+      return
+    }
 
     // 401（密码错误等）弹出 Dialog 引导用户操作
     if (httpStatus === 401) {
-      const url = e?.response?.data?.data?.schoolUrl || ''
-      schoolUrl.value = url
+      schoolUrl.value = data?.schoolUrl || ''
       loginErrorMessage.value = msg
       showLoginFailDialog.value = true
     } else {
@@ -433,183 +600,307 @@ async function handleReportSubmit() {
       <p class="text-xs text-gray-300">copyright © 2026</p>
     </div>
 
-    <!-- ======== 登录失败 Dialog ======== -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div
-          v-if="showLoginFailDialog"
-          class="fixed inset-0 z-50 flex items-center justify-center px-6"
+    <!-- ======== 多因子认证（MFA）Dialog：选择验证方式 → 输入验证码 ======== -->
+    <AppDialog
+      :open="showMFADialog"
+      variant="center"
+      wrapper-class="px-6"
+      overlay-class="bg-black/50"
+      panel-class="max-w-sm shadow-2xl"
+      :fade="true"
+      title="多因子认证"
+      @update:open="(v: boolean) => { if (!v) closeMFADialog() }"
+    >
+      <!-- 顶部装饰条 -->
+      <div class="h-1.5 bg-gradient-to-r from-blue-500 to-cyan-400" />
+      <div class="p-6">
+        <!-- 标题 -->
+        <div class="flex items-center gap-2.5 mb-3">
+          <div class="w-9 h-9 rounded-xl bg-blue-100 flex items-center justify-center">
+            <ShieldCheck class="w-5 h-5 text-blue-500" />
+          </div>
+          <div>
+            <h3 class="text-base font-bold text-gray-900">多因子认证</h3>
+            <p class="text-[10px] text-gray-400 mt-0.5">该校登录需校验动态验证码</p>
+          </div>
+        </div>
+
+        <!-- ===== 阶段一：选择验证方式 ===== -->
+        <template v-if="mfaStage === 'select'">
+          <div class="bg-blue-50 rounded-xl p-3.5 mb-4">
+            <div class="flex items-start gap-2.5">
+              <Smartphone class="w-4 h-4 text-blue-500 flex-shrink-0 mt-0.5" />
+              <p class="text-sm text-blue-700 leading-relaxed">
+                {{ mfaMessage || '请选择验证方式获取验证码' }}
+              </p>
+            </div>
+            <p class="text-[10px] text-blue-400 mt-1.5 pl-6.5">验证会话 10 分钟内有效</p>
+          </div>
+
+          <!-- 验证方式列表 -->
+          <div class="space-y-2">
+            <button
+              v-for="m in mfaMethods"
+              :key="m.type"
+              class="w-full flex items-center justify-between px-3.5 py-3 rounded-xl border text-sm transition-colors disabled:opacity-60"
+              :class="
+                mfaSelectedType === m.type
+                  ? 'border-blue-400 bg-blue-50/60 text-blue-700 font-medium'
+                  : 'border-gray-200 text-gray-600 hover:border-blue-200 hover:bg-gray-50'
+              "
+              :disabled="mfaSending"
+              @click="handleMFASelect(m.type)"
+            >
+              <span>{{ m.name }}</span>
+              <span v-if="mfaSelectedType === m.type" class="text-blue-500 font-bold">✓</span>
+            </button>
+          </div>
+
+          <!-- 发送验证码 -->
+          <Button
+            class="mt-4 w-full h-11 text-sm font-medium rounded-xl"
+            :disabled="mfaSending || mfaCountdown <= 0 || !mfaSelectedType"
+            @click="handleMFASend"
+          >
+            <RefreshCw v-if="mfaSending" class="h-4 w-4 animate-spin" />
+            <template v-else-if="mfaCountdown <= 0">会话已过期，请重新登录</template>
+            <template v-else>发送验证码</template>
+          </Button>
+        </template>
+
+        <!-- ===== 阶段二：输入验证码 ===== -->
+        <template v-else>
+          <div class="bg-blue-50 rounded-xl p-3.5 mb-4">
+            <div class="flex items-start gap-2.5">
+              <Smartphone class="w-4 h-4 text-blue-500 flex-shrink-0 mt-0.5" />
+              <p class="text-sm text-blue-700 leading-relaxed">{{ mfaMessage }}</p>
+            </div>
+            <p class="text-[10px] text-blue-400 mt-1.5 pl-6.5">验证会话 10 分钟内有效，输错可重新输入</p>
+          </div>
+
+          <!-- 验证码输入 -->
+          <div>
+            <Label class="mb-1.5 block text-xs font-medium text-gray-500">验证码</Label>
+            <div class="relative">
+              <ShieldCheck class="absolute left-3 top-1/2 -translate-y-1/2 h-4 w-4 text-gray-400" />
+              <Input
+                v-model="mfaCode"
+                placeholder="请输入收到的验证码"
+                class="pl-9 pr-9 h-10 text-sm tracking-widest"
+                maxlength="8"
+                @keyup.enter="handleMFAVerify"
+              />
+              <span v-if="mfaCountdown > 0" class="absolute right-3 top-1/2 -translate-y-1/2 text-[10px] text-gray-300 tabular-nums">
+                {{ Math.floor(mfaCountdown / 60) }}:{{ String(mfaCountdown % 60).padStart(2, '0') }}
+              </span>
+            </div>
+          </div>
+
+          <!-- 提交按钮 -->
+          <Button
+            class="mt-4 w-full h-11 text-sm font-medium rounded-xl"
+            :disabled="mfaSubmitting || mfaCountdown <= 0"
+            @click="handleMFAVerify"
+          >
+            <RefreshCw v-if="mfaSubmitting" class="h-4 w-4 animate-spin" />
+            <template v-else-if="mfaCountdown <= 0">会话已过期，请重新登录</template>
+            <template v-else>验证并登录</template>
+          </Button>
+
+          <!-- 更换验证方式 -->
+          <button
+            class="mt-2.5 w-full text-center text-xs text-blue-400 hover:text-blue-600 transition-colors"
+            @click="handleMFAReselect"
+          >
+            更换验证方式
+          </button>
+        </template>
+
+        <!-- 取消 -->
+        <button
+          class="mt-2.5 w-full text-center text-xs text-gray-400 hover:text-gray-600 transition-colors"
+          @click="closeMFADialog"
         >
-          <div class="absolute inset-0 bg-black/50" @click="showLoginFailDialog = false" />
-          <div class="relative w-full max-w-sm bg-white rounded-2xl shadow-2xl overflow-hidden">
-            <!-- 顶部装饰条 -->
-            <div class="h-1.5 bg-gradient-to-r from-red-500 to-orange-400" />
-            <div class="p-6">
-              <!-- 错误图标 + 标题 -->
-              <div class="flex items-center gap-2.5 mb-3">
-                <div class="w-9 h-9 rounded-xl bg-red-100 flex items-center justify-center">
-                  <AlertTriangle class="w-5 h-5 text-red-500" />
-                </div>
-                <h3 class="text-base font-bold text-gray-900">登录失败</h3>
-              </div>
+          重新登录
+        </button>
+      </div>
+    </AppDialog>
 
-              <!-- 错误消息 -->
-              <div class="bg-red-50 rounded-xl p-3.5 mb-4">
-                <p class="text-sm text-red-700 leading-relaxed">{{ loginErrorMessage }}</p>
-              </div>
+    <!-- ======== 登录失败 Dialog ======== -->
+    <AppDialog
+      :open="showLoginFailDialog"
+      variant="center"
+      wrapper-class="px-6"
+      overlay-class="bg-black/50"
+      panel-class="max-w-sm shadow-2xl"
+      :fade="true"
+      title="登录失败"
+      @update:open="(v: boolean) => { if (!v) showLoginFailDialog = false }"
+    >
+      <!-- 顶部装饰条 -->
+      <div class="h-1.5 bg-gradient-to-r from-red-500 to-orange-400" />
+      <div class="p-6">
+        <!-- 错误图标 + 标题 -->
+        <div class="flex items-center gap-2.5 mb-3">
+          <div class="w-9 h-9 rounded-xl bg-red-100 flex items-center justify-center">
+            <AlertTriangle class="w-5 h-5 text-red-500" />
+          </div>
+          <h3 class="text-base font-bold text-gray-900">登录失败</h3>
+        </div>
 
-              <!-- 操作区域 -->
-              <div class="space-y-3">
-                <!-- 忘记密码 -->
-                <div
-                  v-if="schoolUrl"
-                  class="flex items-start gap-3 bg-gray-50 rounded-xl p-3.5 cursor-pointer hover:bg-blue-50/50 transition-colors border border-transparent hover:border-blue-100"
-                  @click="openSchoolUrl"
-                >
-                  <div class="w-7 h-7 rounded-lg bg-blue-100 flex items-center justify-center flex-shrink-0 mt-0.5">
-                    <ExternalLink class="w-4 h-4 text-blue-500" />
-                  </div>
-                  <div class="flex-1 min-w-0">
-                    <p class="text-sm font-medium text-gray-900">忘记密码？</p>
-                    <p class="text-xs text-gray-500 mt-0.5">点击将会打开学校官方登录地址，您可以在官方地址测试登录或者找回密码，然后回到本网站继续登录</p>
-                  </div>
-                </div>
+        <!-- 错误消息 -->
+        <div class="bg-red-50 rounded-xl p-3.5 mb-4">
+          <p class="text-sm text-red-700 leading-relaxed">{{ loginErrorMessage }}</p>
+        </div>
 
-                <!-- 提交工单 -->
-                <div
-                  class="flex items-start gap-3 bg-gray-50 rounded-xl p-3.5 cursor-pointer hover:bg-amber-50/50 transition-colors border border-transparent hover:border-amber-100"
-                  @click="handleSubmitTicket"
-                >
-                  <div class="w-7 h-7 rounded-lg bg-amber-100 flex items-center justify-center flex-shrink-0 mt-0.5">
-                    <FileText class="w-4 h-4 text-amber-500" />
-                  </div>
-                  <div class="flex-1 min-w-0">
-                    <p class="text-sm font-medium text-gray-900">确定密码正确但是提示密码错误？</p>
-                    <p class="text-xs text-gray-500 mt-0.5">点击这里提交工单</p>
-                  </div>
-                </div>
-              </div>
+        <!-- 操作区域 -->
+        <div class="space-y-3">
+          <!-- 忘记密码 -->
+          <div
+            v-if="schoolUrl"
+            class="flex items-start gap-3 bg-gray-50 rounded-xl p-3.5 cursor-pointer hover:bg-blue-50/50 transition-colors border border-transparent hover:border-blue-100"
+            @click="openSchoolUrl"
+          >
+            <div class="w-7 h-7 rounded-lg bg-blue-100 flex items-center justify-center flex-shrink-0 mt-0.5">
+              <ExternalLink class="w-4 h-4 text-blue-500" />
+            </div>
+            <div class="flex-1 min-w-0">
+              <p class="text-sm font-medium text-gray-900">忘记密码？</p>
+              <p class="text-xs text-gray-500 mt-0.5">点击将会打开学校官方登录地址，您可以在官方地址测试登录或者找回密码，然后回到本网站继续登录</p>
+            </div>
+          </div>
 
-              <!-- 关闭按钮 -->
-              <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showLoginFailDialog = false">
-                我知道了
-              </Button>
+          <!-- 提交工单 -->
+          <div
+            class="flex items-start gap-3 bg-gray-50 rounded-xl p-3.5 cursor-pointer hover:bg-amber-50/50 transition-colors border border-transparent hover:border-amber-100"
+            @click="handleSubmitTicket"
+          >
+            <div class="w-7 h-7 rounded-lg bg-amber-100 flex items-center justify-center flex-shrink-0 mt-0.5">
+              <FileText class="w-4 h-4 text-amber-500" />
+            </div>
+            <div class="flex-1 min-w-0">
+              <p class="text-sm font-medium text-gray-900">确定密码正确但是提示密码错误？</p>
+              <p class="text-xs text-gray-500 mt-0.5">点击这里提交工单</p>
             </div>
           </div>
         </div>
-      </Transition>
-    </Teleport>
+
+        <!-- 关闭按钮 -->
+        <Button class="mt-4 w-full h-11 text-sm font-medium rounded-xl" @click="showLoginFailDialog = false">
+          我知道了
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- ======== 提交工单 Dialog ======== -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div
-          v-if="showReportDialog"
-          class="fixed inset-0 z-50 flex items-center justify-center px-6"
-        >
-          <div class="absolute inset-0 bg-black/50" @click="closeReportDialog" />
-          <div class="relative w-full max-w-sm bg-white rounded-2xl shadow-2xl overflow-hidden">
-            <!-- 顶部装饰条 -->
-            <div class="h-1.5 bg-gradient-to-r from-amber-500 to-orange-400" />
-            <div class="p-6">
-              <!-- 标题 -->
-              <div class="flex items-center gap-2.5 mb-4">
-                <div class="w-9 h-9 rounded-xl bg-amber-100 flex items-center justify-center">
-                  <FileText class="w-5 h-5 text-amber-500" />
-                </div>
-                <div>
-                  <h3 class="text-base font-bold text-gray-900">提交工单</h3>
-                  <p class="text-[10px] text-gray-400 mt-0.5">提交后管理员将处理该学校适配问题</p>
-                </div>
-              </div>
+    <AppDialog
+      :open="showReportDialog"
+      variant="center"
+      wrapper-class="px-6"
+      overlay-class="bg-black/50"
+      panel-class="max-w-sm shadow-2xl"
+      :fade="true"
+      title="提交工单"
+      @update:open="(v: boolean) => { if (!v) closeReportDialog() }"
+    >
+      <!-- 顶部装饰条 -->
+      <div class="h-1.5 bg-gradient-to-r from-amber-500 to-orange-400" />
+      <div class="p-6">
+        <!-- 标题 -->
+        <div class="flex items-center gap-2.5 mb-4">
+          <div class="w-9 h-9 rounded-xl bg-amber-100 flex items-center justify-center">
+            <FileText class="w-5 h-5 text-amber-500" />
+          </div>
+          <div>
+            <h3 class="text-base font-bold text-gray-900">提交工单</h3>
+            <p class="text-[10px] text-gray-400 mt-0.5">提交后管理员将处理该学校适配问题</p>
+          </div>
+        </div>
 
-              <!-- 表单 -->
-              <div class="space-y-3">
-                <!-- 学校（只读） -->
-                <div>
-                  <Label class="mb-1 block text-xs font-medium text-gray-500">学校</Label>
-                  <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700">
-                    {{ selectedSchool?.name || '未选择' }}
-                  </div>
-                </div>
+        <!-- 表单 -->
+        <div class="space-y-3">
+          <!-- 学校（只读） -->
+          <div>
+            <Label class="mb-1 block text-xs font-medium text-gray-500">学校</Label>
+            <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700">
+              {{ selectedSchool?.name || '未选择' }}
+            </div>
+          </div>
 
-                <!-- 学工号（只读） -->
-                <div>
-                  <Label class="mb-1 block text-xs font-medium text-gray-500">学工号</Label>
-                  <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700">
-                    {{ username || '未填写' }}
-                  </div>
-                </div>
+          <!-- 学工号（只读） -->
+          <div>
+            <Label class="mb-1 block text-xs font-medium text-gray-500">学工号</Label>
+            <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700">
+              {{ username || '未填写' }}
+            </div>
+          </div>
 
-                <!-- 密码（只读） -->
-                <div>
-                  <Label class="mb-1 block text-xs font-medium text-gray-500">密码</Label>
-                  <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700 select-all">
-                    {{ password || '未填写' }}
-                  </div>
-                </div>
+          <!-- 密码（只读） -->
+          <div>
+            <Label class="mb-1 block text-xs font-medium text-gray-500">密码</Label>
+            <div class="h-10 px-3 bg-gray-50 rounded-xl border border-gray-200 flex items-center text-sm text-gray-700 select-all">
+              {{ password || '未填写' }}
+            </div>
+          </div>
 
-                <!-- 联系邮箱（前缀 + 后缀下拉） -->
-                <div>
-                  <Label class="mb-1 block text-xs font-medium text-gray-500">
-                    联系邮箱 <span class="text-red-400">*</span>
-                  </Label>
-                  <p class="text-[10px] text-gray-400 mb-1">适配完成后将通过该邮箱联系您，仅支持国内知名邮箱</p>
-                  <div class="flex gap-2">
-                    <Input
-                      v-model="reportEmailPrefix"
-                      placeholder="邮箱前缀"
-                      class="flex-1 h-10 text-sm"
-                    />
-                    <select
-                      v-model="reportEmailDomain"
-                      class="flex-shrink-0 w-[110px] h-10 px-2 rounded-xl border border-gray-200 text-sm text-gray-700 bg-white focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
-                    >
-                      <option v-for="d in emailDomains" :key="d" :value="d">@{{ d }}</option>
-                    </select>
-                  </div>
-                </div>
-
-                <!-- 验证码 -->
-                <div>
-                  <Label class="mb-1 block text-xs font-medium text-gray-500">验证码</Label>
-                  <div class="flex gap-2">
-                    <Input v-model="reportCaptchaCode" placeholder="输入验证码" class="flex-1 h-10 text-sm" />
-                    <div
-                      class="flex-shrink-0 w-[120px] h-10 rounded-lg border border-gray-200 overflow-hidden cursor-pointer bg-gray-50 flex items-center justify-center"
-                      @click="loadReportCaptcha"
-                    >
-                      <img
-                        v-if="reportCaptchaImage && !reportLoadingCaptcha"
-                        :src="reportCaptchaImage"
-                        alt="验证码"
-                        class="max-w-full max-h-full object-contain"
-                      />
-                      <div v-else-if="!reportLoadingCaptcha && reportCaptchaError" class="w-full h-full px-1 flex items-center justify-center">
-                        <span class="text-[10px] leading-tight text-red-400 text-center">{{ reportCaptchaError }}</span>
-                      </div>
-                      <div v-else class="w-full h-full flex items-center justify-center">
-                        <RefreshCw v-if="reportLoadingCaptcha" class="h-4 w-4 animate-spin text-gray-400" />
-                        <span v-else class="text-xs text-gray-400">加载中</span>
-                      </div>
-                    </div>
-                  </div>
-                </div>
-              </div>
-
-              <!-- 提交 -->
-              <Button
-                class="mt-4 w-full h-11 text-sm font-medium rounded-xl"
-                :disabled="reportSubmitting"
-                @click="handleReportSubmit"
+          <!-- 联系邮箱（前缀 + 后缀下拉） -->
+          <div>
+            <Label class="mb-1 block text-xs font-medium text-gray-500">
+              联系邮箱 <span class="text-red-400">*</span>
+            </Label>
+            <p class="text-[10px] text-gray-400 mb-1">适配完成后将通过该邮箱联系您，仅支持国内知名邮箱</p>
+            <div class="flex gap-2">
+              <Input
+                v-model="reportEmailPrefix"
+                placeholder="邮箱前缀"
+                class="flex-1 h-10 text-sm"
+              />
+              <select
+                v-model="reportEmailDomain"
+                class="flex-shrink-0 w-[110px] h-10 px-2 rounded-xl border border-gray-200 text-sm text-gray-700 bg-white focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
               >
-                <template v-if="reportSubmitting">提交中...</template>
-                <template v-else>提交</template>
-              </Button>
+                <option v-for="d in emailDomains" :key="d" :value="d">@{{ d }}</option>
+              </select>
+            </div>
+          </div>
+
+          <!-- 验证码 -->
+          <div>
+            <Label class="mb-1 block text-xs font-medium text-gray-500">验证码</Label>
+            <div class="flex gap-2">
+              <Input v-model="reportCaptchaCode" placeholder="输入验证码" class="flex-1 h-10 text-sm" />
+              <div
+                class="flex-shrink-0 w-[120px] h-10 rounded-lg border border-gray-200 overflow-hidden cursor-pointer bg-gray-50 flex items-center justify-center"
+                @click="loadReportCaptcha"
+              >
+                <img
+                  v-if="reportCaptchaImage && !reportLoadingCaptcha"
+                  :src="reportCaptchaImage"
+                  alt="验证码"
+                  class="max-w-full max-h-full object-contain"
+                />
+                <div v-else-if="!reportLoadingCaptcha && reportCaptchaError" class="w-full h-full px-1 flex items-center justify-center">
+                  <span class="text-[10px] leading-tight text-red-400 text-center">{{ reportCaptchaError }}</span>
+                </div>
+                <div v-else class="w-full h-full flex items-center justify-center">
+                  <RefreshCw v-if="reportLoadingCaptcha" class="h-4 w-4 animate-spin text-gray-400" />
+                  <span v-else class="text-xs text-gray-400">加载中</span>
+                </div>
+              </div>
             </div>
           </div>
         </div>
-      </Transition>
-    </Teleport>
+
+        <!-- 提交 -->
+        <Button
+          class="mt-4 w-full h-11 text-sm font-medium rounded-xl"
+          :disabled="reportSubmitting"
+          @click="handleReportSubmit"
+        >
+          <template v-if="reportSubmitting">提交中...</template>
+          <template v-else>提交</template>
+        </Button>
+      </div>
+    </AppDialog>
   </div>
 </template>

frondend/src/views/profile/ProfileView.vue

@@ -4,6 +4,7 @@ import { useRouter } from 'vue-router'
 import { LogOut, RefreshCw, ClipboardCheck, Gift, Share2, X, MessageSquare, Dices, TriangleAlert } from 'lucide-vue-next'
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as authApi from '@/api/auth'
 import type { UserInfo, MyInviteInfo } from '@/api/auth'
@@ -101,6 +102,9 @@ function maskDeviceCode(code: string): string {
   return code.slice(0, 4) + '****' + code.slice(-4)
 }
 
+// 是否已绑定设备码（决定「立即绑定 / 重新绑定」按钮文案）
+const hasDeviceCode = computed(() => !!userInfo.value?.mobileCode)
+
 onMounted(async () => {
   try {
     const res = await authApi.getUserInfo()
@@ -457,7 +461,7 @@ async function handleRedeemInvite() {
               @click="goRebind"
             >
               <RefreshCw class="w-3 h-3" />
-              重新绑定
+              {{ hasDeviceCode ? '重新绑定' : '立即绑定' }}
             </button>
           </div>
         </div>
@@ -478,152 +482,148 @@ async function handleRedeemInvite() {
     </div>
 
     <!-- 兑换弹窗遮罩 -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div v-if="showRedeemModal" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40 px-4" @click.self="closeRedeemModal">
-          <div class="bg-white rounded-2xl shadow-xl w-full max-w-sm overflow-hidden">
-            <!-- 弹窗头部 -->
-            <div class="flex items-center justify-between px-5 pt-5 pb-2">
-              <h3 class="text-base font-semibold text-gray-900">
-                {{ redeemKind === 'vip' ? '续费 VIP' : '兑换签到次数' }}
-              </h3>
-              <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRedeemModal">
-                <X class="w-4 h-4" />
-              </button>
+    <AppDialog
+      :open="showRedeemModal"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="max-w-sm"
+      :fade="true"
+      :title="redeemKind === 'vip' ? '续费 VIP' : '兑换签到次数'"
+      @update:open="(v: boolean) => { if (!v) closeRedeemModal() }"
+    >
+      <!-- 弹窗头部 -->
+      <div class="flex items-center justify-between px-5 pt-5 pb-2">
+        <h3 class="text-base font-semibold text-gray-900">
+          {{ redeemKind === 'vip' ? '续费 VIP' : '兑换签到次数' }}
+        </h3>
+        <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRedeemModal">
+          <X class="w-4 h-4" />
+        </button>
+      </div>
+
+      <!-- 弹窗内容 -->
+      <div class="px-5 pb-5 space-y-4">
+        <!-- 兑换码输入 -->
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">{{ redeemKind === 'vip' ? 'VIP 兑换码' : '兑换码' }}</label>
+          <Input
+            v-model="redeemCodeText"
+            placeholder="请输入 CDK 兑换码"
+            :class="'h-10 text-sm' + (redeemError ? ' border-red-400 ring-1 ring-red-200' : '')"
+            @input="redeemError = ''"
+          />
+          <p v-if="redeemError" class="text-xs text-red-500 mt-1">{{ redeemError }}</p>
+        </div>
+
+        <!-- 验证码 -->
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">验证码</label>
+          <div class="flex gap-2">
+            <Input
+              v-model="captchaCode"
+              placeholder="输入验证码"
+              class="h-10 text-sm flex-1"
+            />
+            <img
+              v-if="captchaImage"
+              :src="captchaImage"
+              class="h-10 w-24 rounded-lg border border-gray-200 cursor-pointer bg-gray-50 object-contain"
+              @click="refreshCaptcha"
+              title="点击刷新验证码"
+            />
+            <div
+              v-else-if="captchaError"
+              class="h-10 w-24 rounded-lg border border-red-200 bg-red-50 flex items-center justify-center text-[10px] leading-tight text-red-400 text-center px-1 cursor-pointer"
+              title="点击重试"
+              @click="refreshCaptcha"
+            >
+              {{ captchaError }}
             </div>
-
-            <!-- 弹窗内容 -->
-            <div class="px-5 pb-5 space-y-4">
-              <!-- 兑换码输入 -->
-              <div>
-                <label class="block text-xs font-medium text-gray-500 mb-1.5">{{ redeemKind === 'vip' ? 'VIP 兑换码' : '兑换码' }}</label>
-                <Input
-                  v-model="redeemCodeText"
-                  placeholder="请输入 CDK 兑换码"
-                  :class="'h-10 text-sm' + (redeemError ? ' border-red-400 ring-1 ring-red-200' : '')"
-                  @input="redeemError = ''"
-                />
-                <p v-if="redeemError" class="text-xs text-red-500 mt-1">{{ redeemError }}</p>
-              </div>
-
-              <!-- 验证码 -->
-              <div>
-                <label class="block text-xs font-medium text-gray-500 mb-1.5">验证码</label>
-                <div class="flex gap-2">
-                  <Input
-                    v-model="captchaCode"
-                    placeholder="输入验证码"
-                    class="h-10 text-sm flex-1"
-                  />
-                  <img
-                    v-if="captchaImage"
-                    :src="captchaImage"
-                    class="h-10 w-24 rounded-lg border border-gray-200 cursor-pointer bg-gray-50 object-contain"
-                    @click="refreshCaptcha"
-                    title="点击刷新验证码"
-                  />
-                  <div
-                    v-else-if="captchaError"
-                    class="h-10 w-24 rounded-lg border border-red-200 bg-red-50 flex items-center justify-center text-[10px] leading-tight text-red-400 text-center px-1 cursor-pointer"
-                    title="点击重试"
-                    @click="refreshCaptcha"
-                  >
-                    {{ captchaError }}
-                  </div>
-                  <div v-else class="h-10 w-24 rounded-lg border border-gray-200 bg-gray-50 flex items-center justify-center text-xs text-gray-400">
-                    加载中
-                  </div>
-                </div>
-              </div>
-
-              <!-- 兑换按钮 -->
-              <Button
-                class="w-full h-10 text-sm font-medium"
-                :disabled="redeeming"
-                @click="handleRedeem"
-              >
-                <RefreshCw v-if="redeeming" class="h-4 w-4 animate-spin" />
-                <Gift v-else class="h-4 w-4" />
-                {{ redeeming ? '兑换中...' : '立即兑换' }}
-              </Button>
+            <div v-else class="h-10 w-24 rounded-lg border border-gray-200 bg-gray-50 flex items-center justify-center text-xs text-gray-400">
+              加载中
             </div>
           </div>
         </div>
-      </Transition>
-    </Teleport>
+
+        <!-- 兑换按钮 -->
+        <Button
+          class="w-full h-10 text-sm font-medium"
+          :disabled="redeeming"
+          @click="handleRedeem"
+        >
+          <RefreshCw v-if="redeeming" class="h-4 w-4 animate-spin" />
+          <Gift v-else class="h-4 w-4" />
+          {{ redeeming ? '兑换中...' : '立即兑换' }}
+        </Button>
+      </div>
+    </AppDialog>
 
     <!-- 随机绑定设备码：连续两次风险确认弹窗 -->
-    <Teleport to="body">
-      <div v-if="randBindStep > 0" class="fixed inset-0 z-50 flex items-center justify-center bg-black/40 px-4" @click.self="closeRandomBind">
-        <div class="bg-white rounded-2xl shadow-xl w-full max-w-sm overflow-hidden">
-          <!-- 第一次确认 -->
-          <template v-if="randBindStep === 1">
-            <div class="px-5 pt-5 pb-2 flex items-center justify-between">
-              <h3 class="text-base font-semibold text-gray-900">随机生成设备码</h3>
-              <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRandomBind">
-                <X class="w-4 h-4" />
-              </button>
-            </div>
-            <div class="px-5 pb-5">
-              <div class="flex items-start gap-2.5 bg-amber-50 border border-amber-200 rounded-lg p-3">
-                <TriangleAlert class="w-4 h-4 text-amber-500 flex-shrink-0 mt-0.5" />
-                <p class="text-xs text-amber-700 leading-relaxed">
-                  随机设备码与你真实手机不一致。若你已有绑定的手机在用本系统，随机后该手机执行签到时会出现
-                  <strong>「频繁切换设备」提示，无法正常签到</strong>。
-                </p>
-              </div>
-              <p class="text-xs text-gray-400 mt-3">仅建议目前依旧因为其他人帮忙打卡/其他设备打卡导致已经出现「频繁切换设备」提示的用户使用。</p>
-              <div class="flex gap-2 mt-4">
-                <Button variant="outline" class="flex-1 h-10 text-sm" @click="closeRandomBind">取消</Button>
-                <Button class="flex-1 h-10 text-sm font-medium" @click="confirmRandomBind">继续</Button>
-              </div>
-            </div>
-          </template>
-
-          <!-- 第二次确认 -->
-          <template v-else>
-            <div class="px-5 pt-5 pb-2 flex items-center justify-between">
-              <h3 class="text-base font-semibold text-red-600">再次确认：确定随机？</h3>
-              <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRandomBind">
-                <X class="w-4 h-4" />
-              </button>
-            </div>
-            <div class="px-5 pb-5">
-              <p class="text-sm text-gray-600 leading-relaxed">
-                随机后，你现有手机登录 App 执行签到时将提示
-                <strong class="text-red-500">「频繁切换设备」而无法正常签到</strong>，
-                需要重新扫码授权绑定才能恢复。
-              </p>
-              <p class="text-xs text-gray-400 mt-2">这是最后一次确认，确定要随机生成设备码吗？</p>
-              <div class="flex gap-2 mt-4">
-                <Button variant="outline" class="flex-1 h-10 text-sm" @click="closeRandomBind">取消</Button>
-                <Button
-                  class="flex-1 h-10 text-sm font-medium bg-red-500 hover:bg-red-600"
-                  :disabled="randBinding"
-                  @click="confirmRandomBind"
-                >
-                  <RefreshCw v-if="randBinding" class="h-4 w-4 animate-spin" />
-                  {{ randBinding ? '绑定中...' : '确定随机' }}
-                </Button>
-              </div>
-            </div>
-          </template>
+    <AppDialog
+      :open="randBindStep > 0"
+      variant="center"
+      wrapper-class="px-4"
+      panel-class="max-w-sm"
+      title="随机绑定"
+      @update:open="(v: boolean) => { if (!v) closeRandomBind() }"
+    >
+      <!-- 第一次确认 -->
+      <template v-if="randBindStep === 1">
+        <div class="px-5 pt-5 pb-2 flex items-center justify-between">
+          <h3 class="text-base font-semibold text-gray-900">随机生成设备码</h3>
+          <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRandomBind">
+            <X class="w-4 h-4" />
+          </button>
         </div>
-      </div>
-    </Teleport>
+        <div class="px-5 pb-5">
+          <div class="flex items-start gap-2.5 bg-amber-50 border border-amber-200 rounded-lg p-3">
+            <TriangleAlert class="w-4 h-4 text-amber-500 flex-shrink-0 mt-0.5" />
+            <p class="text-xs text-amber-700 leading-relaxed">
+              随机设备码与你真实手机不一致。若你已有绑定的手机在用本系统，随机后该手机执行签到时会出现
+              <strong>「频繁切换设备」提示，无法正常签到</strong>。
+            </p>
+          </div>
+          <p class="text-xs text-gray-400 mt-3">仅建议目前依旧因为其他人帮忙打卡/其他设备打卡导致已经出现「频繁切换设备」提示的用户使用。</p>
+          <div class="flex gap-2 mt-4">
+            <Button variant="outline" class="flex-1 h-10 text-sm" @click="closeRandomBind">取消</Button>
+            <Button class="flex-1 h-10 text-sm font-medium" @click="confirmRandomBind">继续</Button>
+          </div>
+        </div>
+      </template>
+
+      <!-- 第二次确认 -->
+      <template v-else>
+        <div class="px-5 pt-5 pb-2 flex items-center justify-between">
+          <h3 class="text-base font-semibold text-red-600">再次确认：确定随机？</h3>
+          <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeRandomBind">
+            <X class="w-4 h-4" />
+          </button>
+        </div>
+        <div class="px-5 pb-5">
+          <p class="text-sm text-gray-600 leading-relaxed">
+            随机后，你现有手机登录 App 执行签到时将提示
+            <strong class="text-red-500">「频繁切换设备」而无法正常签到</strong>，
+            需要重新扫码授权绑定才能恢复。
+          </p>
+          <p class="text-xs text-gray-400 mt-2">这是最后一次确认，确定要随机生成设备码吗？</p>
+          <div class="flex gap-2 mt-4">
+            <Button variant="outline" class="flex-1 h-10 text-sm" @click="closeRandomBind">取消</Button>
+            <Button
+              class="flex-1 h-10 text-sm font-medium bg-red-500 hover:bg-red-600"
+              :disabled="randBinding"
+              @click="confirmRandomBind"
+            >
+              <RefreshCw v-if="randBinding" class="h-4 w-4 animate-spin" />
+              {{ randBinding ? '绑定中...' : '确定随机' }}
+            </Button>
+          </div>
+        </div>
+      </template>
+    </AppDialog>
   </div>
 </template>
 
 <style scoped>
-.fade-enter-active,
-.fade-leave-active {
-  transition: opacity 0.2s ease;
-}
-.fade-enter-from,
-.fade-leave-to {
-  opacity: 0;
-}
-
 /* VIP 徽标：金色渐变 + 反光条扫过动画
    注意：不可设置 position，徽标由模板上的 Tailwind absolute 类控制浮层定位，
    若此处声明 position:relative 会覆盖 absolute，导致徽标挤进头像布局使其变形 */

frondend/src/views/ticket/TicketList.vue

@@ -4,6 +4,7 @@ import { useRouter } from 'vue-router'
 import { MessageSquare, Plus, ArrowLeft, Send, X, Trash2 } from 'lucide-vue-next'
 import { Button } from '@/components/ui/button'
 import { Input } from '@/components/ui/input'
+import AppDialog from '@/components/ui/dialog/AppDialog.vue'
 import { useMessage } from '@/composables/useMessage'
 import * as ticketApi from '@/api/ticket'
 import type { TicketListItem } from '@/api/ticket'
@@ -170,59 +171,48 @@ async function handleDelete(t: TicketListItem, e: Event) {
     </div>
 
     <!-- 新建工单弹窗 -->
-    <Teleport to="body">
-      <Transition name="fade">
-        <div v-if="showCreate" class="fixed inset-0 z-50 flex items-end sm:items-center justify-center bg-black/40" @click.self="closeCreate">
-          <div class="bg-white rounded-t-2xl sm:rounded-2xl shadow-xl w-full max-w-sm overflow-hidden max-h-[85vh] flex flex-col">
-            <!-- 弹窗头部 -->
-            <div class="flex items-center justify-between px-5 pt-5 pb-2 flex-shrink-0">
-              <h3 class="text-base font-semibold text-gray-900">新建工单</h3>
-              <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeCreate">
-                <X class="w-4 h-4" />
-              </button>
-            </div>
+    <AppDialog
+      :open="showCreate"
+      :fade="true"
+      panel-class="max-w-sm"
+      title="新建工单"
+      @update:open="(v: boolean) => { if (!v) closeCreate() }"
+    >
+      <!-- 弹窗头部 -->
+      <div class="flex items-center justify-between px-5 pt-5 pb-2 flex-shrink-0">
+        <h3 class="text-base font-semibold text-gray-900">新建工单</h3>
+        <button class="w-7 h-7 rounded-full bg-gray-100 flex items-center justify-center text-gray-400 hover:text-gray-600" @click="closeCreate">
+          <X class="w-4 h-4" />
+        </button>
+      </div>
 
-            <!-- 弹窗内容 -->
-            <div class="px-5 pb-5 space-y-4 overflow-y-auto">
-              <div>
-                <label class="block text-xs font-medium text-gray-500 mb-1.5">工单标题</label>
-                <Input
-                  v-model="createTitle"
-                  placeholder="请简要描述您的问题"
-                  class="h-10 text-sm"
-                />
-              </div>
-              <div>
-                <label class="block text-xs font-medium text-gray-500 mb-1.5">具体内容</label>
-                <textarea
-                  v-model="createContent"
-                  placeholder="请详细描述您遇到的问题..."
-                  class="w-full h-32 px-3 py-2.5 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
-                ></textarea>
-              </div>
-              <Button
-                class="w-full h-10 text-sm font-medium"
-                :disabled="creating"
-                @click="handleCreate"
-              >
-                <template v-if="creating">提交中...</template>
-                <template v-else>提交工单</template>
-              </Button>
-            </div>
-          </div>
+      <!-- 弹窗内容 -->
+      <div class="px-5 pb-5 space-y-4 overflow-y-auto">
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">工单标题</label>
+          <Input
+            v-model="createTitle"
+            placeholder="请简要描述您的问题"
+            class="h-10 text-sm"
+          />
         </div>
-      </Transition>
-    </Teleport>
+        <div>
+          <label class="block text-xs font-medium text-gray-500 mb-1.5">具体内容</label>
+          <textarea
+            v-model="createContent"
+            placeholder="请详细描述您遇到的问题..."
+            class="w-full h-32 px-3 py-2.5 text-sm border border-gray-200 rounded-lg resize-none focus:outline-none focus:ring-2 focus:ring-blue-500/20 focus:border-blue-400"
+          ></textarea>
+        </div>
+        <Button
+          class="w-full h-10 text-sm font-medium"
+          :disabled="creating"
+          @click="handleCreate"
+        >
+          <template v-if="creating">提交中...</template>
+          <template v-else>提交工单</template>
+        </Button>
+      </div>
+    </AppDialog>
   </div>
 </template>
-
-<style scoped>
-.fade-enter-active,
-.fade-leave-active {
-  transition: opacity 0.2s ease;
-}
-.fade-enter-from,
-.fade-leave-to {
-  opacity: 0;
-}
-</style>

frondend/vite.config.ts

@@ -10,6 +10,13 @@ export default defineConfig({
       '@': fileURLToPath(new URL('./src', import.meta.url)),
     },
   },
+  // 向下兼容国产浏览器/微信内置内核（日志实测存在 Chrome 78/85/91/97 等机型）。
+  // 默认 target "baseline-widely-available" 会产出可选链/空值合并等新语法，
+  // Chrome 80 以下直接解析失败白屏；统一降到 chrome78（微信 XWEB 常见下限）。
+  // 注：CSS 侧的 @layer/oklch 兼容由 scripts/postbuild-css.mjs 处理。
+  build: {
+    target: 'chrome78',
+  },
   server: {
     port: 3300,
     proxy: {